A serpentine laminating micromixer combining splitting/recombination and advection.

Mixing enhancement has drawn great attention from designers of micromixers, since the flow in a microchannel is usually characterized by a low Reynolds number (Re) which makes the mixing quite a difficult task to accomplish. In this paper, a novel integrated efficient micromixer named serpentine laminating micromixer (SLM) has been designed, simulated, fabricated and fully characterized. In the SLM, a high level of efficient mixing can be achieved by combining two general chaotic mixing mechanisms: splitting/recombination and chaotic advection. The splitting and recombination (in other terms, lamination) mechanism is obtained by the successive arrangement of "F"-shape mixing units in two layers. The advection is induced by the overall three-dimensional serpentine path of the microchannel. The SLM was realized by SU-8 photolithography, nickel electroplating, injection molding and thermal bonding. Mixing performance of the SLM was fully characterized numerically and experimentally. The numerical mixing simulations show that the advection acts favorably to realize the ideal vertical lamination of fluid flow. The mixing experiments based on an average mixing color intensity change of phenolphthalein show a high level of mixing performance was obtained with the SLM. Numerical and experimental results confirm that efficient mixing is successfully achieved from the SLM over the wide range of Re. Due to the simple and mass producible geometry of the efficient micromixer, SLM proposed in this study, the SLM can be easily applied to integrated microfluidic systems, such as micro-total-analysis-systems or lab-on-a-chip systems.

[1]  T. H. Kwon,et al.  Enhancement of mixing performance of single‐screw extrusion processes via chaotic flows: Part I. Basic concepts and experimental study , 1996 .

[2]  T. Kwon,et al.  Dynamical modeling of chaos single‐screw extruder and its three‐dimensional numerical analysis , 2000 .

[3]  Steffen Hardt,et al.  Laminar mixing in different interdigital micromixers: II. Numerical simulations , 2003 .

[4]  T. G. Kang,et al.  Colored particle tracking method for mixing analysis of chaotic micromixers , 2004 .

[5]  Norbert Schwesinger,et al.  A modular microfluid system with an integrated micromixer , 1996 .

[6]  P. Tabeling,et al.  Chaotic mixing in electrokinetically and pressure driven micro flows , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[7]  T. Johnson,et al.  Rapid microfluidic mixing. , 2002, Analytical chemistry.

[8]  Dong Sung Kim,et al.  A barrier embedded chaotic micromixer , 2004 .

[9]  Helen Song,et al.  Controlling nonspecific protein adsorption in a plug-based microfluidic system by controlling interfacial chemistry using fluorous-phase surfactants. , 2005, Analytical chemistry.

[10]  A Bertsch,et al.  Static micromixers based on large-scale industrial mixer geometry. , 2001, Lab on a chip.

[11]  A. Manz,et al.  Miniaturized total chemical analysis systems: A novel concept for chemical sensing , 1990 .

[12]  T. Johnson,et al.  Characterization and optimization of slanted well designs for microfluidic mixing under electroosmotic flow. , 2002, Lab on a chip.

[13]  I. Mezić,et al.  Chaotic Mixer for Microchannels , 2002, Science.

[14]  Jin-Woo Choi,et al.  A novel in-plane passive microfluidic mixer with modified Tesla structures. , 2004, Lab on a chip.

[15]  Robin H. Liu,et al.  Passive mixing in a three-dimensional serpentine microchannel , 2000, Journal of Microelectromechanical Systems.

[16]  Dong-Woo Cho,et al.  A barrier embedded Kenics micromixer , 2004 .

[17]  V Hessel,et al.  An optimised split-and-recombine micro-mixer with uniform chaotic mixing. , 2004, Lab on a chip.