Model-based optimization of the operation procedure of emulsification

Emulsions are widely encountered in the food and cosmetic industry. The first food we consume is an emulsion, namely breast milk. Other common emulsions are mayonnaise, dressings, skin creams and lotions. Equipment often used for the production of oil-in-water emulsions in the food industry consists of a stirred vessel in combination with a colloid mill and a circulation pipe. Within this set-up there are two main variations: i) Configuration I where the colloid mill acts like a shearing device and at the same time as a pump. This configuration is used in the majority of the production facilities, and ii) Configuration II where the shearing and pumping action are not coupled. The operation procedure for obtaining a certain predefined emulsion quality is often established based on experience (best practice). This is most probably time-consuming (e.g. large experimental efforts for new developed products) and it is also unclear if the process is operated at its optimum (e.g. in minimum time). An other drawback is that there is no feedback during the production process. Hence, it is not possible to deal with disturbances acting on the process. A possible consequence is that, at the end of the production process, the product quality specifications are not met and the product has to be classified as off-spec. In order to be able to enlarge the efficiency of the production processes and to shorten the time to market of new products - and therewith create an advantage over competition - it is necessary to overcome these limitations of the current operation procedure. In the work reported a first step is set into this direction. A model describing the droplet size distribution (DSD) and the emulsion viscosity as function of the time was developed and several off-line optimization studies were performed. The model comprises several fit parameters and experiments were performed in order to estimate the values of these parameters. A number of additional experiments were performed to compare the simulated results with the measurements (model validation). The results of the parameter estimation and the model validation show that the simulated results are qualitatively in good agreement with the measurement data. Given the overall performance of the model it is expected that the model quality is sufficient to render practical relevant optimization results. Although the optimization studies have been performed for a model emulsion, small scale equipment and are not yet experimentally validated, the results of this work strongly suggest that it is indeed possible to minimize the production times and to shorten the product development times for new products. This overall conclusion is based on the following observations: 1) The optimization results show that it is beneficial to produce emulsions with Configuration II: - Configuration II allows the production of emulsions with a bi-modal DSD. No operation procedure was found for the production of such an emulsion in Configuration I. - The production of emulsions in Configuration II is always at least as fast as in Configuration I. 2) The followed approach allows to calculate: * If an emulsion with a certain, predefined, DSD and emulsion viscosity can be produced. * How the process should be controlled in order to produce such an emulsion. * How the process should be controlled to produce this emulsion in minimal time. 3) The optimization results show that it is possible to produce emulsions with: * A bi-modal DSD. * Less oil while maintaining a similar DSD and value of the emulsion viscosity evaluated at a shear rate of 10 1/s by adapting only the operation procedure. Hence, the addition of extra stabilizers is not considered. This offers possibilities for the production of a broader range of emulsion products and could direct product development in a new direction. Based on this, it is worthwhile and therefore recommended to expand this research work in the direction of industrial emulsions.

[1]  Babatunde A. Ogunnaike,et al.  Process engineering in the evolving chemical industry , 2000 .

[2]  Lawrence L. Tavlarides,et al.  Description of interaction processes in agitated liquid-liquid dispersions , 1977 .

[3]  C. F. Curtiss,et al.  Tangential Newtonian flow in annuli—I , 1959 .

[4]  Julio R. Banga,et al.  Stochastic Dynamic Optimization of Batch and Semicontinuous Bioprocesses , 1997 .

[5]  A Boon,et al.  Influence of dynamic interfacial properties on droplet breakup in simple shear flow , 1994 .

[6]  H. Meijer,et al.  Dynamics of liquid-liquid mixing : a 2-zone model , 1995 .

[7]  W. Agterof,et al.  Droplet breakup in concentrated emulsions , 2001 .

[8]  Neal R. Amundson,et al.  Analysis of Breakage in Dispersed Phase Systems , 1966 .

[9]  Rein Luus,et al.  Application of dynamic programming to differential-algebraic process systems , 1993 .

[10]  Alberto Bemporad,et al.  Control of systems integrating logic, dynamics, and constraints , 1999, Autom..

[11]  M. Nagurka,et al.  Optimal control of linearly constrained linear systems via state parametrization , 1992 .

[12]  Jan Prüss,et al.  A population balance model for disperse systems: Drop size distribution in emulsion , 1998 .

[13]  Ka Ming Ng,et al.  New discretization procedure for the breakage equation , 1995 .

[14]  H. P. Grace.  DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMS , 1982 .

[15]  Doraiswami Ramkrishna,et al.  Population Balances: Theory and Applications to Particulate Systems in Engineering , 2000 .

[16]  Heh Han Meijer,et al.  Transient phenomena in dispersive mixing , 1993 .

[17]  Ekkehard W. Sachs,et al.  Optimal Control of the Sterilization of Prepackaged Food , 1999, SIAM J. Optim..

[18]  Ka Ming Ng,et al.  Statistics of multiple particle breakage , 1996 .

[19]  R. Chhabra,et al.  Non-Newtonian flow in the process industries : fundamentals and engineering applications , 1999 .

[20]  Leonard G. Austin,et al.  Some Results on the Description of Size Reduction as a Rate Process in Various Mills , 1976 .

[21]  H. M. Princen,et al.  Rheology of foams and highly concentrated emulsions , 1983 .

