Modeling the robotic manipulation of woven carbon fiber prepreg plies onto double curved molds: A path-dependent problem

This paper investigates the behavior of woven prepreg plies being placed on a weakly double curved mold by a robot. It is essential that the draped configuration is free from wrinkles. The baseline is a virtual draping environment that can plan and simulate robot draping sequences. It consists of a kinematic mapping algorithm for obtaining target points for the grippers on the mold surface. A simple motion planner is used to calculate the trajectories of the grippers. Here, two conceptually different draping strategies are employed. Finally, the two generated draping sequences are simulated using a transient, non-linear finite element model and compared w.r.t. their predicted wrinkle formations. Material data are obtained by means of tension, bias-extension and cantilever tests. The numerical examples show that the virtual draping environment can aid in developing the automatic draping system but that the generation of feasible draping sequences is highly path dependent and non-trivial.

[1]  P. Boisse,et al.  A Hyperelastic Approach for Composite Reinforcement Large Deformation Analysis , 2010 .

[2]  P. Boisse,et al.  Curvature determination in the bending test of continuous fibre reinforcements , 2017 .

[3]  Gilbert Lebrun,et al.  Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics , 2003 .

[4]  Woong‐Ryeol Yu,et al.  A simple anisotropic hyperelastic constitutive model for textile fabrics with application to forming simulation , 2013 .

[5]  Mpf Sutcliffe,et al.  A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites , 2007 .

[6]  M. Hojjati,et al.  A new test method for the characterization of the bending behavior of textile prepregs , 2017 .

[7]  James A. Sherwood,et al.  Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results , 2008 .

[8]  Jean Louis Billoet,et al.  Mechanical and numerical modelling of composite manufacturing processes deep-drawing and laying-up of thin pre-impregnated woven fabrics , 2001 .

[9]  Israel Herszberg,et al.  The shear properties of woven carbon fabric , 1999 .

[10]  P. Taylor,et al.  3D mathematical modelling for robotic pick up of textile composites , 2009 .

[11]  Kevin D Potter,et al.  The use of kinematic drape modelling to inform the hand lay-up of complex composite components using woven reinforcements , 2006 .

[12]  J. R. Womersley.  6.—THE APPLICATION OF DIFFERENTIAL GEOMETRY TO THE STUDY OF THE DEFORMATION OF CLOTH UNDER STRESS , 1937 .

[13]  H. M. Taylor,et al.  39—The Fitting of Woven Cloth to Surfaces , 1956 .

[14]  Ignace Verpoest,et al.  Drape-ability characterization of textile composite reinforcements using digital image correlation , 2007 .

[15]  J. Teng,et al.  Theoretical Modeling of Large Shear Deformation and Wrinkling of Plain Woven Composite , 2009 .

[16]  Kwansoo Chung,et al.  Non-orthogonal constitutive equation for woven fabric reinforced thermoplastic composites , 2002 .

[17]  J. Sherwood,et al.  Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture , 2015 .

[18]  James A. Sherwood,et al.  Discrete mesoscopic modeling for the simulation of woven-fabric reinforcement forming , 2010 .

[19]  G. Hivet,et al.  The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review , 2017 .

[20]  T. Vu-khanh,et al.  Forming of Woven Fabric Composites , 1994 .

[21]  F. Van Der Weeën,et al.  Algorithms for draping fabrics on doubly‐curved surfaces , 1991 .

[22]  P. Grosberg,et al.  The Mechanical Properties of Woven Fabrics , 1966 .

[23]  K. Potter,et al.  The engineering aspects of automated prepreg layup: History, present and future , 2012 .

[24]  T. Gereke,et al.  Decoupling the bending behavior and the membrane properties of finite shell elements for a correct description of the mechanical behavior of textiles with a laminate formulation , 2014 .

[25]  Andrew C. Long,et al.  Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments , 2004 .

[26]  Philip G. Harrison,et al.  Modelling the forming mechanics of engineering fabrics using a mutually constrained pantographic beam and membrane mesh , 2016 .

[27]  K. Chung,et al.  Analysis of flexible bending behavior of woven preform using non-orthogonal constitutive equation , 2005 .

[28]  Emmanuelle Vidal-Salle,et al.  Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses , 2011 .

[29]  S. Chatel,et al.  Semi-discrete shell finite elements for textile composite forming simulation , 2009 .

[30]  R. Cook,et al.  Concepts and Applications of Finite Element Analysis , 1974 .

[31]  M. Neitzel,et al.  Deep drawing of fabric‐reinforced thermoplastics: Wrinkle formation and their reduction , 1996 .