Robust Beamforming and Phase Shift Design for IRS-Enhanced Multi-User MISO Downlink Communication

Intelligent reflecting surface (IRS), with a large number of reflective elements, is a promising technology to achieve both spectrum and energy efficient wireless communication. The IRS can reflect the incident electromagnetic wave passively and steer it to the desirable way before reaching the intended receiver by adjusting the phase shift on the reflective elements. In order to better improve communication quality, the beamforming vector at the base station (BS) and the phase shift induced by the IRS should be jointly designed carefully. However, thus far, previous works on IRS have assumed that the channel state information (CSI) is perfectly known at the BS, which is not available in the practical systems. In this paper, we study an IRS-enhanced multi-user multiple-input single-output (MISO) downlink communication system assuming imperfect CSI. An optimization problem is formulated to jointly optimize the beamforming vector at the BS and the phase shift at the IRS such that the total transmit power is minimized under the individual outage probability constraints. An algorithm based on alternating optimization (AO) and semi-definite relaxation (SDR) is proposed to solve this challenging non-convex problem. Finally, numerical results have validated the effectiveness of the proposed algorithm.

[1]  Shi Jin,et al.  Large Intelligent Surface-Assisted Wireless Communication Exploiting Statistical CSI , 2018, IEEE Transactions on Vehicular Technology.

[2]  Qingqing Wu,et al.  Beamforming Optimization for Intelligent Reflecting Surface with Discrete Phase Shifts , 2018, ICASSP 2019 - 2019 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP).

[3]  Pei-Jung Chung,et al.  A Probabilistic Constraint Approach for Robust Transmit Beamforming With Imperfect Channel Information , 2009, IEEE Transactions on Signal Processing.

[4]  M. B. Shenouda,et al.  Probabilistically-constrained approaches to the design of the multiple antenna downlink , 2008, 2008 42nd Asilomar Conference on Signals, Systems and Computers.

[5]  Rui Zhang,et al.  Intelligent Reflecting Surface Assisted Secrecy Communication via Joint Beamforming and Jamming , 2019, ArXiv.

[6]  Jie Chen,et al.  Intelligent Reflecting Surface: A Programmable Wireless Environment for Physical Layer Security , 2019, IEEE Access.

[7]  Nikos D. Sidiropoulos,et al.  Transmit beamforming for physical-layer multicasting , 2006, IEEE Transactions on Signal Processing.

[8]  Chau Yuen,et al.  Reconfigurable Intelligent Surfaces for Energy Efficiency in Wireless Communication , 2018, IEEE Transactions on Wireless Communications.

[9]  Håkan Johansson,et al.  Channel Estimation and Low-complexity Beamforming Design for Passive Intelligent Surface Assisted MISO Wireless Energy Transfer , 2019, ICASSP 2019 - 2019 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP).

[10]  Jie Chen,et al.  Large Intelligent Surface/Antennas (LISA): Making Reflective Radios Smart , 2019, J. Commun. Inf. Networks.

[11]  Chong-Yung Chi,et al.  Outage Constrained Robust Transmit Optimization for Multiuser MISO Downlinks: Tractable Approximations by Conic Optimization , 2011, IEEE Transactions on Signal Processing.

[12]  Wing-Kin Ma,et al.  Low-Complexity Robust MISO Downlink Precoder Design Under Imperfect CSI , 2016, IEEE Transactions on Signal Processing.

[13]  Qingqing Wu,et al.  Intelligent Reflecting Surface Enhanced Wireless Network via Joint Active and Passive Beamforming , 2018, IEEE Transactions on Wireless Communications.