Evaluation of delivery strategies for forest fuels applying a model for Weather-driven Analysis of Forest Fuel Systems (WAFFS)

Earlier studies have highlighted the importance of quality and quantity in forest fuel supply chains, since these parameters affect product value and handling properties, but both are constantly changing over time. Great monetary losses can be incurred if forest fuel material has to be delivered to end-users in non-optimal condition, e.g. to meet seasonal fuel demand with its large short-term variations. Thus earlier studies have also highlighted the importance of more information on the forest fuel supply chain. This paper describes development of a model for Weather-driven Analysis of Forest Fuel Systems (WAFFS) that can be used when analysing forest fuel supply chains and that accounts for both active machine activities and passive activities such as quality changes during storage. The aim was to develop a methodology that can be used to evaluate forest fuel supply chain scenarios and analyse various delivery strategies under different conditions. Application of WAFFS to evaluate delivery strategies for forest fuels showed that system improvements were possible when the right biomass was delivered at the right time. The WAFFS model gives an overview of biomass actually stored at different geographical locations and places (heaps or windrows) in terms of both quality and quantity. Delivery strategies actively prioritising biomass storage proved capable of delivering more energy when most needed, thereby improving yearly machine utilisation for contractors in the supply chain.

[1]  Juha Nurmi,et al.  Modelling moisture content and dry matter loss during storage of logging residues for energy , 2011 .

[2]  Lars Eliasson,et al.  Analysis of factors affecting productivity and costs for a high-performance chip supply system , 2017 .

[3]  B. Andersson,et al.  Forest energy in Sweden - report from seven years of whole tree utilization research. , 1984 .

[4]  Sven Werner,et al.  The heat load in district heating systems , 1984 .

[5]  Sven Werner,et al.  District heating in sequential energy supply , 2012 .

[6]  T. Nordfjell,et al.  Fuel quality changes during seasonal storage of compacted logging residues and young trees , 2007 .

[7]  Ger Devlin,et al.  Managing the moisture content of wood biomass for the optimisation of Ireland's transport supply strategy to bioenergy markets and competing industries , 2015 .

[8]  Ger Devlin,et al.  Controlling moisture content and truck configurations to model and optimise biomass supply chain logistics in Ireland , 2015 .

[9]  Mikael Rönnqvist,et al.  FuelOpt: a decision support system for forest fuel logistics , 2012, J. Oper. Res. Soc..

[10]  Robert G. Sargent,et al.  Verification and validation of simulation models , 2013, Proceedings of Winter Simulation Conference.

[11]  C. Kanzian,et al.  Design of forest energy supply networks using multi-objective optimization , 2013 .

[12]  Dana M. Johnson,et al.  Development of a simulation model of biomass supply chain for biofuel production , 2012 .

[13]  Per-Anders Hansson,et al.  Analysis of field machinery performance based on daily soil workability status using discrete event simulation or on average workday probability , 2004 .

[14]  Ljusk Ola Eriksson,et al.  Optimal storing, transport and processing for a forest-fuel supplier , 1989 .

[15]  K. Kärhä,et al.  Productivity and costs of slash bundling in Nordic conditions. , 2006 .

[16]  Shahab Sokhansanj,et al.  Forest biomass supply logistics for a power plant using the discrete-event simulation approach , 2011 .

[17]  A. Toro,et al.  Cereal harvesting – strategies and costs under variable weather conditions , 2012 .

[18]  Bernd Möller,et al.  Analysing transport costs of Danish forest wood chip resources by means of continuous cost surfaces , 2007 .

[19]  J. Banks,et al.  Discrete-Event System Simulation , 1995 .

[20]  T. Ranta,et al.  Logging residues from regeneration fellings for biofuel production - a GIS-based availability and supply cost analysis , 2002 .

[21]  Antti Asikainen.  Chipping terminal logistics , 1998 .

[22]  Sven Werner,et al.  Daily Heat Load Variation in Swedish District Heating Systems , 2013 .

