Abstract The course of loss of flow accident and flow inversion in a pool type research reactor, with scram enabled under natural circulation condition is numerically investigated. The analyses were performed by a lumped parameters approach for the coupled kinetic–thermal-hydraulics, with continuous feedback due to coolant and fuel temperature effects. A modified Runge–Kutta method was adopted for a better solution to the set of stiff differential equations. Transient thermal-hydraulics during the process of flow inversion and establishment of natural circulation were considered for a 10-MW IAEA research reactor. Some important parameters such as the peak temperatures for the hot channel were obtained for both high-enriched and low enriched fuel. The model prediction is also verified through comparison with other computer code results reported in the literature for detailed simulations of loss of flow accidents (LOFA) and the agreement between the results for the peak clad temperatures and key parameters has been satisfactory. It was found that the flow inversion and subsequent establishment of natural circulation keep the peak cladding surface temperature below the saturation temperature to avoid the escalation of clad temperature to the level of onset of nucleate boiling and sub-cooled void formation to ensure the safe operation of the reactor.
[1]
J. Thome,et al.
Convective Boiling and Condensation
,
1972
.
[2]
Anis Bousbia-Salah,et al.
Dynamic calculations of the IAEA safety MTR research reactor Benchmark problem using RELAP5/3.2 code
,
2004
.
[3]
L. S. Tong,et al.
Thermal analysis of pressurized water reactors
,
1979
.
[4]
H. Kazeminejad.
Reactivity insertion limits in a typical pool-type research reactor cooled by natural circulation
,
2006
.
[5]
E. E. Feldman,et al.
Recent improvements to steady-state thermal-hydraulic analysis of research reactors in the RERTR Program at ANL.
,
2006
.
[6]
A. F. Henry,et al.
Nuclear Reactor Analysis
,
1975,
IEEE Transactions on Nuclear Science.
[7]
J. Sánchez.
On the numerical solution of the point reactor kinetics equations by generalized Runge-Kutta methods
,
1989
.
[8]
W. L. Woodruff,et al.
A Kinetics and Thermal-Hydraulics Capability for the Analysis of Research Reactors
,
1984
.
[9]
C. Housiadas,et al.
Lumped parameters analysis of coupled kinetics and thermal-hydraulics for small reactors
,
2002
.