Machine tools for large parts
暂无分享,去创建一个
Aitor Olarra | Dragos Axinte | L. Uriarte | Steffen Ihlenfeldt | J. Eguia | José A. Yagüe-Fabra | Mikel Zatarain | D. Axinte | J. Yagüe-Fabra | M. Zatarain | S. Ihlenfeldt | L. Uriarte | A. Olarra | J. Eguía
[1] Masaomi Tsutsumi,et al. Identification and compensation of systematic deviations particular to 5-axis machining centers , 2003 .
[3] Shin'ichi Warisawa,et al. Development of an Intelligent High-Speed Machining Center , 2001 .
[4] Hoda A. ElMaraghy,et al. Flexible and reconfigurable manufacturing systems paradigms , 2005 .
[5] J. A. Yagüe,et al. Self-centering probes with parallel kinematics to verify machine-tools , 2006 .
[6] Jong-Leng Liow,et al. Mechanical micromachining: a sustainable micro-device manufacturing approach? , 2009 .
[7] Heui Jae Pahk,et al. A new technique for volumetric error assessment of CNC machine tools incorporating ball bar measurement and 3D volumetric error model , 1997 .
[8] M. Kannan,et al. A feature-based generic setup planning for configuration synthesis of reconfigurable machine tools , 2009 .
[9] Hans-Christian Möhring,et al. Process monitoring with sensory machine tool components , 2010 .
[10] Jorge Santolaria,et al. Kinematic parameter estimation technique for calibration and repeatability improvement of articulated arm coordinate measuring machines , 2008 .
[11] Robert Schmitt,et al. On-the-fly calibration of linear and rotary axes of machine tools and CMMs using a tracking interferometer , 2009 .
[12] Paweł Majda. Modeling of geometric errors of linear guideway and their influence on joint kinematic error in machine tools , 2012 .
[13] Z. Sienkiewicz,et al. Shape optimization of a dynamically loaded machine foundation coupled to a semi-infinite inelastic medium , 1996 .
[14] Wu-Sung Yao,et al. Modeling and synchronous control of a single-axis stage driven by dual mechanically-coupled parallel ball screws , 2007 .
[15] Mikel Zatarain,et al. New Control Techniques Based on State Space Observers for Improving the Precision and Dynamic Behaviour of Machine Tools , 2005 .
[16] Jian Wang,et al. On the accuracy of a Stewart platform. II. Kinematic calibration and compensation , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.
[17] Yusuf Altintas,et al. High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation , 2001 .
[18] S. Sartori,et al. Geometric Error Measurement and Compensation of Machines , 1995 .
[19] Hoda A. ElMaraghy,et al. Optimal configuration selection for Reconfigurable Manufacturing Systems , 2007 .
[20] Hans Gross,et al. Electrical Feed Drives in Automation: Basics, Computation, Dimensioning , 2001 .
[21] Y. Lin,et al. Modelling of Five-Axis Machine Tool Metrology Models Using the Matrix Summation Approach , 2003 .
[22] Jorge Santolaria,et al. Towards an effective identification strategy in volumetric error compensation of machine tools , 2012 .
[23] I. Garitaonandia,et al. An active system of reduction of vibrations in a centerless grinding machine using piezoelectric actuators , 2007 .
[24] Hideo Kato,et al. Installation of cylindrical grinding machine by means of load-sensible mounting elements ― relationship between mounting load and dynamic stiffness , 1991 .
[25] Dragos Axinte,et al. A review of recent developments in the design of special-purpose machine tools with a view to identification of solutions for portable in situ machining systems , 2010 .
[26] Manfred Weck,et al. Parallel Kinematic Machine Tools – Current State and Future Potentials , 2002 .
[27] Alan Myers,et al. Finite element analysis of the static stiffnessof a foundation for large machine tool , 2005 .
[28] A.C.H. van der Wolf,et al. A General Method for Error Description of CMMs Using Polynomial Fitting Procedures , 1989 .
[29] Diego Rovere,et al. Compensating high precision positioning machine tools by a self learning capable controller , 2011 .
[30] Yasuhiro Kakinuma,et al. Development of Fixture Devices for Thin and Compliant Workpieces , 2005 .
[31] H. Van Brussel,et al. Robust Control of Feed Drives with Linear Motors , 1998 .
