Adaptive Design and Performance Evaluation of Compact Acoustic Enclosures Built with GFRP for Portable Mini-generators

A simple, portable and effective design for enclosing portable generators to reduce the radiated noise has remained a daunting challenge to noise control advocates in many developing countries. This research aims to use an adaptive design approach to create an enclosure for minimizing portable mini-generator noise. The noise characteristics of the mini-generators was ascertained and construction of a 730 by 640 by 600 mm enclosure was accomplished by using glass fiber reinforced plastic (GFRP) to build a double walled enclosure surfacing and rock wool as the sandwiched absorbing material. The sound pressure level (SPL) around the generator before and after the application of the enclosure was measured and evaluated. The results obtained showed that the acoustic enclosure could achieve an insertion loss of up to 16 dB (A) at a distance of 1.0 m. Also, the heat transfer characteristic of the enclosure design was put into consideration as well as the requirements of the engine air aspiration and cooling inside of the enclosure. Incorporation of fans in the acoustic enclosure design increased convectional fresh air circulation into, and discharge of the heat generated in, the enclosure, thus maintaining a safe temperature of about 40 o C inside of the acoustic enclosure at the generator operating maximum load. Original Research Article Agbo; JERR, 7(3): 1-11, 2019; Article no.JERR.51956 2

[1]  Martin J. Bunch,et al.  STUDIES ON CONTROL OF NOISE FROM PORTABLE POWER GENERATOR , 2004 .

[2]  Timothy G Hawkins,et al.  STUDIES AND RESEARCH REGARDING SOUND REDUCTION MATERIALS WITH THE PURPOSE OF REDUCING SOUND POLLUTION , 2014 .

[3]  Jerzy Józwik.  IDENTIFICATION AND MONITORING OF NOISE SOURCES OF CNC MACHINE TOOLS BY ACOUSTIC HOLOGRAPHY METHODS , 2016 .

[4]  Grigorios L. Kyriakopoulos,et al.  Review of Noise Suppression in Package Generators , 2014 .

[6]  Sébastien Paillasseur,et al.  Measurement of component's sound power emission on a PSA's diesel engine by means of 3D acoustic imaging techniques, and its applications , 2015 .

[7]  Musa Nicholas Akhaze,et al.  Development of a Soundproof Device for 950 Watt rated Portable Generators , 2016 .

[8]  D. J. Oldham,et al.  The acoustical performance of small close fitting enclosures, part 2: Experimental investigation , 1991 .

[9]  Victor V. Krylov,et al.  Vibration of a rectangular plate with a central power-law profiled groove by the Rayleigh–Ritz method , 2016 .

[10]  Dah-You Maa,et al.  Microperforated-panel wideband absorbers , 1987 .

[11]  V. Krylov,et al.  Experimental investigation of damping flexural vibrations in glass fibre composite plates containing one- and two-dimensional acoustic black holes , 2014 .

[12]  B. C. Nakra,et al.  Noise control of engine driven portable generator set , 1998 .

[13]  Nurudeen A. Raji,et al.  Development and Performance Evaluation of Sound proof Enclosure for Portable Generators , 2012 .

[14]  Lawrence E. Kinsler,et al.  Fundamentals of acoustics , 1950 .

[15]  Charles Mbohwa,et al.  Design of an Optimum Acoustic Enclosure for an Open Frame Diesel Generator , 2017 .

[16]  M. Abd,et al.  ACOUSTICAL TREATMENT OF EMERGENCY POWER GENERATOR , 2007 .

[17]  Pedro Cobo,et al.  Optimisation of an active control system to reduce the exhaust noise radiated by a small generator , 2001 .

[18]  C. R. Krishna.  SURVEY OF NOISE SUPPRESSION SYSTEMS FOR ENGINE GENERATOR SETS. , 1999 .