论文信息 - Characteristics of hydrogenated amorphous silicon alloy solar cells on a Lambertian back reflector

Characteristics of hydrogenated amorphous silicon alloy solar cells on a Lambertian back reflector

Hydrogenated amorphous silicon (a‐Si) alloy n i p solar cells have been prepared on back reflectors exhibiting Lambertian light scattering characteristics. The Lambertian back reflector consists of highly textured Ag/ZnO films deposited on stainless‐steel substrates. Contrary to expectation, the current voltage (I‐V) characteristics under illumination are marginally poorer than the corresponding characteristics of cells grown on conventional back reflectors. The stabilized efficiency is similar for both cases. The dependence of the cell performance on the texture of the back reflector is discussed.

[1] S. Guha,et al. Double‐junction amorphous silicon‐based solar cells with 11% stable efficiency , 1992 .

[2] S. Guha,et al. Study of back reflectors for amorphous silicon alloy solar cell application , 1991 .

[3] Rajeewa R. Arya,et al. Absorption enhancement in hydrogenated amorphous silicon‐based solar cells , 1990 .

[4] F. Leblanc,et al. Numerical modeling of the optical properties of hydrogenated amorphous‐silicon‐based p‐i‐n solar cells deposited on rough transparent conducting oxide substrates , 1994 .

[5] Eli Yablonovitch,et al. Optically enhanced amorphous silicon solar cells , 1983 .

[6] Hiroshi Sakai,et al. Effects of Surface Morphology of Transparent Electrode on the Open-Circuit Voltage in a-Si:H Solar Cells , 1990 .

[7] Subhendu Guha,et al. Experimental study of p layers in ‘‘tunnel’’ junctions for high efficiency amorphous silicon alloy multijunction solar cells and modules , 1994 .