Performances of UHPC bonded cementitious composite systems containing styrene-butadiene rubber latex in a chloride-rich environment

[1]  Linjun Xie,et al.  Healing of Concrete Cracks by In-Situ Synthesis of Ettringite Induced by Electric Field , 2022, SSRN Electronic Journal.

[2]  Z. Shui,et al.  Development of a rapid hardening ultra-high performance concrete (R-UHPC): From macro properties to micro structure , 2022, Construction and Building Materials.

[3]  B. Hou,et al.  Sulphate Corrosion Mechanism of Ultra-High-Performance Concrete (UHPC) Prepared with Seawater and Sea Sand , 2022, Polymers.

[4]  C. Shi,et al.  Mixture design methods for ultra-high-performance concrete - a review , 2021, Cement and Concrete Composites.

[5]  S. Ruan,et al.  Effects of cyclic seawater exposure on the mechanical performance and chloride penetration of calcium sulfoaluminate concrete , 2021 .

[6]  Hehua Zhu,et al.  Piezoresistive properties of ultra-high-performance fiber-reinforced concrete incorporating few-layer graphene , 2021, Construction and Building Materials.

[7]  C. Qian,et al.  Calculation of Expansion Stresses and Strains in Concrete under Sulfate Crystallization Attack in Dry–Wet Cycles Environments , 2021 .

[8]  Hehua Zhu,et al.  Effect of chloride attack on the bonded concrete system repaired by UHPC , 2021 .

[9]  F. Saeed,et al.  Improvement in compressive strength of Styrene-Butadiene-Rubber (SBR) modified mortars by using powder form and nanoparticles , 2021 .

[10]  Q. Zeng,et al.  In-situ assessment of the water-penetration resistance of polymer modified cement mortars by μ-XCT, SEM and EDS , 2020 .

[11]  Hui Li,et al.  Comparative studies of the effect of ultrahigh-performance concrete and normal concrete as repair materials on interfacial bond properties and microstructure , 2020 .

[12]  M. Daukšys,et al.  Mechanical properties and durability of rubberized and SBR latex modified rubberized concrete , 2020 .

[13]  J. Ju,et al.  Multiscale modelling for the ultra-high performance concrete: From hydration kinetics to macroscopic elastic moduli , 2020 .

[14]  M. Lachemi,et al.  Effect of severe chloride environment on the flexural behaviour of hybrid concrete systems , 2020 .

[15]  Z. Shui,et al.  Feasibility analysis of treating recycled rock dust as an environmentally friendly alternative material in Ultra-High Performance Concrete (UHPC) , 2020 .

[16]  Islam M. Mantawy,et al.  Experimental evaluation of concrete-to-UHPC bond strength with correlation to surface roughness for repair application , 2020 .

[17]  Lianhua Wang,et al.  Interfacial bond properties between normal strength concrete substrate and ultra-high performance concrete as a repair material , 2020 .

[18]  J. Ju,et al.  Reaction-degree-based multi-scale predictions for the effective properties of ultra-high-performance concrete , 2020 .

[19]  A. Arora,et al.  Material design of economical ultra-high performance concrete (UHPC) and evaluation of their properties , 2019, Cement and Concrete Composites.

[20]  Dooyeol Yoo,et al.  High energy absorbent ultra-high-performance concrete with hybrid steel and polyethylene fibers , 2019, Construction and Building Materials.

[21]  Yu Zhang,et al.  Electrochemical impedance spectroscopy characteristics of steel corrosion in seawater sea-sand concrete , 2019, IOP Conference Series: Earth and Environmental Science.

[22]  A. Azizinamini,et al.  Experimental and numerical study on bond strength between conventional concrete and Ultra High-Performance Concrete (UHPC) , 2019, Engineering Structures.

[23]  Fazhou Wang,et al.  The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete , 2019, Cement and Concrete Research.

[24]  Y. Patil,et al.  Strength and transport properties of concrete with styrene butadiene rubber latex modified lightweight aggregate , 2019, Construction and Building Materials.

