Role of transmission electron microscopy in the semiconductor industry for process development and failure analysis

Transmission electron microscope (TEM) based techniques offer superior spatial resolution and highly sensitive elemental analysis capabilities that can be exploited for metrology and materials characterization of sub-nanometer sized device features in advanced semiconductor technologies. TEM based techniques are suited for evaluating interfacial details, dimensions of device structures, and defects or flaws that arise during the fabrication process. In this work, TEM based techniques that are commonly used for physical characterization, compositional analysis, and failure analysis of semiconductor device structures are reviewed. Sample preparation methods, based on focused ion beam milling that is capable of site specific sample preparation, are also reviewed. The strength of these methods as well as problems, such as focused ion beam induced damage and gallium contamination, and methods to control them are described. Examples are presented from case studies that are required for process development, yield enhancement, and failure analysis of semiconductor manufacturing. Challenges faced due to introduction of alternative gate structures, nano-sized features, high-K gate dielectrics, and new materials needs in the integration of device structures are addressed.

[1]  J. Spence.  High-Resolution Electron Microscopy , 2003 .

[2]  R. Egerton.  Electron Energy-Loss Spectroscopy in the Electron Microscope , 1995, Springer US.

[3]  David A. Muller,et al.  Gate dielectric metrology using advanced TEM measurements , 2001 .

[4]  L. Reimer.  Transmission Electron Microscopy: Physics of Image Formation and Microanalysis , 1989 .

[5]  M. Hÿtch,et al.  Measurement of the displacement field of dislocations to 0.03 Å by electron microscopy , 2003, Nature.

[6]  Douglas A. Buchanan,et al.  Scaling the gate dielectric: Materials, integration, and reliability , 1999, IBM J. Res. Dev..

[7]  R. Wallace,et al.  High-κ gate dielectrics: Current status and materials properties considerations , 2001 .

[8]  Lucille A. Giannuzzi,et al.  Introduction to focused ion beams : instrumentation, theory, techniques, and practice , 2010 .

[9]  C. Boothroyd,et al.  Strain analysis in silicon substrates under uniaxial and biaxial stress by convergent beam electron diffraction , 2005 .

[10]  M. McCartney,et al.  Quantitative Analysis of 2-D Electrostatic Potential Distributions in 90-nm Si pMOSFETs Using Off-Axis Electron Holography , 2007, IEEE Transactions on Electron Devices.

[11]  D. Gilmer,et al.  Hafnium silicon oxide films prepared by atomic layer deposition , 2004 .

[12]  P. H. Citrin,et al.  Atomic-scale imaging of individual dopant atoms and clusters in highly n-type bulk Si , 2002, Nature.

[13]  Urao,et al.  Method for Cross-sectional Transmission Electron Microscopy Specimen Preparation of Composite Materials Using a Dedicated Focused Ion Beam System , 1999, Microscopy and Microanalysis.

[14]  G. Thomas,et al.  Transmission electron microscopy of materials , 1979 .

[15]  N. I. Kato,et al.  A PLASMA-POLYMERIZED PROTECTIVE FILM FOR TRANSMISSION ELECTRON MICROSCOPY SPECIMEN PREPARATION BY FOCUSED ION BEAM ETCHING , 1998 .

[16]  Sing-Pin Tay,et al.  Characterization of high-K dielectric ZrO2 films annealed by rapid thermal processing , 2001 .

[17]  Howard R. Huff,et al.  Physicochemical properties of HfO2 in response to rapid thermal anneal , 2003 .

[18]  Raghaw Rai,et al.  Compatibility of polycrystalline silicon gate deposition with HfO2 and Al2O3/HfO2 gate dielectrics , 2002 .

[19]  K. Easterling,et al.  Cellular morphologies in a de-alloying residue , 1987 .

[20]  David B. Williams,et al.  Transmission Electron Microscopy , 1996 .

[21]  STEM imaging applications in deep-sub-micron failure analysis and process characterization , 2003, Proceedings of the 10th International Symposium on the Physical and Failure Analysis of Integrated Circuits. IPFA 2003.

