Revision of analytical strategies to evaluate different migrants from food packaging materials

In order to carry out a compilation of the available information on analytical methods for determination of some model migrants in selected foodstuffs, an extensive bibliographic review was done. Model migrants of different chemical structures, polarities, lipophilicity and molecular weight have been selected: styrene, bisphenol A, 1-octene, limonene, di-isopropylnaphthalene (DIPN), laurolactam, triacetin, tri-n-butylacetyl citrate (ATBC), butylated hydroxytoluene (BHT) and Triclosan. Suggestions regarding the analytical procedure more convenient to determine the 10 model migrants studied in this review are given.

[1]  M. Jägerstad,et al.  Mobility of α‐tocopherol and BHT in LDPE in contact with fatty food simulants , 1998 .

[2]  R. Franz.  Programme on the recyclability of food-packaging materials with respect to food safety considerations: polyethylene terephthalate (PET), paper and board, and plastics covered by functional barriers , 2002, Food additives and contaminants.

[3]  I. Martínez-Castro,et al.  Direct thermal desorption in the analysis of cheese volatiles by gas chromatography and gas chromatography-mass spectrometry: comparison with simultaneous distillation-extraction and dynamic headspace. , 2001, Journal of chromatographic science.

[4]  H. Nakazawa,et al.  Determination of bisphenol A in canned vegetables and fruit by high performance liquid chromatography , 2001, Food additives and contaminants.

[5]  C. Nerín,et al.  A GC/MS Method for Determining UV Stabilizers in Polyethyleneterephthalate Bottles , 1998 .

[6]  T. Shibamoto,et al.  Analysis of Volatile Compounds Formed from Fish Oil Heated with Cysteine and Trimethylamine Oxide , 1998 .

[7]  M. Marı́n,et al.  Determination of adipate plasticizers in poly(vinyl chloride) by microwave-assisted extraction. , 2002, Journal of chromatography. A.

[8]  T. Begley,et al.  Determination of Bisphenol-A in Reusable Polycarbonate Food-Contact Plastics and Migration to Food-Simulating Liquids , 1997 .

[9]  Youn Suk Lee,et al.  Effectiveness of antioxidant-impregnated film in retarding lipid oxidation , 2004 .

[10]  O. Lau,et al.  Determination of plasticisers in food by gas chromatography-mass spectrometry with ion-trap mass detection. , 1996, Journal of chromatography. A.

[11]  S. L. Varner,et al.  Headspace sampling and gas chromatographic determination of styrene migration from food-contact polystyrene cups into beverages and food simulants. , 1981, Journal - Association of Official Analytical Chemists.

[12]  W. M. Haynes,et al.  Handbook of chemistry and physics : a ready-reference pocket book of chemical and physical data , 1922 .

[13]  M. D’Auria,et al.  The use of SPME-GC-MS in the analysis of flavor of virgin olive oil , 2001 .

[14]  L. Castle,et al.  Analysis of the plasticiser acetyltributyl citrate in foods by stable isotope dilution gas chromatography-mass spectrometry , 1988 .

[15]  A. Voragen,et al.  Influence of flavour absorption on oxygen permeation through LDPE, PP, PC and PET plastics food packaging , 2002, Food additives and contaminants.

[16]  A. Feigenbaum,et al.  Safety and quality of food contact materials. Part 1: Evaluation of analytical strategies to introduce migration testing into good manufacturing practice , 2002, Food Additives and Contaminants.

[17]  J. Lozano,et al.  Determination of Bisphenols A and F in Noncured Epoxy Resins by RP-HPLC—Fluorescence Techniques , 1993 .

[18]  F. C. Silva,et al.  Solid-phase microextraction method for the quantitative analysis of styrene in water. , 2000, Journal of chromatographic science.

[19]  C. Pérès,et al.  Fast characterization of cheeses by dynamic headspace-mass spectrometry. , 2002, Analytical chemistry.

[20]  L. Castle,et al.  Investigations into the potential degradation of polycarbonate baby bottles during sterilization with consequent release of bisphenol A. , 1997, Food additives and contaminants.

[21]  P. Demertzis,et al.  Migration studies from recycled paper packaging materials: development of an analytical method for rapid testing , 2002 .

[22]  A. Huyghebaert,et al.  Polystyrene cups and containers: styrene migration. , 1998, Food additives and contaminants.

[23]  J. López‐Cervantes,et al.  Determination of bisphenol A in, and its migration from, PVC stretch film used for food packaging , 2003, Food additives and contaminants.

[24]  H. Nakazawa,et al.  Analysis of plasticizers in cap-sealing resins for bottled foods , 2001, Food additives and contaminants.

[25]  S. Howe,et al.  Potential exposure to bisphenol A from food-contact use of polycarbonate resins. , 1998, Food additives and contaminants.

