Flow characteristics prediction in pump mode of a pump turbine using large eddy simulation

To obtain more accurate flow characteristics of pump turbines, the method of large eddy simulation with wall-adapting local eddy viscosity model is applied in simulating several operating points in the pump mode. Firstly, based on the experimental validation, the method of large eddy simulation could better predict the external performance and internal flow characteristics in a pump turbine in the pump mode compared with the method of Reynolds-averaged Navier–Stokes with two-equation turbulence model shear stress transport k–ω. Then, flow characteristics under 1.00QBEP (best efficiency point), 0.91QBEP, 0.88QBEP, and 0.85QBEP operating points are investigated to find out the causes of the head drop in the energy-discharge curve through large eddy simulation. The detailed analysis reveals that the head drop at the point 0.85QBEP is related to the recirculation flow at the runner inlet. Finally, unsteady studies confirm that vortex movement at the runner inlet lead to the variation of the amplitudes and directions of the velocity, which generates the rotation of the separation vortices in the runner and stay vane channels.

[1]  Christian Brix Jacobsen,et al.  Flow in a Centrifugal Pump Impeller at Design and Off-Design Conditions—Part II: Large Eddy Simulations , 2003 .

[2]  J. Morchain,et al.  LES and URANS simulations of hydrodynamics in mixing tank: Comparison to PIV experiments , 2008 .

[3]  Deyou Li,et al.  Numerical Investigation in the Vaned Distributor under Different Guide Vanes Openings of a Pump Turbine in Pump Mode , 2016 .

[4]  Dazhuan Wu,et al.  Numerical investigation on the “S” characteristics of a reduced pump turbine model , 2011 .

[5]  F. Nicoud,et al.  Subgrid-Scale Stress Modelling Based on the Square of the Velocity Gradient Tensor , 1999 .

[6]  Deyou Li,et al.  Dynamic analysis on pressure fluctuation in vaneless region of a pump turbine , 2015 .

[7]  Numerical analysis of rotating stall instabilities of a pump- turbine in pump mode , 2014 .

[8]  Ali Turan,et al.  Predictions of Turbulent Flow for the Impeller of a NASA Low-Speed Centrifugal Compressor , 2010 .

[9]  Leqin Wang,et al.  Numerical investigation of the hump characteristic of a pump-turbine based on an improved cavitation model , 2012 .

[10]  Dazhuan Wu,et al.  Performance prediction and flow analysis in the vaned distributor of a pump turbine under low flow rate in pump mode , 2010 .

[11]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[12]  Daqing Qin,et al.  Numerical investigation on transient flow of a high head low specific speed pump-turbine in pump mode , 2015 .

[13]  Shouqi Yuan,et al.  Experimental Characterization of a Pump–Turbine in Pump Mode at Hump Instability Region , 2015 .

[14]  Xue-lin Tang,et al.  Comparison of Several Subgrid-Scale Models for Large-Eddy Simulation of Turbulent Flows in Water Turbine , 2009 .

[15]  Yue Zhao,et al.  Assessment of Les Performance in Simulating Complex 3D Flows in Turbo-Machines , 2012 .

[16]  Li Deyou,et al.  Unsteady simulation and analysis for hump characteristics of a pump turbine model , 2015 .

[17]  François Avellan,et al.  High-resolution LES of the rotating stall in a reduced scale model pump-turbine , 2014 .