论文信息 - Self-Repairing and Adaptive Tracking for MIMO Systems with Sensor Failures

Self-Repairing and Adaptive Tracking for MIMO Systems with Sensor Failures

Abstract This paper presents a new self-repairing control system (SRCS) for unknown stable multiple-input-multiple-output (MIMO) plants with sensor failures. The proposed method can automatically switch from the faulty sensors to the healthy ones if the sensor failures occur. Only the artificial test signals and the integrators are utilized to detect the sensor failures. Hence, the SRCS requires no mathematical model of the plant. Furthermore, the adaptive λ -tracker is introduced not only to cope with uncertainties in parameters but also to eliminate the bias effects of the injected test signals.

Masanori Takahashi

[1] Rolf Isermann,et al. Supervision, fault-detection and fault-diagnosis methods — An introduction , 1997 .

[2] Hong Wang,et al. On the use of adaptive updating rules for actuator and sensor fault diagnosis , 1997, Autom..

[3] Eugene P. Ryan,et al. Universal λ-tracking for nonlinearly-perturbed systems in the presence of noise , 1994, Autom..

[4] M. Takahashi. A self-repairing control system for plants with faulty actuators , 2003, 42nd IEEE International Conference on Decision and Control (IEEE Cat. No.03CH37475).

[5] Howard Kaufman,et al. Direct Adaptive Control Algorithms , 1998 .

[6] Daniel E. Miller,et al. An adaptive controller which provides an arbitrarily good transient and steady-state response , 1991 .

[7] Rolf Isermann,et al. Fault-tolerant drive-by-wire systems , 2002 .

[8] Paul M. Frank,et al. Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy: A survey and some new results , 1990, Autom..