Diamond like carbon coatings for tribology: production techniques, characterisation methods and applications
暂无分享,去创建一个
[1] John Robertson,et al. Preparation of tetrahedral amorphous carbon films by filtered cathodic vacuum arc deposition , 2000 .
[2] J. Robertson,et al. Temperature dependence of the formation of highly tetrahedral a-C:H , 1996 .
[3] R. Narayan. Laser processing of diamondlike carbon thin films for medical prostheses , 2006 .
[4] I. Sugimoto,et al. Oriented hydrocarbons transferred from a high performance lubricative amorphous C:H:Si film during sliding in a vacuum , 1990 .
[5] Hydrogen and disorder in diamond-like carbon , 2001 .
[6] S. Miyake. Tribological properties of hard carbon films: extremely low friction mechanism of amorphous hydrogenated carbon films and amorphous hydrogenated SiC films in vacuum , 1992 .
[7] J. Robertson. Diamond-like amorphous carbon , 2002 .
[8] B. Bhushan,et al. Micromechanical properties of amorphous carbon coatings deposited by different deposition techniques , 1995 .
[9] Staffan Jacobson,et al. A new test method for the intrinsic abrasion resistance of thin coatings , 1991 .
[10] J. McLaughlin,et al. A study of ta-C, a-C:H and Si-a:C:H thin films on polymer substrates as a gas barrier , 2004 .
[11] M. Gee,et al. Ball crater testing for the measurement of the unlubricated sliding wear of wear-resistant coatings , 2000 .
[12] V. Tiainen. Amorphous carbon as a bio-mechanical coating — mechanical properties and biological applications , 2001 .
[13] J. Robertson,et al. Direct quantitative detection of the sp3 bonding in diamond-like carbon films using ultraviolet and visible Raman spectroscopy , 2000 .
[14] Mats Larsson,et al. ME-C:H coatings in motor vehicles , 2001 .
[15] D. Tabor. Hardness of Metals , 1937, Nature.
[16] Shui-Tong Lee,et al. Deposition of ultra-thin diamond-like carbon protective coating on magnetic disks by electron cyclotron resonance plasma technique , 1999 .
[17] P. A. Willermet,et al. Mechanism of formation of antiwear films from zinc dialkyldithiophosphates , 1995 .
[18] D. Mckenzie. Tetrahedral bonding in amorphous carbon , 1996 .
[19] K. Trojan,et al. Application-oriented modifications of deposition processes for diamond-like-carbon-based coatings , 1995 .
[20] G. Stoney. The Tension of Metallic Films Deposited by Electrolysis , 1909 .
[21] K. Holmberg,et al. COMPARATIVE TRIBOLOGICAL AND ADHESION STUDIES OF SOME TITANIUM-BASED CERAMIC COATINGS , 1990 .
[22] George M. Pharr,et al. On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation , 1992 .
[23] C. Achete,et al. Fracture toughness, hardness and elastic modulus of hydrogenated amorphous carbon films deposited by chemical vapor deposition , 2006 .
[24] A. M. Baranov,et al. Planarization of substrate surface by means of ultrathin diamond-like carbon film , 1998 .
[25] R. Standley,et al. Determination of bonding in amorphous carbon films: a quantitative comparison of core-electron energy-loss spectroscopy and 13C nuclear magnetic resonance spectroscopy , 1986 .
[26] R. E. Rawles,et al. Mechanism of surface smoothing of diamond by a hydrogen plasma , 1997 .
[27] Jože Vižintin,et al. A comparison of the tribological behaviour of steel/steel, steel/DLC and DLC/DLC contacts when lubricated with mineral and biodegradable oils , 2006 .
[28] S. Aisenberg,et al. Ion Beam and Ion-Assisted Deposition of Diamond-Like Carbon Films , 1991 .
[29] H. L. Riley,et al. 87. Amorphous carbon , 1946 .
[30] D. Mckenzie,et al. EELS analysis of vacuum arc-deposited diamond-like films , 1988 .
[31] D. S. Rickerby,et al. The use of scratch adhesion testing for the determination of interfacial adhesion: The importance of frictional drag , 1988 .
[32] B. Mcnamara,et al. Adhesion properties of diamond-like coated orthopaedic biomaterials , 2001 .