[32] Eiji Shamoto,et al. Analysis and Improvement of Motion Accuracy of Hydrostatic Feed Table , 2001 .
[33] Jorge Santolaria,et al. Identification strategy of error parameter in volumetric error compensation of machine tool based on laser tracker measurements , 2012 .
[34] Weidong Zhu,et al. Machine tool component error extraction and error compensation by incorporating statistical analysis , 2010 .
[35] Jorge Pomares,et al. Survey of Visual and Force/Tactile Control of Robots for Physical Interaction in Spain , 2009, Sensors.
[36] Tamás Insperger,et al. Analysis of directional factors in milling: importance of multi-frequency calculation and of the inclusion of the effect of the helix angle , 2010 .
[37] J.R.R. Mayer,et al. Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact , 2012 .
[38] Christian Brecher,et al. Measurement of structure dynamics using a tracking-interferometer , 2012, Prod. Eng..
[39] Christian Brecher,et al. Design of a Highly Dynamic Hydraulic Actuator?for Active Damping Systems in Machine Tools , 2012, Int. J. Intell. Mechatronics Robotics.
[40] G. N. Peggs,et al. Design of a High-Accuracy CMM Based on Multi-Lateration Techniques , 2000 .
[41] Mikel Zatarain,et al. Raw part characterisation and automated alignment by means of a photogrammetric approach , 2012 .
[42] Jan Swevers,et al. Gain-scheduling control of machine tools with varying structural flexibility , 2004 .
[43] Deug-Woo Lee,et al. Compensation for five DOF motion errors of hydrostatic feed table by utilizing actively controlled capillaries , 2006 .
[44] Dragos Axinte,et al. An analysis of the functional capability of an in-house developed miniature 4-axis machine tool , 2010 .
[45] A. Slocum,et al. Precision Machine Design , 1992 .
[46] Yusuf Altintas,et al. Optimization of multiple tuned mass dampers to suppress machine tool chatter , 2010 .
[47] Yao Gang Li,et al. Modeling Research for Active Control of Coupled Vibration between Multiple CNC Milling Machines and Flexible Foundation , 2011 .
[48] Jorge Santolaria,et al. An Overview of Kinematic and Calibration Models Using Internal/External Sensors or Constraints to Improve the Behavior of Spatial Parallel Mechanisms , 2010, Sensors.
[49] Yasunori Sakai,et al. Quantitative Evaluation Method for Damping Capacity of Linear Rolling Bearings for Feed Drive Mechanisms , 2012 .
[50] Stuart T. Smith,et al. Improving the accuracy of large scale monolithic parts using fiducials , 2005 .
[51] Yusuf Altintas,et al. Feedrate Optimization for Spline Interpolation In High Speed Machine Tools , 2003 .
[52] Masanori Ohori,et al. Application of a New Straightness Measurement Method to Large Machine Tool , 1981 .
[53] André Voet,et al. Optical measurement techniques for mobile and large scale dimensional metrology , 2007 .
[54] M. Zatarain,et al. Improvement of the Performance in Machine Tools by Means of State Space Control Strategies , 2005, Proceedings of the 44th IEEE Conference on Decision and Control.
[55] Aitor Olarra,et al. New Developments in Drives and Tables , 2009 .
[56] Kwon Hee Kim,et al. A fluid film model for finite element analysis of structures with linear hydrostatic bearings , 2004 .
[57] Eugen Reichel,et al. 1. A - C , 1909 .
[58] H. Schwenke,et al. Error mapping of CMMs and machine tools by a single tracking interferometer , 2005 .
[59] H. Kunzmann,et al. A Uniform Concept for Calibration, Acceptance Test, and Periodic Inspection of Coordinate Measuring Machines Using Reference Objects , 1990 .
[60] P. Koblischek. Polymer Concrete as an Alternative Material for Grey Cast Iron and Welded Steel Construction in the Machine Tool Industry , 1991 .
[61] F. Jovane,et al. Reconfigurable Manufacturing Systems , 1999 .
[62] J. Denavit,et al. A kinematic notation for lower pair mechanisms based on matrices , 1955 .
[63] T. Moriwaki,et al. Multi-functional machine tool , 2008 .
