Aluminium corrosion in power semiconductor devices

[1]  Reliability of Organic Compounds in Microelectronics and Optoelectronics , 2022 .

[2]  C. Zorn,et al.  Improved HV-H3TRB robustness of a 1700 V IGBT chip set in standard power modules , 2021, Microelectronics Reliability.

[3]  M. Paulasto-Kröckel,et al.  A humidity-induced novel failure mechanism in power semiconductor diodes , 2021, Microelectronics Reliability.

[4]  T. Wassermann,et al.  A new high-voltage H2S single noxious gas reliability test for power modules , 2019, Microelectronics Reliability.

[5]  J. Wang,et al.  Preserving Evidence for Root Cause Investigations with Halogen-Free Microwave Induced Plasma , 2018, ISTFA 2018: Conference Proceedings from the 44th International Symposium for Testing and Failure Analysis.

[6]  Munaf Rahimo,et al.  The influence of humidity on the high voltage blocking reliability of power IGBT modules and means of protection , 2018, Microelectron. Reliab..

[7]  O. Schilling,et al.  Humidity robustness for high voltage power modules: Limiting mechanisms and improvement of lifetime , 2018, Microelectron. Reliab..

[8]  C. Liu,et al.  Unique failure analysis capabilities enabled by the MIP decapsulation technique , 2017, 2017 IEEE 24th International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA).

[9]  X. Zhong,et al.  Electrochemical migration of Sn and Sn solder alloys: a review , 2017 .

[10]  Jiaqi Tang.  CF4-free Microwave Induced Plasma Decapsulation of Automotive Semiconductor Devices , 2016 .

[11]  Nando Kaminski,et al.  Temperature–humidity–bias testing on insulated-gate bipolartransistor modules – failure modes and acceleration due to high voltage , 2015 .

[12]  Nando Kaminski,et al.  Acceleration of temperature humidity bias (THB) testing on IGBT modules by high bias levels , 2015, 2015 IEEE 27th International Symposium on Power Semiconductor Devices & IC's (ISPSD).

[13]  F. Patrick McCluskey,et al.  Physics-of-failure assessment methodology for power electronic systems , 2014, Microelectron. Reliab..

[14]  Frede Blaabjerg,et al.  Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[15]  Rajan Ambat,et al.  Electrochemical migration of tin in electronics and microstructure of the dendrites , 2011 .

[16]  Petr Vanýsek,et al.  ELECTROCHEMICAL SERIES , 2010 .

[17]  J. Otaigbe,et al.  The effects of Phyllanthus amarus extract on corrosion and kinetics of corrosion process of aluminum in alkaline solution , 2009 .

[18]  M. Stecher,et al.  On the Way to Zero Defect of Plastic-Encapsulated Electronic Power Devices—Part I: Metallization , 2009, IEEE Transactions on Device and Materials Reliability.

[19]  M. Stecher,et al.  On the Way to Zero Defect of Plastic-Encapsulated Electronic Power Devices—Part II: Molding Compound , 2009, IEEE Transactions on Device and Materials Reliability.

[20]  M. Stecher,et al.  On the Way to Zero Defect of Plastic-Encapsulated Electronic Power Devices—Part III: Chip Coating, Passivation, and Design , 2009, IEEE Transactions on Device and Materials Reliability.

[21]  A. Preussger,et al.  Reliability qualification of semiconductor devices based on physics‐of‐failure and risk and opportunity assessment , 2002 .

[22]  R. Ross,et al.  Graphical methods for plotting and evaluating Weibull distributed data , 1994, Proceedings of 1994 4th International Conference on Properties and Applications of Dielectric Materials (ICPADM).

[23]  J. Hem,et al.  Form and stability of aluminum hydroxide complexes in dilute solution , 1967 .

[24]  M. S. Hunter,et al.  Natural and Thermally Formed Oxide Films on Aluminum , 1956 .