论文信息 - FRM based FIR filter design - the WLS approach

FRM based FIR filter design - the WLS approach

Frequency-response masking (FRM) technique produces a filter network which comprises several sub-filters with very sparse coefficient values. If the sub-filters are optimized separately, the overall filter network will be suboptimal. In this paper, an unconstrained weighted least squares algorithm for simultaneously optimizing the sub-filters generated by the frequency-response masking technique is presented. Simulation runs show that our proposed technique produces significant reduction in the effective filter length.

Yong Ching Lim | Ya Jun Yu

[1] Young Hwan Lim. A digital filter bank for digital audio systems , 1986 .

[2] Yong Ching Lim,et al. A weighted least squares algorithm for quasi-equiripple FIR and IIR digital filter design , 1992, IEEE Trans. Signal Process..

[3] Yong Lian,et al. The optimum design of one- and two-dimensional FIR filters using the frequency response masking technique , 1993 .

[4] A. Ravindran,et al. Engineering Optimization: Methods and Applications , 2006 .

[5] Yong Ching Lim,et al. Frequency-response masking approach for the synthesis of sharp linear phase digital filters , 1986 .

[6] Sergio L. Netto,et al. Design of FIR filters combining the frequency-response masking and the WLS-Chebyshev approaches , 2001, ISCAS 2001. The 2001 IEEE International Symposium on Circuits and Systems (Cat. No.01CH37196).

[7] Yong Ching Lim,et al. Frequency-response masking approach for the synthesis of sharp two-dimensional diamond-shaped filters , 1998 .

[8] Tapio Saramäki,et al. Use of the Remez algorithm for designing FIR filters utilizing the frequency-response masking approach , 1999, ISCAS'99. Proceedings of the 1999 IEEE International Symposium on Circuits and Systems VLSI (Cat. No.99CH36349).

[9] Yong Lian,et al. Frequency-response masking approach for digital filter design: complexity reduction via masking filter factorization , 1994 .