[23]  Osman Balci.  Validation, verification, and testing techniques throughout the life cycle of a simulation study , 1994, WSC '94.

[24]  Juha Nurmi,et al.  The storage of logging residue for fuel , 1999 .

[25]  Olle Olsson,et al.  Keep that fire burning: Fuel supply risk management strategies of Swedish district heating plants and implications for energy security , 2016 .

[26]  O. Korpinen,et al.  Cost analysis of a satellite terminal for forest fuel supply in Finland , 2016 .

[27]  Amit Kumar,et al.  Development and implementation of integrated biomass supply analysis and logistics model (IBSAL) , 2006 .

[28]  Mikael Rönnqvist,et al.  Potential savings and cost allocations for forest fuel transportation in Sweden: A country-wide study , 2015 .

[29]  P. Rauch,et al.  Designing a regional forest fuel supply network , 2007 .

[30]  Manfred Gronalt,et al.  The Terminal Location Problem in the Forest Fuels Supply Network , 2010 .

[31]  Daniel Nilsson,et al.  SHAM—a simulation model for designing straw fuel delivery systems. Part 1: model description , 1999 .

[32]  Erik Dotzauer,et al.  Simple model for prediction of loads in district-heating systems , 2002 .

[33]  Sharon A. Winsauer,et al.  Solving wood chip transport problems with computer simulation. , 1976 .

[34]  Tapio Ranta,et al.  The profitability of transporting uncomminuted raw materials in Finland , 2006 .

[35]  Bernd Möller,et al.  Heat Roadmap Europe: Combining district heating with heat savings to decarbonise the EU energy system , 2014 .

[36]  Gernot Erber,et al.  Effects of moisture content on supply costs and CO2 emissions for an optimized energy wood supply network. , 2016 .

[37]  Taraneh Sowlati,et al.  A simulation model for the design and analysis of wood pellet supply chains , 2013 .

[38]  Taraneh Sowlati,et al.  A mixed integer non-linear programming model for tactical value chain optimization of a wood biomass power plant , 2013 .

[39]  Raida Jirjis,et al.  Storage and drying of wood fuel. , 1995 .

[40]  Taraneh Sowlati,et al.  Applications of Discrete-Event Simulation in the Forest Products Sector: A Review , 2017 .

[41]  Raida Jirjis,et al.  Fuel quality of Norway spruce stumps – influence of harvesting technique and storage method , 2011 .

[42]  Leonid Churilov,et al.  Discrete-event simulation and system dynamics for management decision making , 2014 .

[43]  L. Sikanen,et al.  Validation of prediction models for estimating the moisture content of logging residues during storage , 2016 .

[44]  Juha Nurmi,et al.  Recovery of logging residues for energy from spruce (Pices abies) dominated stands , 2007 .

[45]  Lauri Sikanen,et al.  Discrete-event simulation of an information-based raw material allocation process for increasing the efficiency of an energy wood supply chain , 2015 .

[46]  Juan Majada,et al.  A spatial analysis of woodfuel based on WISDOM GIS methodology: Multiscale approach in Northern Spain , 2015 .

[47]  Cleveland J. Biller,et al.  Wood-Chipping and a Balanced Logging System Simulation Can Check the Combinations , 1974 .

[48]  Kalle Karttunen,et al.  The Operational Efficiency of Waterway Transport of Forest Chips on Finland's Lake Saimaa , 2012 .

[49]  Anders Eriksson,et al.  Simulation-based evaluation of supply chains for stump fuel , 2014 .

[50]  Johanna Routa,et al.  Precision measurement of forest harvesting residue moisture change and dry matter losses by constant weight monitoring , 2015 .

[51]  L. S. Pereira,et al.  Crop evapotranspiration : guidelines for computing crop water requirements , 1998 .

[52]  Per-Anders Hansson,et al.  Effects of Supply Chain Strategy on Stump Fuel Cost: A Simulation Approach , 2014 .

[53]  K. Ericsson,et al.  The introduction and expansion of biomass use in Swedish district heating systems , 2016 .