[25]  M. Lachemi,et al.  Effect of very severe sulfate environment on bonded composite concrete system , 2018, Construction and Building Materials.

[26]  E. Mohseni,et al.  Durability and microstructure properties of SBR-modified concrete containing recycled asphalt pavement , 2018, Construction and Building Materials.

[27]  Y. Bao,et al.  Flexural behaviors of fiber-reinforced polymer fabric reinforced ultra-high-performance concrete panels , 2018, Cement and Concrete Composites.

[28]  C. Shi,et al.  A review on ultra high performance concrete: Part I. Raw materials and mixture design , 2015 .

[29]  J. M. Chimenos,et al.  Magnesium Phosphate Cements formulated with a low-grade MgO by-product: Physico-mechanical and durability aspects , 2015 .

[30]  N. Gucunski,et al.  Evaluation of the mechanical properties of 200 MPa ultra-high-strength concrete at elevated temperatures and residual strength of column , 2015 .

[31]  Hjh Jos Brouwers,et al.  Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses , 2015 .

[32]  M. Ozawa,et al.  Effects of various fibres on high-temperature spalling in high-performance concrete , 2014 .

[33]  Nemkumar Banthia,et al.  A study of some factors affecting bond in cementitious fiber reinforced repairs , 2014 .

[34]  Jianping Chen,et al.  Mechanical performance evaluation of polyester fiber and SBR latex compound-modified cement concrete road overlay material , 2014 .

[35]  Hjh Jos Brouwers,et al.  Mix design and properties assessment of Ultra-High-Performance Fibre Reinforced Concrete (UHPFRC) , 2014 .

[36]  Luc Courard,et al.  Near-to-Surface properties affecting bond strength in concrete repair , 2014 .

[37]  Wei Wang,et al.  Durability of an Ultra High Performance Fiber Reinforced Concrete (UHPFRC) under progressive aging , 2014 .

[38]  Cheng Xiao-qi.  The Effect of Chloride on Concrete under Sulfate Attack , 2014 .

[39]  Weiguo Shen,et al.  Investigation on polymer–rubber aggregate modified porous concrete , 2013 .

[40]  Liu Qingling.  Chloride Binding and Its Effects on Microstructure of Cement-based Materials , 2013 .

[41]  Edwin G. Burdette,et al.  Laboratory evaluation of permeability and strength of polymer-modified pervious concrete , 2010 .

[42]  Jeffrey J. Thomas,et al.  Hydration Kinetics and Microstructure Development of Normal and CaCl2-Accelerated Tricalcium Silicate Pastes , 2009 .

[43]  Masayasu Ohtsu,et al.  Corrosion rate of ordinary and high-performance concrete subjected to chloride attack by AC impedance spectroscopy , 2006 .

[44]  G. Denbeaux,et al.  A soft X-ray microscope investigation into the effects of calcium chloride on tricalcium silicate hydration , 2005 .

[45]  J. A. Rossignolo,et al.  Durability of polymer-modified lightweight aggregate concrete , 2004 .

[46]  Xiong Guang-jing,et al.  Microstructure model of the interfacial zone between fresh and old concrete , 2002 .

[47]  Hota V. S. GangaRao,et al.  Aging of bond between FRP and concrete cubes , 2001 .

[48]  Amnon Katz,et al.  Modeling the effect of high temperature on the bond of FRP reinforcing bars to concrete , 2000 .

[49]  A. S. El-Dieb,et al.  Durability of Styrene-Butadiene latex modified concrete , 1997 .

[50]  Houssam Toutanji,et al.  Durability characteristics of concrete beams externally bonded with FRP composite sheets , 1997 .

[51]  M. Chajes,et al.  Durability of concrete beams externally reinforced with composite fabrics , 1995 .

[52]  N. G. Shrive,et al.  Factors Affecting Bond Between New and Old Concrete , 1988 .

[53]  H. G. Midgley,et al.  THE PENETRATION OF CHLORIDES INTO HARDENED CEMENT PASTES , 1984 .

[54]  M. Ben-Yair.  The effect of chlorides on concrete in hot and arid regions , 1974 .