论文信息 - 25Gb/s PAM4 adaptive receiver equalisation requirements for burst-mode transmission systems

25Gb/s PAM4 adaptive receiver equalisation requirements for burst-mode transmission systems

Requirements for burst-mode equalisation in a 25Gb/s PAM4 system for passive optical network upstream traffic are analysed for different linear equaliser solutions, with transmission over 40km of fibre. The impact of chromatic dispersion, transmitter bandwidth restriction and non-linearities

Paul D. Townsend | Cleitus Antony | Giuseppe Talli | Marco Dalla Santa

[1] Vincent Houtsma,et al. Demonstration of symmetrical 25 Gbps TDM-PON with 31.5 dB optical power budget using only 10 Gbps optical components , 2015, 2015 European Conference on Optical Communication (ECOC).

[2] Klaus Grobe,et al. Physical layer aspects of NG-PON2 standards–Part 2: System design and technology feasibility [Invited] , 2016, IEEE/OSA Journal of Optical Communications and Networking.

[3] Peter Ossieur,et al. Demonstration of 10 Gbit/s burst-mode transmission using a linear burst-mode receiver and burst-mode electronic equalization [invited] , 2015, IEEE/OSA Journal of Optical Communications and Networking.

[4] H. Griesser,et al. 40 Gb/s lane rate NG-PON using electrical/optical duobinary, PAM-4 and low complex equalizations , 2016, 2016 Optical Fiber Communications Conference and Exhibition (OFC).

[5] Vincent Houtsma,et al. Investigation of symmetrical optical amplified 40 Gbps PAM-4/duobinary TDM-PON using 10G optics and DSP , 2016, 2016 Optical Fiber Communications Conference and Exhibition (OFC).

[6] Klaus Grobe,et al. First demonstration of real-time end-to-end 40 Gb/s PAM-4 system using 10-G transmitter for next generation access applications , 2015, 2015 European Conference on Optical Communication (ECOC).