Moored floating breakwater response to regular and irregular waves

Abstract The simple, yet versatile numerical technique particularly suitable for investigating the problem of the wave attenuation by moored floating breakwater was recently developed by the author. In order to verift the theory, nearly full scale model tests were conducted in a large wave tank ( 3.6 m wide × 4.5 m high × 106 m long ). Both random waves and monochromatic waves were used to compare the results. A breakwater with a rectangular cross-section and a hydrodynamically shaped «three-cycle cylindera breakwater were tested. Incident wave spectra were successfully decomposed from the multi-reflected sea spectra. Frequency response functions of transmitted wave, sway, heave and roll motions of the breakwater as well as mooring forces were all experimentally determined and compared with the theory. Generally, excellent agreements between the theory, the random wave tests and the monochromatic wave tests were obtained for the hydrodynamically shaped breakwater. Except near the modal frequencies of body motion generally good agreement between theory and experiment was obtained for the rectangular breakwater. Near the modal frequencies, the body motion was damped by the flow separation at the sharp corners of the rectangular breakwater. Generation of higher harmonics in wave, body motion and mooring forces was observed and measured, but was generally small. The slow drift oscillation and its effects on the performance of the spring moored breakwaters were also small. From the comaprisons of the small scale test and the large scale tests, it was found that the scale effects were negligibly small on the performance of the spring-moored breakwaters.