Electro Discharge Machining of Ti-Alloy (Ti6Al4V) and 316L Stainless Steel and Optimization of Process Parameters by Grey Relational Analysis (GRA) Method

Increasing demand on micro-product leads to the development of innovative manufacturing process in nonconventional machining process to these micro-scale applications. In the medical field a huge variety of products can be found in prosthesis, surgery devices and tissue engineering, which required the application of the EDM process to manufacture micro cavities. Now-a-days the materials like Ti-alloy (Ti6Al4V) and 316L Stainless Steel are widely used in biomedical fields, which are very difficult to machine. These materials are also used in additive manufacturing process. Here it presents an experimental study of electro-discharge machining (EDM) of titanium alloy (Ti6Al4V) and 316L Stainless Steel. The objective of this work is to study the effect and optimization of machining process parameters like pulse-on-time, discharge current and duty cycle on process performance parameters such as material removal rate (MRR), tool wear rate (TWR) and Radial over cut (ROC). A Taguchi L9 design of experiment (DOE) has been applied and three levels of process parameters have been taken. The optimization method Grey relational analysis (GRA) method was used to optimize the parameters. The Analysis of Variance (ANOVA) also indicated the percentage contribution of machining parameters that influence response performance parameters. By the GRA method it was found that for Ti-alloy the machining parameter duty cycle (DC) has maximum percentage contribution on the output responses followed by discharge current (I p) and pulse on time (T ON). Similarly for 316L Stainless Steel the machining parameter discharge current (I p) has maximum percentage contribution on the output responses followed by pulse-on-time (T ON) and duty cycle (DC).

[1]  Yaojun Lin,et al.  Feasibility study of electrical discharge machining for W/Cu composite , 2009 .

[2]  I. Puertas,et al.  A Study of Optimization of Machining Parameters for Electrical Discharge Machining of Boron Carbide , 2004 .

[3]  David K. Aspinwall,et al.  Workpiece surface modification using electrical discharge machining , 2003 .

[4]  R. Purohit,et al.  Mathematical modeling of electric discharge machining of cast Al-4Cu-6Si alloy-10wt.% SiCp composites , 2007 .

[5]  T. Rajmohan,et al.  Optimization of Machining Parameters in Electrical Discharge Machining (EDM) of 304 Stainless Steel , 2012 .

[6]  Siba Sankar Mahapatra,et al.  Thermal-structural Analysis of Electrical Discharge Machining Process☆ , 2013 .

[7]  P. K. Patowari,et al.  Process Parameter Optimization of Wire EDM on Aluminum and Mild Steel by Using Taguchi Method , 2014 .

[8]  Sanjay Agarwal,et al.  Optimization of Machining Parameters in WEDM of AISI D3 Steel Using Taguchi Technique , 2014 .

[9]  R. Karthikeyan,et al.  Mathematical modelling for electric discharge machining of aluminium–silicon carbide particulate composites , 1999 .

[10]  Surajit Pal,et al.  Comparison of performances of five prospective approaches for the multi-response optimization , 2010 .

[11]  P.Narender Singh,et al.  Electric discharge machining of Al–10%SiCP as-cast metal matrix composites , 2004 .

[12]  M. Dev Anand,et al.  Determination of Electro Discharge Machining Parameters in AISI202 Stainless Steel Using Grey Relational Analysis , 2012 .

[13]  Kamlakar P Rajurkar,et al.  Wire electro-discharge machining of titanium alloy , 2013 .

[14]  Biing-Hwa Yan,et al.  EDM performance of Cr/Cu-based composite electrodes , 2003 .

[15]  T. A. El-Taweel.  Multi-response optimization of EDM with Al–Cu–Si–TiC P/M composite electrode , 2009 .

[16]  S. H. Lee,et al.  Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide , 2001 .

[17]  M. Ghoreishi,et al.  Statistical Modeling and Optimization of Process Parameters in Electro-Discharge Machining of Cobalt-Bonded Tungsten Carbide Composite (WC/6%Co) , 2013 .

[18]  A. Rajadurai,et al.  Effect of SiC and rotation of electrode on electric discharge machining of Al–SiC composite , 2002 .