Heterogeneous electrolyte (YSZ–Al2O3) based direct oxidation solid oxide fuel cell

[1]  T. Reitz,et al.  An Aging Study of Solid Oxide Fuel Cells for Intermediate Temperature Operation , 2007 .

[2]  T. Reitz,et al.  Characterization of electrolyte–electrode interlayers in thin film solid oxide fuel cells , 2006 .

[3]  Joykumar S. Thokchom,et al.  Ionic conduction through heterogeneous solids: Delineation of the blocking and space charge effects , 2006 .

[4]  J. Vohs,et al.  Influence of composition and Cu impregnation method on the performance of Cu/CeO2/YSZ SOFC anodes , 2006 .

[5]  Christina H. Chen,et al.  Electrical conductivity enhancement in heterogeneously doped scandia-stabilized zirconia , 2005 .

[6]  Christina H. Chen,et al.  Electrical properties of heterogeneously doped yttria stabilized zirconia , 2005 .

[7]  W. L. Worrell,et al.  Development of Intermediate-Temperature Solid Oxide Fuel Cells for Direct Utilization of Hydrocarbon Fuels , 2004 .

[8]  C. Xia.  Microstructures, conductivities, and electrochemical properties of Ce0.9Gd0.1O2 and GDC–Ni anodes for low-temperature SOFCs , 2002 .

[9]  Y. Matsuzaki,et al.  Electrochemical properties of reduced-temperature SOFCs with mixed ionic-electronic conductors in electrodes and/or interlayers , 2002 .

[10]  J. Vohs,et al.  An Examination of Lanthanide Additives on the Performance of Cu-YSZ Cermet Anodes , 2002 .

[11]  Raymond J. Gorte,et al.  Novel SOFC anodes for the direct electrochemical oxidation of hydrocarbon , 2002 .

[12]  Raymond J. Gorte,et al.  Tape Cast Solid-Oxide Fuel Cells for the Direct Oxidation of Hydrocarbons , 2001 .

[13]  A. J. Feighery,et al.  Effect of alumina additions upon electrical properties of 8 mol.% yttria-stabilised zirconia , 1999 .

[14]  M. Mori,et al.  Cubic-stabilized zirconia and alumina composites as electrolytes in planar type solid oxide fuel cells , 1994 .