[22]  C. Bulle-lieuwma,et al.  Novel scheme for the preparation of transmission electron microscopy specimens with a focused ion beam , 1993 .

[23]  Kah-Wee Ang,et al.  Lattice strain analysis of transistor structures with silicon–germanium and silicon–carbon source∕drain stressors , 2005 .

[24]  M. Mackenzie,et al.  Interfacial reactions in a HfO2∕TiN/poly-Si gate stack , 2006 .

[25]  M. Mackenzie,et al.  Electron energy-loss spectrum imaging of high-k dielectric stacks , 2006 .

[26]  S J Pennycook,et al.  Thin Dielectric Film Thickness Determination by Advanced Transmission Electron Microscopy , 2003, Microscopy and Microanalysis.

[27]  J. Benedict,et al.  Recent Developments in the use of the Tripod Polisher for TEM Specimen Preparation , 1991 .

[28]  Raghaw Rai,et al.  Thermodynamic stability of high-K dielectric metal oxides ZrO2 and HfO2 in contact with Si and SiO2 , 2002 .

[29]  Peter Schwander,et al.  TWO-DIMENSIONAL MAPPING OF THE ELECTROSTATIC POTENTIAL IN TRANSISTORS BY ELECTRON HOLOGRAPHY , 1999 .

[30]  M. Stoker,et al.  Characteristics of Mixed Oxides and Nanolaminates of Atomic Layer Deposited HfO2 – TiO2 Gate Dielectrics , 2006 .

[31]  M. O'Keefe,et al.  HRTEM Image Simulations for Gate Oxide Metrology , 2000, Microscopy and Microanalysis.

[32]  T. Kamino,et al.  Implanted gallium-ion concentrations of focused-ion-beam prepared cross sections , 1998 .

[33]  J. McDonald,et al.  Diffusion and Adhesion of Cu/Parylene , 1990 .

[34]  Y. Taur,et al.  Quantum-mechanical modeling of electron tunneling current from the inversion layer of ultra-thin-oxide nMOSFET's , 1997, IEEE Electron Device Letters.

[35]  Robert Sinclair,et al.  The preparation of cross‐section specimens for transmission electron microscopy , 1984 .

[36]  Lucille A. Giannuzzi,et al.  Focused Ion Beam Milling and Micromanipulation Lift-Out for Site Specific Cross-Section Tem Specimen Preparation , 1997 .

[37]  E. Irene,et al.  In situ real-time studies of nickel silicide phase formation , 2001 .

[38]  J. Benedict,et al.  Precision Ion Milling of Layered, Multi-Element TEM Specimens with High Specimen Preparation Spatial Resolution , 1991 .

[39]  J. Benedict,et al.  A Grinding/Polishing Tool for TEM Sample Preparation , 1987 .

[40]  S. Stemmer,et al.  Characterization of advanced gate stacks for Si CMOS by electron energy-loss spectroscopy in scanning transmission electron microscopy , 2005 .

[41]  M. Mackenzie,et al.  Investigating physical and chemical changes in high- k gate stacks using nanoanalytical electron microscopy , 2005 .

[42]  David C. Joy,et al.  Principles of Analytical Electron Microscopy , 1986, Springer US.

[43]  Joachim Mayer,et al.  TEM Sample Preparation and FIB-Induced Damage , 2007 .

[44]  J. Robertson.  Band offsets of high dielectric constant gate oxides on silicon , 2002 .

[45]  D. Muller,et al.  The electronic structure at the atomic scale of ultrathin gate oxides , 1999, Nature.

[46]  A. Ourmazd,et al.  Two-Dimensional Mapping of pn Junctions by Electron Holography , 2000 .

[47]  E. Luckowski,et al.  Optimization of Hafnium Zirconate (HfZrOx) Gate Dielectric for Device Performance and Reliability , 2006 .

[48]  Y. Sugimoto,et al.  Reduction of induced damage in GaAs processed by Ga+ focused‐ion‐beam‐assisted Cl2 etching , 1990 .

[49]  M. Raymond,et al.  Impact of titanium addition on film characteristics of HfO2 gate dielectrics deposited by atomic layer deposition , 2005 .