[33] D. S. Rickerby,et al. The mechanical properties of wear-resistant coatings: I: Modelling of hardness behaviour , 1987 .
[34] P. A. Willermet,et al. Amorphous hydrogenated carbon films for tribological applications , 1995 .
[35] Aaas News,et al. Book Reviews , 1893, Buffalo Medical and Surgical Journal.
[36] B. Tay,et al. Mechanical properties and Raman spectra of tetrahedral amorphous carbon films with high sp3 fraction deposited using a filtered cathodic arc , 1997 .
[37] P. Siemroth,et al. Pulsed arc deposition of super-hard amorphous carbon films , 2004 .
[38] J. Field. The Properties of Diamond , 1979 .
[39] George R. Fenske,et al. Synthesis of superlow-friction carbon films from highly hydrogenated methane plasmas☆ , 2000 .
[40] Kwang-Ryeol Lee,et al. Structure and optical properties of Si incorporated diamond-like carbon films deposited by r.f. plasma-assisted chemical vapor deposition , 1999 .
[41] C. V. Cooper,et al. The effect of TiN interlayers on the indentation behavior of diamond-like carbon films on alloy and compound substrates , 1994 .
[42] R. T. Pascoe,et al. A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements , 1981 .
[43] Zhili Sun,et al. Properties of fluorinated amorphous diamond like carbon films by PECVD , 2003 .
[44] T. Staedler,et al. Influence of substrate material and topography on the tribological behaviour of submicron coatings , 2003 .
[45] William D. Nix,et al. Effects of the substrate on the determination of thin film mechanical properties by nanoindentation , 2002 .
[46] D. Chuu,et al. Nanoindentation investigation of amorphous hydrogenated carbon thin films deposited by ECR-MPCVD , 2004 .
[47] E. Meletis,et al. Structure-property relationship of Si-DLC films , 2001 .
[48] G. Pharr,et al. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .
[49] P. Fournier,et al. Test temperature effect on the tribological behavior of DLC-coated 100C6-steel couples in dry friction , 2003 .
[50] J. Robertson,et al. Density, sp 3 fraction, and cross-sectional structure of amorphous carbon films determined by x-ray reflectivity and electron energy-loss spectroscopy , 2000 .
[51] M. Kalin,et al. The lubrication of DLC coatings with mineral and biodegradable oils having different polar and saturation characteristics , 2006 .
[52] H. Ehrhardt,et al. Characterization of the sp2 bonds network in a-C:H layers with nuclear magnetic resonance, electron energy loss spectroscopy and electron spin resonance , 1991 .
[53] Pan,et al. Local coordination of carbon atoms in amorphous carbon. , 1991, Physical review. B, Condensed matter.
[54] William D. Nix,et al. A method for interpreting the data from depth-sensing indentation instruments , 1986 .
[55] NMR EVIDENCE FOR STRAINED CARBON BONDING IN TETRAHEDRAL AMORPHOUS CARBON , 1995 .
[56] D. Kwon,et al. Micromechanical analysis on residual stress-induced nanoindentation depth shifts in DLC films , 2004 .
[57] P. Koidl,et al. Plasma Deposition, Properties and Structure of Amorphous Hydrogenated Carbon Films , 1991 .
[58] Rusli,et al. Deposition of hydrogenated diamond-like carbon films under the impact of energetic hydrocarbon ions , 1998 .
[59] M. Larsson,et al. The crater grinder method as a means for coating wear evaluation — an update , 1997 .
[60] D. Teer,et al. Performance of low friction MoS2/titanium composite coatings used in forming applications , 2000 .
[61] A. Voevodin,et al. Preparation of amorphous diamond-like carbon by pulsed laser deposition: a critical review , 1996 .
[62] S-shaped magnetic macroparticle filter for cathodic arc deposition , 1996 .
[63] I. L. Singer,et al. Role of third bodies in friction and wear of protective coatings , 2003 .
[64] Andrew G. Glen,et al. APPL , 2001 .
[65] R. Hauert,et al. The coefficient of static friction of silicon containing diamond-like carbon films , 2004 .
[66] P. A. Willermet,et al. Amorphous hydrogenated carbon films for tribological applications I. Development of moisture insensitive films having reduced compressive stress , 1997 .