[64] J. Jedrzejewski,et al. Holistic Precision Error Model for 5 Axis HSC Machining Centre with Rotating Rolling Units In Direct Drives , 2012 .
[65] J.R.R. Mayer,et al. Assessment of machine tool trunnion axis motion error, using magnetic double ball bar , 2006 .
[66] Michael F. Za¨h,et al. Modular Add-On System for Vibration Control in Gantry Milling Machines , 2005 .
[67] E. Saljé,et al. Comparison of Machine Tool Elements Made of Polymer Concrete and Cast Iron , 1988 .
[68] Christian Brecher,et al. Structure integrated adaptronical systems for machine tools , 2008, Prod. Eng..
[69] Dong Gao,et al. Temperature Variables Selection for Thermal Error Modeling of Heavy-Duty CNC Milling-Boring Machine Tools , 2011 .
[70] Neil A. Duffie,et al. Generation of Parametric Kinematic Error-Correction Functions from Volumetric Error Measurements , 1985 .
[71] Christian Brecher,et al. Active compensation for portal machines , 2010, Prod. Eng..
[72] J. J. Aguilar,et al. Development and calibration of self-centring probes for assessing geometrical errors of machines , 2009 .
[73] Alan Myers,et al. Measurement techniques for determining the static stiffness of foundations for machine tools. , 2005 .
[74] John C. Ziegert,et al. Fundamental Comparison of the Use of Serial and Parallel Kinematics for Machines Tools , 1999 .
[75] Enrico Canuto,et al. Coordinate Measuring Machines and Machine Tools Selfcalibration and Error Correction , 1987 .
[76] Berend Denkena,et al. Workpiece and Tool Handling in Metal Cutting Machines , 2006 .
[77] Robert Schmitt,et al. Geometric error measurement and compensation of machines : an update , 2008 .
[78] Shigeru Aoki,et al. REDUCTION METHOD FOR RESIDUAL STRESS OF WELDED JOINT USING HARMONIC VIBRATIONAL LOAD , 2007 .
[79] Christian Brecher,et al. Machine tool feed drives , 2011 .
[80] Christian Brecher,et al. Thermal issues in machine tools , 2012 .
[81] Jorge Santolaria,et al. Spatial resolution-based kinematic design of a parallel positioning platform , 2011 .
[82] Bin Yao,et al. Experimental investigation on high-performance coordinated motion control of high-speed biaxial systems for contouring tasks , 2011 .
[83] Tian Huang,et al. Design of a 4-DOF hybrid PKM module for large structural component assembly , 2010 .
[84] K. Terzaghi,et al. Soil mechanics in engineering practice , 1948 .
[85] Haitao Liu,et al. Design of a 3-DOF PKM module for large structural component machining , 2010 .
[86] Jui-Pin Hung,et al. Load effect on the vibration characteristics of a stage with rolling guides , 2009 .
[87] W. M. Lin,et al. Tracking control for a synchronized dual parallel linear motor machine tool , 2008 .
[88] S. Hinduja,et al. Shape optimization of a foundation for a large machine tool , 1986 .
[89] M. A. Mannan,et al. A Force-Controlled Clamping Element for intelligent Fixturing , 1997 .
[90] Julien Beaudry,et al. Discrete-Time State Feedback With Velocity Estimation Using a Dual Observer: Application to an Underwater Direct-Drive Grinding Robot , 2012, IEEE/ASME Transactions on Mechatronics.
[91] Dragos Axinte,et al. Theoretical analysis of a special purpose miniature machine tool with parallel kinematics architecture: free-leg hexapod , 2012 .
[92] Yusuf Altintas,et al. Sliding Mode Controller Design for High Speed Feed Drives , 2000 .
[93] Günter Pritschow,et al. Ferraris Sensor – The Key for advanced dynamic Drives , 2003 .
[94] Christian Brecher,et al. Ressourceneffizienzbewertung einer Werkzeugmaschine zur Steigerung ihrer Wirtschaftlichkeit , 2009 .
[95] B. Wilczyński,et al. Minimum-Weight Design of Machine Foundation Under Vertical Load , 1993 .
[96] Christian Brecher,et al. Compensation of Thermo-elastic Machine Tool Deformation Based on Control internal Data , 2004 .
