Model predictive control based active chatter control in milling process

[1]  Hongrui Cao,et al.  Robust active control based milling chatter suppression with perturbation model via piezoelectric stack actuators , 2019, Mechanical Systems and Signal Processing.

[2]  Hongrui Cao,et al.  A chatter mitigation technique in milling based on H∞-ADDPMS and piezoelectric stack actuators , 2018, The International Journal of Advanced Manufacturing Technology.

[3]  Hongrui Cao,et al.  Zoom synchrosqueezing transform-based chatter identification in the milling process , 2018, The International Journal of Advanced Manufacturing Technology.

[4]  Tao Huang,et al.  Robust Chatter Mitigation Control for Low Radial Immersion Machining Processes , 2018, IEEE Transactions on Automation Science and Engineering.

[5]  Steffen Ihlenfeldt,et al.  Chatter prediction for uncertain parameters , 2018, Advances in Manufacturing.

[6]  Hongrui Cao,et al.  Stiffness variation method for milling chatter suppression via piezoelectric stack actuators , 2018 .

[7]  Gábor Stépán,et al.  Prediction of robust stability boundaries for milling operations with extended multi-frequency solution and structured singular values , 2017 .

[8]  Gianni Campatelli,et al.  Mitigation of chatter instabilities in milling using an active fixture with a novel control strategy , 2017 .

[9]  Hongrui Cao,et al.  Chatter detection in milling process based on synchrosqueezing transform of sound signals , 2017 .

[10]  N. van de Wouw,et al.  Experimental Validation of Robust Chatter Control for High-Speed Milling Processes , 2017 .

[11]  Xuefeng Chen,et al.  The concept and progress of intelligent spindles: A review , 2017 .

[12]  Gabor Stepan,et al.  Robust stability analysis of machining operations , 2017 .

[13]  Gianni Campatelli,et al.  Investigating Actuation Strategies in Active Fixtures for Chatter Suppression , 2016 .

[14]  Robin Kleinwort,et al.  Comparison of Different Control Strategies for Active Damping of Heavy Duty Milling Operations , 2016 .

[15]  Han Ding,et al.  Active Control of an Active Magnetic Bearings Supported Spindle for Chatter Suppression in Milling Process , 2015 .

[16]  Hongrui Cao,et al.  Chatter identification in end milling process based on EEMD and nonlinear dimensionless indicators , 2015 .

[17]  Yue Wu,et al.  Model predictive control to mitigate chatters in milling processes with input constraints , 2015 .

[18]  Henk Nijmeijer,et al.  Pyragas-type feedback control for chatter mitigation in high-speed milling , 2015 .

[19]  Yusuf Altintas,et al.  A novel magnetic actuator design for active damping of machining tools , 2014 .

[20]  Ryozo Nagamune,et al.  Robust prediction of chatter stability in micro milling comparing edge theorem and LMI , 2014 .

[21]  Yusuf Altintas,et al.  Magnetic actuator for active damping of boring bars , 2014 .

[22]  Yaguo Lei,et al.  Chatter identification in end milling process using wavelet packets and Hilbert–Huang transform , 2013 .

[23]  Berend Denkena,et al.  Process stabilization with an adaptronic spindle system , 2012, Prod. Eng..

[24]  Nathan van de Wouw,et al.  Robust Active Chatter Control in the High-Speed Milling Process , 2012, IEEE Transactions on Control Systems Technology.

[25]  Berend Denkena,et al.  Stable islands in the stability chart of milling processes due to unequal tooth pitch , 2011 .

[26]  Neil D. Sims,et al.  Optimisation of variable helix tool geometry for regenerative chatter mitigation , 2011 .

[27]  H Nijmeijer,et al.  Chatter control in the high-speed milling process using μ-synthesis , 2010, Proceedings of the 2010 American Control Conference.

[28]  Zoltan Dombovari,et al.  The effect of serration on mechanics and stability of milling cutters , 2010 .

[29]  Neil D. Sims,et al.  Analytical prediction of chatter stability for variable pitch and variable helix milling tools , 2008 .

[30]  Jokin Munoa,et al.  Stability of milling processes with continuous spindle speed variation: Analysis in the frequency and time domains, and experimental correlation , 2008 .

[31]  Natarajan Shankar,et al.  Mitigation of chatter instabilities in milling by active structural control , 2001 .

[32]  Yusuf Altintas,et al.  Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design , 2000 .