[67] B. Tay,et al. Spectroscopic ellipsometry studies of tetrahedral amorphous carbon prepared by filtered cathodic vacuum arc technique , 1998 .
[68] C. Fountzoulas,et al. Effect of annealing on the cohesion, adhesion, and tribological behavior of amorphous silicon-containing diamond-like carbon (Si-DLC) coatings on steel , 2000 .
[69] M. Nastasi,et al. Fracture toughness of diamondlike carbon coatings , 1999 .
[70] J. M. Martín,et al. Friction reduction by metal sulfides in boundary lubrication studied by XPS and XANES analyses , 2003 .
[71] S. Vepřek. Superhard nanocomposites: design concept, properties, present and future industrial applications , 2004 .
[72] J. Hirvonen,et al. Practical applications of ion beam and plasma processing for improving corrosion and wear protection , 2002 .
[73] J. Vižintin,et al. Combination of DLC coatings and EP additives for improved tribological behaviour of boundary lubricated surfaces , 2006 .
[74] M. Nastasi,et al. Investigation of mechanical and tribological properties of amorphous diamond-like carbon coatings , 1997 .
[75] S. Chung,et al. HYDROGEN-FREE DIAMOND-LIKE CARBON DEPOSITED BY A LAYER- BY-LAYER TECHNIQUE USING PECVD , 2000 .
[76] J. Hosson,et al. Properties and characterization of multilayers of carbides and diamond-like carbon , 2001 .
[77] A. Grill,et al. The respective role of oxygen and water vapor on the tribology of hydrogenated diamond-like carbon coatings , 1998 .
[78] Ian M. Hutchings,et al. Progress towards standardisation of ball cratering , 2003 .
[79] Yong Huan,et al. Nanoindentation and Nanoscratch Behaviors of DLC Coatings on Different Steel Substrates , 2005 .
[80] M. Schlatter. DLC-based wear protection on magnetic storage media , 2002 .
[81] A. Ogwu,et al. The influence of biological fluids on crack spacing distribution in Si-DLC films on steel substrates , 2003 .
[82] K. Komvopoulos,et al. Effect of vacuum arc deposition parameters on the properties of amorphous carbon thin films , 1994 .
[83] I. Hutchings,et al. The effects of ball surface condition in the micro‐scale abrasive wear test , 1998 .
[84] G. Vojta,et al. Fractal Concepts in Surface Growth , 1996 .
[85] I. Hutchings,et al. Theory and application of a micro-scale abrasive wear test , 1997 .
[86] K. Bewilogua,et al. DLC based coatings prepared by reactive d.c. magnetron sputtering , 2004 .
[87] T. Seong,et al. Structural dependence of mechanical properties of Si incorporated diamond-like carbon films deposited by RF plasma-assisted chemical vapour deposition , 1997 .
[88] I. N. Sneddon. The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile , 1965 .
[89] M. Leonhardt,et al. Ultra hydrophobic wetting behaviour of amorphous carbon films , 2005 .
[90] P. Fournier,et al. Tribological behaviour of DLC coatings compared to different materials used in hip joint prostheses , 2001 .
[91] G. Dearnaley,et al. Reduction of wear in critical engine components using ion-beam-assisted deposition and ion implantation , 1996 .
[92] C. Charitidis,et al. Nanoindentation studies of multilayer amorphous carbon films , 2004 .
[93] J. C. Knight,et al. Thermal instability of the microstructure and surface mechanical properties of hydrogenated amorphous carbon films , 1991 .
[94] Hugh O. Pierson,et al. Handbook of carbon, graphite, diamond, and fullerenes : properties, processing, and applications , 1993 .
[95] Steve Bull,et al. Failure mode maps in the thin film scratch adhesion test , 1997 .
[96] T. Fischer,et al. The effects of oxygen and humidity on friction and wear of diamond-like carbon films , 1991 .
[97] C. Donnet. Recent progress on the tribology of doped diamond-like and carbon alloy coatings: a review , 1998 .
[98] T. Tallián. On Competing Failure Modes in Rolling Contact , 1967 .
[99] M. Hon,et al. Effect of gradient a-SiCx interlayer on adhesion of DLC films , 2001 .
[100] I. Hutchings,et al. A micro-abrasive wear test, with particular application to coated systems , 1996 .