[26]  C. Pérès,et al.  Solid-phase microextraction-mass spectrometry: a new approach to the rapid characterization of cheeses. , 2001, Analytical chemistry.

[27]  J. Vargo,et al.  Identification of Antioxidant and Ultraviolet Light Stabilizing Additives in Plastics by Liquid Chromatography/Mass Spectrometry , 1985 .

[28]  Robert C. Weast,et al.  Handbook of chemistry and physics : a readyreference book of chemical and physical data , 1972 .

[29]  A. Jiménez,et al.  Analysis of citrates and benzoates used in poly(vinyl chloride) by supercritical fluid extraction and gas chromatography. , 2002, Journal of chromatography. A.

[30]  L. Rossi,et al.  European priorities for research to support legislation in the area of food contact materials and articles , 2000, Food additives and contaminants.

[31]  Norma B Tombesi,et al.  Application of solid-phase microextraction combined with gas chromatography-mass spectrometry to the determination of butylated hydroxytoluene in bottled drinking water. , 2002, Journal of chromatography. A.

[32]  L. Castle,et al.  Evaluation of some screening methods for the analysis of contaminants in recycled polyethylene terephthalate flakes , 2003, Food additives and contaminants.

[33]  C. Gesumundo,et al.  Potential migration of diisopropyl naphthalenes from recycled paperboard packaging into dry foods. , 1999, Food additives and contaminants.

[34]  J.B.H. van Lierop,et al.  Determination of plasticizers in fat by gas chromatography-mass spectrometry , 1988 .

[35]  T. Shibamoto,et al.  Analysis of headspace volatiles from overheated beef fat , 1987 .

[36]  P. Paseiro-Losada,et al.  Determination of triclosan in foodstuffs. , 2005, Journal of separation science.

[37]  M. Jordán,et al.  Aroma active components in aqueous kiwi fruit essence and kiwi fruit puree by GC-MS and multidimensional GC/GC-O. , 2002, Journal of agricultural and food chemistry.

[38]  J. W. Gramshaw,et al.  Compositional analysis of samples of thermoset polyester and migration of ethylbenzene and styrene from thermoset polyester into pork during cooking. , 1995, Food additives and contaminants.

[39]  M. Posthumus,et al.  Combined gas chromatography and sniffing port analysis of volatile compounds of mineral water packed in polyethylene laminated packages , 1993 .

[40]  A. Taylor,et al.  Infusion of volatile flavor compounds into low-density polyethylene. , 2001, Journal of agricultural and food chemistry.

[41]  A. Voragen,et al.  Influence of food matrix on absorption of flavour compounds by linear low-density polyethylene: oil and real food products. , 2000 .

[42]  J. Simal-Gándara,et al.  Tests of potential functional barriers for laminated multilayer food packages. Part II: Medium molecular weight permeants , 2000, Food additives and contaminants.

[43]  Susan Budavari,et al.  The Merck index : an encyclopedia of chemicals, drugs, and biologicals , 1983 .

[44]  D. Dainelli,et al.  Safety evaluation of an ionized multilayer plastic film used for vacuum cooking and meat preservation. , 1998, Food additives and contaminants.

[45]  R. Cava,et al.  Monitoring volatile compounds during dry-cured ham ripening by solid-phase microextraction coupled to a new direct-extraction device. , 2002, Journal of chromatography. A.

[46]  I. Arvanitoyannis,et al.  Migration of Substances from Food Packaging Materials to Foods , 2004, Critical reviews in food science and nutrition.

[47]  L. Castle,et al.  Migration of styrene monomer from thermoset polyester cookware into foods during high temperature applications. , 1993, Food additives and contaminants.

[48]  R. Franz,et al.  Development and validation of analytical methods for monomeric and oligomeric migrants from nylon 12 packaging materials , 2003, Food additives and contaminants.

[49]  W. Summerfield,et al.  Investigation of migration from paper and board into food-development of methods for rapid testing , 2001, Food additives and contaminants.

[50]  J. M. López-Vilariño,et al.  Determination of antioxidants by solid-phase extraction method in aqueous food simulants. , 2005, Talanta.

[51]  A. Voragen,et al.  Influence of flavour absorption by food-packaging materials (low-density polyethylene, polycarbonate and polyethylene terephthalate) on taste perception of a model solution and orange juice , 2003, Food additives and contaminants.

[52]  Jeong-Hun Kang,et al.  Bisphenol A migration from cans containing coffee and caffeine , 2002, Food additives and contaminants.

[53]  George W. A. Milne,et al.  Properties of organic compounds , 1996 .

[54]  H. Soto‐Valdez,et al.  Effect of heat processing and storage time on migration of bisphenol A (BPA) and bisphenol A-diglycidyl ether (BADGE) to aqueous food simulant from Mexican can coatings. , 2001, Journal of agricultural and food chemistry.