Optimisation of steel fibre reinforced concretes by means of statistical response surface method

Abstract The objective of this research is to optimise the fracture parameters of steel fibre reinforced concretes to obtain a more ductile behaviour than that of plain concrete. The effects of the aspect ratio (L/d) and volume fraction of steel fibre (Vf) on fracture properties of concrete in bending were investigated by measuring the fracture energy (GF) and characteristic length (lch). For optimisation, three-level full factorial experimental design and response surface method were used. The results show that the effects of fibre volume fraction and aspect ratio on fracture energy and characteristic length are very significant.

[1]  G. Derringer,et al.  Simultaneous Optimization of Several Response Variables , 1980 .

[2]  Arne Hillerborg,et al.  Concrete fracture energy tests performed by 9 laboratories according to a draft RILEM recommendation : Report to RILEM TC50-FMC , 1983 .

[3]  T. Celik,et al.  Effect of silica fume and steel fibers on some properties of high-strength concrete , 1997 .

[4]  A. M. Brandt.  Cement-based Composites: Materials, Mechanical Properties and Performance , 1995 .

[5]  Y. Uchida,et al.  Tension softening diagrams and evaluation of properties of steel fiber reinforced concrete , 2000 .

[6]  Victor C. Li,et al.  A micromechanical model of tension-softening and bridging toughening of short random fiber reinforced brittle matrix composites , 1991 .

[7]  Perumalsamy N. Balaguru,et al.  FLEXURAL TOUGHNESS OF STEEL FIBER REINFORCED CONCRETE , 1992 .

[8]  Bhushan Lal Karihaloo,et al.  Design of concrete mixes for minimum brittleness , 1996 .

[9]  F. Wafa,et al.  Mechanical Properties of High-Strength Fiber Reinforced Concrete , 1992 .

[10]  Joaquim Figueiras,et al.  Flexural Behavior of SFRC: Testing and Modeling , 1999 .

[11]  B. L. Karihaloo,et al.  Optimization techniques for the design of high-performance fibre-reinforced concrete , 2001 .

[12]  Bhushan Lal Karihaloo,et al.  Design of Fiber-Reinforced DSP Mixes for Minimum Brittleness , 1998 .

[13]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[14]  D. Hordijk.  Local approach to fatigue of concrete , 1991 .

[15]  Douglas C. Montgomery,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[16]  Rilem.  FMC 1 Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams , 1985 .

[17]  Wei Sun,et al.  Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete , 1997 .