[101] C. Grossiord,et al. Transfer films and friction under boundary lubrication , 2000 .
[102] R. Hauert,et al. Comparative study of the tribological moisture sensitivity of Si-free and Si-containing diamond-like carbon films , 2000 .
[103] G. M. Z. Köcker,et al. Comprehensive tribological characterization of thin TiN-based coatings , 1995 .
[104] C. Schürer,et al. Diamond-like carbon-coated Ti6Al4V: influence of the coating thickness on the structure and the abrasive wear resistance , 2001 .
[105] Karin Persson,et al. Tribological performance of a DLC coating in combination with water-based lubricants , 2003 .
[106] A. Grill,et al. Solid state 13C and 1H nuclear magnetic resonance investigations of hydrogenated amorphous carbon , 1999 .
[107] K. Holmberg,et al. Differentiating the tribological performance of hydrogenated and hydrogen-free DLC coatings , 2001 .
[108] A. Barabasi,et al. Fractal Concepts in Surface Growth: Frontmatter , 1995 .
[109] Ali Erdemir,et al. The role of hydrogen in tribological properties of diamond-like carbon films☆ , 2001 .
[110] Zhihui Xu,et al. Nanoindentation on diamond-like carbon and alumina coatings , 2002 .
[111] M. Gardos. Tribological fundamentals of polycrystalline diamond films , 1999 .
[112] Frank Jansen,et al. Characterization of amorphous carbon‐hydrogen films by solid‐state nuclear magnetic resonance , 1985 .
[113] Bharat Bhushan,et al. Fracture Mechanisms of Thin Amorphous Carbon Films in Nanoindentation , 1997 .
[114] John Robertson,et al. Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon , 2001 .
[115] S. Hainsworth,et al. Time-dependent changes in the mechanical properties of diamond-like carbon films , 1999 .
[116] André Anders,et al. Approaches to rid cathodic arc plasmas of macro-and nanoparticles : a review , 1999 .
[117] D. R. Waterman,et al. Production and wetting properties of fluorinated diamond-like carbon coatings , 1997 .
[118] Kevin Barraclough,et al. I and i , 2001, BMJ : British Medical Journal.
[119] K. Niihara,et al. Microstructure and tribological properties of SiOx/DLC films grown by PECVD , 2005 .
[120] Sarah V. Hainsworth,et al. Using nanoindentation techniques for the characterization of coated systems: a critique , 1993 .
[121] K. Oguri,et al. Tribological properties and characterization of diamond-like carbon coatings with silicon prepared by plasma-assisted chemical vapour deposition , 1991 .
[122] R. Memming,et al. Properties of polymeric layers of hydrogenated amorphous carbon produced by a plasma-activated chemical vapour deposition process II: Tribological and mechanical properties , 1986 .
[123] Alex A. Volinsky,et al. Interfacial toughness measurements for thin films on substrates , 2002 .
[124] Brian R. Lawn,et al. A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I , 1981 .
[125] D. Sanders,et al. Magnetic enhancement of cathodic arc deposition , 1987 .
[126] I. Hutchings,et al. Properties of amorphous carbon-silicon alloys deposited by a high plasma density source , 2001 .
[127] Khellil Sefiane,et al. Heat transfer enhancement in heat pipe applications using surface coating , 2005 .
[128] The hardness and Young's modulus of a-C:H films , 1990 .
[129] J. Robertson,et al. Elastic constants of ultrathin diamond-like carbon films , 2000 .
[130] T. Page,et al. Mechanical property data for coated systems -- the prospects for measuring ``coating only`` properties using nanoindentation , 1996 .
[131] Jože Vižintin,et al. Tribological reactions between oil additives and DLC coatings for automotive applications , 2005 .
[132] R. Schumacher,et al. Umwelt—Forschung, Gestaltung, Schutz. Hrsg.: Verein Deutscher Ingenieure (VDI), VDI-Verlag, Düsseldorf. Erscheint zweimonatlich; DM: 24.— (Einzelheft DM 5.—) , 1971 .
[133] R. Hauert,et al. Control of the tribological moisture sensitivity of diamond-like carbon films by alloying with F, Ti or Si , 2001 .
[134] M. Hans,et al. High-volume PVD coating of precision components of large volumes at low process costs , 2000 .
