Experimental investigation on the double-position impact responses and damage mechanism for Z-pinned composite laminates

[1]  A. Katunin,et al.  Damage progression in fibre reinforced polymer composites subjected to low-velocity repeated impact loading , 2020 .

[2]  Jinglei Yang,et al.  Low-velocity impact behaviors of a fully thermoplastic composite laminate fabricated with an innovative acrylic resin , 2020 .

[3]  D. Fang,et al.  Damage accumulation mechanism of composite laminates subjected to repeated low velocity impacts , 2020 .

[4]  D. Fang,et al.  An explicit–implicit combined model for predicting residual strength of composite cylinders subjected to low velocity impact , 2020 .

[5]  R. Tao,et al.  Effect of double impact positions on the low velocity impact behaviors and damage interference mechanism for composite laminates , 2020, Composites Part A: Applied Science and Manufacturing.

[6]  R. Talreja,et al.  Assessing the effects of ply constraints on local stress states in cross-ply laminates containing manufacturing induced defects , 2020 .

[7]  Jiayi Liu,et al.  Dynamic failure of ceramic particle reinforced foam-filled composite lattice core , 2020, Composites Science and Technology.

[8]  G. Scharr,et al.  Experimental investigations on the influence of notch definition on the pullout performance of circumferentially notched z-pins , 2020 .

[9]  Qi Zhang,et al.  3d printed continuous fiber reinforced composite auxetic honeycomb structures , 2020 .

[10]  J. Dear,et al.  Modelling damage in fibre-reinforced thermoplastic composite laminates subjected to three-point bend loading , 2020, Composite Structures.

[11]  R. Růžek,et al.  Concurrent use of Z-pins for crack arrest and structural health monitoring in adhesive-bonded composite lap joints , 2020 .

[12]  Chao Zhang,et al.  Predicting the tensile and compressive failure behavior of angle-ply spread tow woven composites , 2020 .

[13]  J. Kweon,et al.  Impact characteristics of composite panel stitched by I-fiber process , 2019 .

[14]  Halit Yazici,et al.  Hybrid fiber use on flexural behavior of ultra high performance fiber reinforced concrete beams , 2019 .

[15]  J. Xiong,et al.  Fabrication and mechanical behaviors of an all-composite sandwich structure with a hexagon honeycomb core based on the tailor-folding approach , 2019, Composites Science and Technology.

[16]  N. Petrinic,et al.  Coupon scale Z-pinned IM7/8552 delamination tests under dynamic loading , 2019, Composites Part A: Applied Science and Manufacturing.

[17]  Jiayi Liu,et al.  Mechanical response of a novel composite Y-frame core sandwich panel under shear loading , 2019, Composite Structures.

[18]  J. Dear,et al.  Experimental and numerical investigation of high velocity soft impact loading on aircraft materials , 2019, Aerospace Science and Technology.

[19]  J. Hoffmann,et al.  Mode I delamination fatigue resistance of unidirectional and quasi-isotropic composite laminates reinforced with rectangular z-pins , 2018, Composites Part A: Applied Science and Manufacturing.

[20]  F. Aymerich,et al.  Effect of Z-pinning on the impact resistance of composite laminates with different layups , 2018, Composites Part A: Applied Science and Manufacturing.

[21]  Lu Zhang,et al.  GF/epoxy laminates embedded with wire nets: A way to improve the low-velocity impact resistance and energy absorption ability , 2018, Composite Structures.

[22]  O. Ozdemir,et al.  Single and repeated impact behaviors of bio-sandwich structures consisting of thermoplastic face sheets and different balsa core thicknesses , 2018, Composites Part B: Engineering.

[23]  J. Hoffmann,et al.  Pullout performance of circumferentially notched z-pins in carbon fiber reinforced laminates , 2018, Composites Part A: Applied Science and Manufacturing.

[24]  F. Aymerich,et al.  Effect of stitching on the flexure after impact behavior of thin laminated composites , 2018 .

[25]  Yongkang Zhang,et al.  Numerical and experimental investigation on hail impact on composite panels , 2017 .

[26]  Bing Zhang,et al.  An Experimental Investigation into Multi-Functional Z-pinned Composite Laminates , 2016 .

[27]  Y. Wan,et al.  Tensile and compressive properties of chopped carbon fiber tapes reinforced thermoplastics with different fiber lengths and molding pressures , 2016 .

[28]  S. Hallett,et al.  Mode II delamination resistance of composites reinforced with inclined Z-pins , 2016 .

[29]  C. Santulli,et al.  Compression after impact strength of repaired GFRP composite laminates under repeated impact loading , 2015 .

[30]  Bing Zhang,et al.  Micro-mechanical finite element analysis of Z-pins under mixed-mode loading , 2015 .

[31]  A. Mouritz,et al.  Mode II interlaminar fatigue properties of z-pinned carbon fibre reinforced epoxy composites , 2014 .

[32]  S. Hallett,et al.  A novel model of delamination bridging via Z-pins in composite laminates , 2014 .

[33]  G. Scharr,et al.  Impact and post-impact properties of cfrp laminates reinforced with rectangular z-pins , 2013 .

[34]  Naoyuki Watanabe,et al.  X-ray radiography and micro-computed tomography examination of damage characteristics in stitched composites subjected to impact loading , 2011 .

[35]  M. Grassi,et al.  Improvement of low-velocity impact and compression-after-impact performance by z-fibre pinning , 2006 .

[36]  I. Partridge,et al.  Delamination of Z-pinned carbon fibre reinforced laminates , 2006 .

[37]  Bhavani V. Sankar,et al.  The effect of stitching on the low-velocity impact response of delaminated composite beams , 2000 .

[38]  Kunigal N. Shivakumar,et al.  Prediction of Impact Force and Duration Due to Low-Velocity Impact on Circular Composite Laminates , 1985 .

[39]  L. Sun,et al.  Repeated low-velocity impact response and damage mechanism of glass fiber aluminium laminates , 2019, Aerospace Science and Technology.

[40]  A. Mouritz,et al.  Re-evaluation of mode I bridging traction modelling for z-pinned laminates based on experimental analysis , 2014 .