[22]  ’. H.A.STONE,et al.  Satellite and subsatellite formation in capillary breakup , 1980 .

[23]  Costas Tsouris,et al.  Breakage and coalescence models for drops in turbulent dispersions , 1994 .

[24]  J. A. Wieringa,et al.  Droplet breakup mechanisms during emulsification in colloid mills at high dispersed phase volume fraction , 1996 .

[25]  Chyi Hwang,et al.  OPTIMAL CONTROL COMPUTATION FOR DIFFERENTIAL-ALGEBRAIC PROCESS SYSTEMS WITH GENERAL CONSTRAINTS , 1990 .

[26]  Fumio Oosawa,et al.  Interaction between particles suspended in solutions of macromolecules , 1958 .

[27]  Sunil K. Agrawal,et al.  Optimization of Dynamic Systems , 1999 .

[28]  D. Ramkrishna,et al.  ON THE SOLUTION OF POPULATION BALANCE EQUATIONS BY DISCRETIZATION--I . A FIXED PIVOT TECHNIQUE , 2003 .

[29]  Salamon Eskinazi,et al.  Principles of Fluid Mechanics , 1962 .

[30]  Eva Balsa-Canto,et al.  Improving food processing using modern optimization methods , 2003 .

[31]  K. Riet,et al.  The behaviour of gas—liquid mixtures near Rushton turbine blades , 1973 .

[32]  H. J.,et al.  Hydrodynamics , 1924, Nature.

[33]  D. Himmelblau,et al.  Optimization of Chemical Processes , 1987 .

[34]  Bernard P. Binks,et al.  Modern Aspects of Emulsion Science , 2007 .

[35]  Johannes Tramper,et al.  Basic Bioreactor Design , 1991 .

[36]  Johannes Andries Roubos,et al.  An evolutionary strategy for fed-batch bioreactor optimization; concepts and performance , 1999 .

[37]  R. Sargent,et al.  Solution of a Class of Multistage Dynamic Optimization Problems. 2. Problems with Path Constraints , 1994 .

[38]  Howard A. Stone,et al.  Dynamics of Drop Deformation and Breakup in Viscous Fluids , 1994 .

[39]  R. Faure,et al.  Introduction to operations research , 1968 .

[40]  Björn Sohlberg,et al.  Supervision and control for industrial processes , 1998 .

[41]  Roger C. Baker,et al.  Flow Measurement Handbook: Industrial Designs, Operating Principles, Performance, and Applications , 2000 .

[42]  Thomas F. Irvine,et al.  A GENERALIZED BLASIUS EQUATION FOR POWER LAW FLUIDS , 1988 .

[43]  Sanjeev Kumar,et al.  Alternative mechanisms of drop breakup in stirred vessels , 1991 .

[44]  D. Ramkrishna,et al.  On the solution of population balance equations by discretization - III. Nucleation, growth and aggregation of particles , 1997 .

[45]  R. Borwankar.  Food texture and rheology: A tutorial review , 1992 .

[46]  P. Becher,et al.  Encyclopedia of emulsion technology , 1983 .

[47]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .

[48]  R. Pal.  Scaling of relative viscosity of emulsions , 1997 .

[49]  Lígia Maria Ribeiro,et al.  The dynamic behaviour of liquid-liquid agitated dispersions—I. The hydrodynamics , 1995 .

[50]  C. G. Sunner.  Emulsions in theory and practice. , 1960 .

[51]  Yoshimi Terajima,et al.  Retort Temperature Profile for Optimum Quality during Conduction‐Heating of Foods in Retortable Pouches , 1996 .

[52]  Costas Kiparissides,et al.  Generalized model for prediction of the steady-state drop size distributions in batch stirred vessels , 1989 .

[53]  R. A. De Bruijn,et al.  Tipstreaming of drops in simple shear flows , 1993 .

[54]  S. Saito,et al.  EFFECT OF DISPERSED-PHASE VISCOSITY ON THE MAXIMUM STABLE DROP SIZE FOR BREAKUP IN TURBULENT FLOW , 1977 .

[55]  V. K. Jayaraman,et al.  Dynamic Optimization of Fed‐Batch Bioreactors Using the Ant Algorithm , 2001, Biotechnology progress.

[56]  L. Biegler,et al.  Advances in simultaneous strategies for dynamic process optimization , 2002 .

[57]  Pieter Walstra,et al.  Principles of emulsion formation , 1993 .

[58]  K. S. Gandhi,et al.  Breakage of viscous and non-Newtonian drops in stirred dispersions , 1986 .

[59]  L. V. Willigenburg,et al.  Robust optimal receding horizon control of the thermal sterilization of canned foods , 1999 .

[60]  Nilay Shah,et al.  Modelling and optimisation of general hybrid systems in the continuous time domain , 1998 .

[61]  Julio M. Ottino,et al.  Mixing and Dispersion of Viscous Liquids and Powdered Solids , 1999 .

[62]  Ion-Olimpius Stamatescu,et al.  A practical approach to recipe improvement and optimization in the batch processing industry , 1996 .

[63]  L. J. Alvarez-V.  Modelling and control of natural convection in canned foods , 1999 .

[64]  S. Ross,et al.  Colloidal Dispersions: Suspensions, Emulsions, and Foams , 2002 .