[135] M. Boman,et al. Tribological evaluation of thermally activated CVD diamond-like carbon (DLC) coatings , 1997 .
[136] H. Y. Yu,et al. The effect of substrate on the elastic properties of films determined by the indentation test — axisymmetric boussinesq problem , 1990 .
[137] J. Robertson,et al. Elastic constants of tetrahedral amorphous carbon films by surface Brillouin scattering , 1999 .
[138] R. Jacobs,et al. Friction and wear behaviour of amorphous hydrogenated Si1−x Cx films , 1993 .
[139] Jäger,et al. Structural properties of amorphous hydrogenated carbon. III. NMR investigations. , 1994, Physical review. B, Condensed matter.
[140] I. Hutchings,et al. Transitions between two-body and three-body abrasive wear: influence of test conditions in the microscale abrasive wear test , 1999 .
[141] S. Berg,et al. Influence of substrate material on the initial thin film growth during ion deposition from a glow discharge , 1984 .
[142] Ali Erdemir,et al. Genesis of superlow friction and wear in diamondlike carbon films , 2004 .
[143] F. Hong,et al. Interfacial studies for improving the adhesion of diamond-like carbon films on steel , 2005 .
[144] J. Robertson,et al. Effects of deposition temperature on the properties of hydrogenated tetrahedral amorphous carbon , 1997 .
[145] S. Pepper. Effect of electronic structure of the diamond surface on the strength of the diamond-metal interface , 1982 .
[146] J. Kenny,et al. Pulsed PECVD deposition of diamond-like carbon films , 2002 .
[147] S. Hogmark,et al. Hardness measurements of thin films , 1984 .
[148] H. Sugimura,et al. Nanoindentation studies on amorphous carbon nitride thin films prepared by shielded arc ion plating , 2001 .
[149] C. Fountzoulas,et al. X-ray absorption spectroscopy, simulation and modeling of Si-DLC films , 2002 .
[150] D. Teer,et al. Novel high wear resistant diamond-like carbon coatings deposited by magnetron sputtering of carbon targets , 1998 .
[151] J. Vižintin,et al. Low-friction behaviour of boundary-lubricated diamond-like carbon coatings containing tungsten , 2005 .
[152] F. Svahn,et al. Method and surface roughness aspects for the design of DLC coatings , 2006 .
[153] A. Tanaka,et al. The effect of humidity on the tribological behavior of diamond-like carbon (DLC) film coated on WC-Co by physical vapor deposition method , 2000 .
[154] S. S. Camargo,et al. Optical and mechanical properties of DLC-Si coatings on polycarbonate , 2003 .
[155] H. Kaufman. Broad‐beam ion sources: Present status and future directions , 1986 .
[156] T. Page,et al. The nanoindentation response of systems with thin hard carbon coatings , 1993 .
[157] M. Larsson,et al. Mechanical and tribological evaluation of PVD WC/C coatings , 1999 .
[158] K. Oguri,et al. Low friction coatings of diamond-like carbon with silicon prepared by plasma-assisted chemical vapor deposition , 1990 .
[159] S. S. Camargo,et al. Deposition of Si-DLC films with high hardness, low stress and high deposition rates , 2000 .
[160] T. W. Clyne,et al. Surface roughness of diamond-like carbon films prepared using various techniques , 2001 .
[161] Wang Cheng-biao,et al. Investigation on preparation and properties of thick DLC film in medium-frequency dual-magnetron sputtering , 2005 .
[162] C. Ai,et al. Effect of nitrogen content at coating film and film thickness on nanohardness and Young's modulus of hydrogenated carbon films , 2004 .
[163] P. Juliet,et al. Mechanical properties of W and W(C) thin films : Young's modulus, fracture toughness and adhesion , 1998 .
[164] Kwang-Ryeol Lee,et al. Determination of elastic modulus and Poisson's ratio of diamond-like carbon films , 1999 .
[165] Bernd G. Pfrommer,et al. {ital Ab initio} NMR Chemical Shift of Diamond, Chemical-Vapor-Deposited Diamond, and Amorphous Carbon , 1997 .
[166] Q. Wei,et al. Superhard diamondlike carbon: preparation, theory, and properties , 2000 .
[167] Kenneth Holmberg,et al. Tribological performance of different DLC coatings in water-lubricated conditions , 2001 .