[97] Juergen Hesselbach,et al. Development of an active clamping system for noise and vibration reduction , 2010 .
[98] M. A. Donmez,et al. A general methodology for machine tool accuracy enhancement by error compensation , 1986 .
[99] R. Oboe,et al. A new direct deformation sensor for active compensation of positioning errors in large milling machines , 2006, 9th IEEE International Workshop on Advanced Motion Control, 2006..
[100] Shigeki Okuyama,et al. Numerical Study on Constant-Flow Hydrostatic Water Bearing for a Machine-Tool Table , 2011 .
[101] Lei Zhang,et al. Development of Measurement System on Straightness Error for Guide of Large CNC Machine Tool , 2011 .
[102] Neil D. Sims,et al. Vibration absorbers for chatter suppression: A new analytical tuning methodology , 2007 .
[103] Ralph C. Veale,et al. Error Compensation of Coordinate Measuring Machines , 1985 .
[104] Frank Härtig,et al. Precision engineering for wind energy systems , 2012 .
[105] J. B. Bryan,et al. Design and construction of an ultraprecision 84 inch diamond turning machine , 1979 .
[106] Christian Brecher,et al. Chatter suppression with an active workpiece holder , 2010, Prod. Eng..
[107] John M. Hollerbach,et al. The Calibration Index and Taxonomy for Robot Kinematic Calibration Methods , 1996, Int. J. Robotics Res..
[108] Eckart Uhlmann,et al. Design- and control-concept for compliant machine tools based on controller integrated models , 2012 .
[109] Dragos Axinte,et al. Free-leg Hexapod: A novel approach of using parallel kinematic platforms for developing miniature machine tools for special purpose operations , 2011 .
[110] Jean-Pierre Merlet,et al. Parallel Robots , 2000 .
[111] Welf-Guntram Drossel,et al. Design method for machine tools with bionic inspired kinematics , 2009 .
[113] Mmpa Marc Vermeulen,et al. Design for precision : current status and trends , 1998 .
[114] P. A. Mckeown,et al. Some Aspects of the Design of High Precision Measuring Machinesj , 1978 .
[115] Wolfgang Knapp,et al. Model-based ‘Chase-the-Ball’ Calibration of a 5-Axes Machining Center , 2006 .
[116] Somasundaram Valliappan,et al. Finite element analysis for optimal design of foundations due to dynamic loading , 2001 .
[117] Xiangqian Jiang,et al. Multisensor data fusion in dimensional metrology , 2009 .
[118] Benjamin Kuhrke,et al. Vermeiden von Stand-by-Zeiten verbessert die Energieeffizienz von Maschinen , 2008 .
[119] M. R. Abdi,et al. Fuzzy multi-criteria decision model for evaluating reconfigurable machines , 2009 .
[120] J. Zulaika,et al. New Concepts for Structural Components , 2009 .
[121] Andrew P. Longstaff,et al. Compensation of thermal errors on a small verticalmilling machine , 2005 .
[122] B. Lu,et al. A Displacement Method for Machine Geometry Calibration , 1988 .
[123] Rick Best,et al. Design and Construction , 2007 .
[124] P. Lin,et al. Direct volumetric error evaluation for multi-axis machines , 1993 .
[125] Markus Richter,et al. Improvement of the power factor correction in machine tools , 2010, Proceedings of 14th International Power Electronics and Motion Control Conference EPE-PEMC 2010.
[126] Sébastien Krut,et al. Locomotion approach of REMORA: A reonfigurable mobile robot for manufacturing Applications , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[127] Francesco Aggogeri,et al. Multifunctional structure solutions for Ultra High Precision (UHP) machine tools , 2010 .
[128] Holger Hanselka,et al. Development and design of an active work piece holder driven by piezo actuators , 2008, Prod. Eng..
[129] William T. Estler,et al. Large-Scale Metrology – An Update , 2002 .
[130] Christian Brecher,et al. Electrohydraulic Active Damping System , 2005 .
[131] A. Kung,et al. A Measuring Artefact for true 3D Machine Testing and Calibration , 2005 .
[132] Jian Wang,et al. On the accuracy of a Stewart platform. I. The effect of manufacturing tolerances , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.
[133] Wolfgang Knapp,et al. Measurement Uncertainty and Machine Tool Testing , 2002 .