Microstructure and high temperature tribological behaviour of self-lubricating Ti-TiBx composite doped with Ni-Bi

[1]  Qi Chen,et al.  Nano Bi Chemical Modification and Tribological Properties of Bi/SiO2 Composite as Lubricating Oil Additives , 2022, Tribology Letters.

[2]  Ihsan A. Baqer,et al.  Effect of Bi2O3 Nanoparticles Addition to Lubricating Oil on the Dynamic Behavior of Rotor-Bearing Systems , 2022, Journal of Vibration Engineering & Technologies.

[3]  M. Antonov,et al.  Solid Lubrication at High-Temperatures—A Review , 2022, Materials.

[4]  M. Antonov,et al.  High-Temperature Wear Performance of hBN-Added Ni-W Composites Produced from Combustion-Synthesized Powders , 2022, Materials.

[5]  Qi Chen,et al.  Tailoring Cu nano Bi self-lubricating alloy material by shift-speed ball milling flake powder metallurgy , 2022, Journal of Alloys and Compounds.

[6]  Dong Sun,et al.  Tribological characteristics of the dual titanium boride layers (TiB2+TiB) on titanium alloy , 2021 .

[7]  M. Antonov,et al.  Hot Sliding Wear of 88 wt.% TiB–Ti Composite from SHS Produced Powders , 2021, Materials.

[8]  M. Antonov,et al.  Sliding wear performance of in-situ spark plasma sintered Ti-TiBw composite at temperatures up to 900 °C , 2021, Wear.

[9]  A. K. Tieu,et al.  Effect of adding soft Bi2O3 on structural modification and tribological regulation of Ni-5 wt% Al composite coating in wide temperatures range , 2020 .

[10]  A. Roy Choudhury,et al.  Hardness and wear behaviour of multiple component coating on Ti-6Al-4V substrate by laser application , 2020 .

[11]  H. Torres,et al.  Tribological behaviour of MoS2-based self-lubricating laser cladding for use in high temperature applications , 2018, Tribology International.

[12]  Cheng Lu,et al.  Mechanical and tribological properties of plasma sprayed NiAl composite coatings with addition of nanostructured TiO2/Bi2O3 , 2018, Surface and Coatings Technology.

[13]  H. Torres,et al.  Self-lubricating laser claddings for reducing friction and wear from room temperature to 600 °C , 2018, Wear.

[14]  H. Torres,et al.  Tribological behaviour of self-lubricating materials at high temperatures , 2018 .

[15]  H. Torres,et al.  Microstructural design of self-lubricating laser claddings for use in high temperature sliding applications , 2018 .

[16]  L. Kollo,et al.  Friction studies of metal surfaces with various 3D printed patterns tested in dry sliding conditions , 2018 .

[17]  A. Lehtovaara,et al.  Load capacity of lubricated bismuth bronze bimetal bearing under elliptical sliding motion , 2017 .

[18]  D. Schipper,et al.  Tribochemistry of Bismuth and Bismuth Salts for Solid Lubrication. , 2016, ACS applied materials & interfaces.

[19]  S. Muhl,et al.  Reduction of the coefficient of friction of niobium nitride coatings by the addition of bismuth , 2016 .

[20]  Thomas W. Scharf,et al.  In situ nitrided titanium alloys: Microstructural evolution during solidification and wear , 2015 .

[21]  Jun Li,et al.  Effect of Y2O3 on the sliding wear resistance of TiB/TiC-reinforced composite coatings fabricated by laser cladding , 2014 .

[22]  S. Maruyama,et al.  Phase Diagram Investigations of the Bi-Ti System , 2013 .

[23]  L. Geng,et al.  Dry sliding wear behavior of titanium matrix composites hybrid-reinforced by in situ TiBw and TiCp , 2012 .

[24]  A.-F. Kanta,et al.  Mechanical and wear characterization of electroless nickel-boron coatings , 2011 .

[25]  J Dutta Majumdar,et al.  Laser material processing , 2011 .

[26]  B. Tang,et al.  Microstructure and tribological behaviors of Ti6Al4V alloy treated by plasma Ni alloying , 2011 .

[27]  K. Raeissi,et al.  Characterization and corrosion behavior of NiTi–Ti2Ni–Ni3Ti multiphase intermetallics produced by vacuum sintering , 2011 .

[28]  Zhanpeng Jin,et al.  Thermodynamic optimization of Bi-Ni binary system , 2011 .

[29]  Jiansong Zhou,et al.  Microstructure and tribological properties of in situ synthesized TiC, TiN, and SiC reinforced Ti3Al intermetallic matrix composite coatings on pure Ti by laser cladding , 2008 .

[30]  Hua-ming Wang,et al.  Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy , 2008 .

[31]  G. Vassilev.  Contribution to the Ti‐Bi phase diagram , 2006 .

[32]  J. Hosson,et al.  Sliding wear resistance of metal matrix composite layers prepared by high power laser , 2005 .

[33]  S. Zhang,et al.  In-situ synthesis and wear performance of TiC particle reinforced composite coating on alloy Ti6Al4V , 2001 .

[34]  Ruedi Rytz,et al.  Chemical Bonding in the Ternary Transition Metal Bismuthides Ti4TBi2 with T = Cr, Mn, Fe, Co, and Ni , 1999 .

[35]  C. Kao,et al.  Formation and Absence of Intermetallic Compounds during Solid-State Reactions in the Ni−Bi System , 1999 .