Mitigation of Inrush Currents in Network Transformers by Reducing the Residual Flux With an Ultra-Low-Frequency Power Source

A methodology for the reduction of the residual flux in network transformers is proposed in this paper. The purpose is the mitigation of large inrush currents taken by numerous transformers when a long feeder is energized. Time-domain simulations are used to prove that a small-power device can substantially reduce the residual flux of all transformers simultaneously. The device consists of a low-voltage dc source, a suitable power-electronic switching unit, and a simple controller. Before a feeder is re-energized, the residual flux is reduced to a minimum and, as a consequence, the large inrush currents are reduced to an acceptable level. This greatly enhances the probability for the feeder to be successfully energized when otherwise a false trip would have occurred. Inrush current reductions of more than 60% are obtained at the head of the feeder.

[1]  J. Faiz,et al.  A novel wavelet-based algorithm for discrimination of internal faults from magnetizing inrush currents in power transformers , 2006, IEEE Transactions on Power Delivery.

[2]  X.H. Wang,et al.  Correlation Analysis of Waveforms in Nonsaturation Zone-Based Method to Identify the Magnetizing Inrush in Transformer , 2006, IEEE Transactions on Power Delivery.

[3]  Chih-Kun Cheng,et al.  Asymmetrical winding configuration to reduce inrush current with appropriate short-circuit current in transformer , 2005 .

[4]  J.F. Brudny,et al.  Reduction Of Inrush Current In Single-phase Transformer Using Virtual Air Gap Technique , 1998, 7th Joint MMM-Intermag Conference. Abstracts (Cat. No.98CH36275).

[5]  A. Adly.  Computation of inrush current forces on transformer windings , 2001 .

[6]  D. Povh,et al.  Analysis of Overvoltages Caused by Transformer Magnetizing Inrush Current , 1978, IEEE Transactions on Power Apparatus and Systems.

[7]  Muhammad H. Rashid,et al.  Power Electronics: Circuits, Devices and Applications , 1993 .

[8]  P. Kundur,et al.  Assessing and limiting impact of transformer inrush current on power quality , 2006, IEEE Transactions on Power Delivery.

[9]  M. S. Sachdev,et al.  Design, implementation and testing of a microprocessor-based high-speed relay for detecting transformer winding faults , 1992 .

[10]  M. Suzuki,et al.  Digital protection method for power transformers based on an equivalent circuit composed of inverse inductance , 1988 .

[11]  J. Faiz,et al.  Three- and Two-Dimensional Finite-Element Computation of Inrush Current and Short-Circuit Electromagnetic Forces on Windings of a Three-Phase Core-Type Power Transformer , 2008, IEEE Transactions on Magnetics.

[12]  Chih-Kun Cheng,et al.  Novel approach to reducing the inrush current of a power transformer , 2004 .

[13]  R. Iravani,et al.  An accurate hysteresis model for ferroresonance analysis of a transformer , 2008, 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century.

[14]  O. A. Mahgoub.  Microcontroller-based switch for three-phase transformer inrush current minimization , 1996, V IEEE International Power Electronics Congress Technical Proceedings, CIEP 96.

[15]  E.P. Dick,et al.  Transformer Models for Transient Studies Based on Field Measurements , 1981, IEEE Transactions on Power Apparatus and Systems.

[16]  Raj Aggarwal,et al.  A wavelet transform based decision making logic method for discrimination between internal faults and inrush currents in power transformers , 2000 .

[17]  K. J. Frohlich,et al.  Elimination of transformer inrush currents by controlled switching. I. Theoretical considerations , 2001 .

[18]  M. S. Sachdev,et al.  Online identification of magnetizing inrush and internal faults in three-phase transformers , 1992 .

[19]  Pei Liu,et al.  Improved operation of differential protection of power transformers for internal faults , 1992 .

[20]  B. Jeyasurya,et al.  A state-of-the-art review of transformer protection algorithms , 1988 .

[21]  Joydeep Mitra,et al.  Hybrid Transformer Model for Transient Simulation—Part I: Development and Parameters , 2007, IEEE Transactions on Power Delivery.

[22]  Kuniaki Yabe,et al.  Power differential method for discrimination between fault and magnetizing inrush current in transformers , 1996 .

[23]  K. J. Frohlich,et al.  Elimination of transformer inrush currents by controlled switching. II. Application and performance considerations , 2001 .

[24]  E.F. El-Saadany,et al.  Investigation of Magnetizing Inrush Current in a Single-Phase Transformer , 2006, 2006 Large Engineering Systems Conference on Power Engineering.

[25]  M. Steurer,et al.  The Impact of Inrush Currents on the Mechanical Stress of High-Voltage Power Transformer Coils , 2001, IEEE Power Engineering Review.