[168] T. Page,et al. Nanoindentation and microindentation studies of hard carbon on 304 stainless steel , 1992 .
[169] J. Robertson. The deposition mechanism of diamond-like a-C and a-C: H , 1994 .
[170] T. Saito,et al. Antithrombogenicity of fluorinated diamond-like carbon films , 2005 .
[171] J. Fujioka,et al. Tribological characteristics of Si-containing diamond-like carbon films under oil-lubrication , 2002 .
[172] S. S. Camargo,et al. Structural modifications and temperature stability of silicon incorporated diamond-like a-C:H films , 1998 .
[173] A. Grill,et al. Inhomogeneous carbon bonding in hydrogenated amorphous carbon films , 1987 .
[174] K. Oguri,et al. Two different low friction mechanisms of diamond-like carbon with silicon coatings formed by plasma-assisted chemical vapor deposition , 1992 .
[175] M. Salvadori,et al. DLC coating roughness as a function of film thickness , 2006 .
[176] F. Kennedy,et al. Tribological behavior of hard carbon coatings on steel substrates , 2003 .
[177] C. Charitidis,et al. Nanoindentation and nanoscratching studies of amorphous carbon films , 1999 .
[178] G. Friedbacher,et al. Roughness and deposition mechanism of DLC films prepared by r.f. plasma glow discharge , 1998 .
[179] C. Chan,et al. Mechanical and tribological properties of amorphous carbon films deposited on implanted steel substrates , 2004 .
[180] A. G. Evans,et al. The mechanical performance of DLC films on steel substrates , 1998 .
[181] Alexander M. Korsunsky,et al. On the hardness of coated systems , 1998 .
[182] Yeshayahu Lifshitz,et al. Hydrogen-free amorphous carbon films: correlation between growth conditions and properties , 1996 .
[183] I. Hutchings,et al. Sources of variability in the free-ball micro-scale abrasion test , 2005 .
[184] S. Hogmark,et al. DLC coating of boundary lubricated components—advantages of coating one of the contact surfaces rather than both or none , 2003 .
[185] G. G. Stokes. "J." , 1890, The New Yale Book of Quotations.
[186] D. Yoon,et al. Dependence of the bonding structure of DLC thin films on the deposition conditions of PECVD method , 2003 .
[187] G. Fenske,et al. Tribological Performance of Diamond and Diamondlike Carbon Films at Elevated Temperatures , 1995 .
[188] M. A. Tamor,et al. Atomic constraint in hydrogenated diamond-like carbon , 1991 .
[189] G. Radnóczi,et al. Carbon nitride films on orthopedic substrates , 2000 .
[190] M. Grasserbauer,et al. Thin film characterization of diamond-like carbon films prepared by r.f. plasma chemical vapor deposition , 1997 .
[191] C. V. Cooper,et al. Spectroscopic and selected mechanical properties of diamond-like carbon films synthesized by broad-beam ion deposition from methane , 1994 .
[192] Y. Lifshitz. Diamond-like carbon — present status , 1999 .
[193] O. Sbaizero,et al. Mechanical and chemical consequences of the residual stresses in plasma sprayed hydroxyapatite coatings. , 1997, Biomaterials.
[194] Da-yung Wang,et al. Microstructure and adhesion characteristics of diamond-like carbon films deposited on steel substrates , 2001 .
[195] Eitan Grossman,et al. Systematic variation of the Raman spectra of DLC films as a function of sp2:sp3 composition , 1996 .
[196] J. Vižintin,et al. Influence of substrate treatment on the tribological properties of DLC coatings , 2001 .
[197] A. Tagliaferro,et al. Improvement of mechanical properties of a-C:H by silicon addition , 1997 .
[198] V. Buršíková,et al. Temperature dependence of mechanical properties of DLC/Si protective coatings prepared by PECVD ☆ , 2002 .
[199] A. Grill,et al. Optical and tribological properties of heat-treated diamond-like carbon , 1990 .
[200] E. Martínez. Study of the mechanical properties of tetrahedral amorphous carbon films by nanoindentation and nanowear measurements , 2001 .
[201] P. Verdonck,et al. The influence of nitrogen on the dielectric constant and surface hardness in diamond-like carbon (DLC) films , 2004 .