An expert system for vibration-based surface roughness prediction using firefly algorithm and LSTM network

[1]  Z. Said,et al.  Prediction model of volume average diameter and analysis of atomization characteristics in electrostatic atomization minimum quantity lubrication , 2023, Friction.

[2]  Andrews Athisayam,et al.  Fault feature selection for the identification of compound gear-bearing faults using firefly algorithm , 2023, The International Journal of Advanced Manufacturing Technology.

[3]  Z. Said,et al.  Nanofluids application in machining: a comprehensive review , 2023, The International Journal of Advanced Manufacturing Technology.

[4]  Changhe Li,et al.  Kinematics and improved surface roughness model in milling , 2022, The International Journal of Advanced Manufacturing Technology.

[5]  Z. Said,et al.  Analysis of grain tribology and improved grinding temperature model based on discrete heat source , 2022, Tribology International.

[6]  Andrews Athisayam,et al.  A multi-stage diagnosis method using CEEMD, ABC, and ANN for identifying compound gear-bearing faults , 2022, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[7]  Vivek Kumar,et al.  Prediction of surface roughness in turning using vibration features selected by largest Lyapunov exponent based ICEEMDAN decomposition , 2022, Measurement.

[8]  Z. Said,et al.  Electrostatic atomization minimum quantity lubrication machining: from mechanism to application , 2022, International Journal of Extreme Manufacturing.

[9]  M. F. Zia,et al.  Performance analysis of distance metrics on the exploitation properties and convergence behaviour of the conventional firefly algorithm , 2022, Appl. Soft Comput..

[10]  Hongjia Ren,et al.  A novel discrete firefly algorithm for Bayesian network structure learning , 2022, Knowl. Based Syst..

[11]  Chuanzhen Huang,et al.  Nano-enhanced biolubricant in sustainable manufacturing: From processability to mechanisms , 2022, Friction.

[12]  Fuxin Jiang,et al.  Multi-step-ahead wind speed forecasting based on a hybrid decomposition method and temporal convolutional networks , 2022, Energy.

[13]  N. Lu,et al.  Fault feature extraction method for rotating machinery based on a CEEMDAN-LPP algorithm and synthetic maximum index , 2021, Measurement.

[14]  Masoud Pour,et al.  Prediction of surface roughness of various machining processes by a hybrid algorithm including time series analysis, wavelet transform and multi view embedding , 2021 .

[15]  El Bechir Msaddek,et al.  Surface roughness perfection by CAM interpolations , 2021, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[16]  W. Jianguo,et al.  Extraction of local and global features by a convolutional neural network–long short-term memory network for diagnosing bearing faults , 2021, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[17]  Lin Bo,et al.  A semi-supervised transferable LSTM with feature evaluation for fault diagnosis of rotating machinery , 2021, Applied Intelligence.

[18]  She-hung Wu,et al.  Study on vibration and surface roughness in MQCL turning of stainless steel , 2021 .

[19]  A. Ahmed,et al.  Solar radiation prediction using boosted decision tree regression model: A case study in Malaysia , 2021, Environmental Science and Pollution Research.

[20]  Weicheng Guo,et al.  Prediction of surface roughness based on a hybrid feature selection method and long short-term memory network in grinding , 2021, The International Journal of Advanced Manufacturing Technology.

[21]  S. Chinchanikar,et al.  Evaluation of Cutting Tool Vibration and Surface Roughness in Hard Turning of AISI 52100 Steel: An Experimental and ANN Approach , 2020, Journal of Vibration Engineering & Technologies.

[22]  Wang Zhenya,et al.  Rolling bearing fault diagnosis using generalized refined composite multiscale sample entropy and optimized support vector machine , 2020 .

[23]  Behnam Davoodi,et al.  Modeling and optimizing of cutting force and surface roughness in milling process of Inconel 738 using hybrid ANN and GA , 2020 .

[24]  Milenko Sekulić,et al.  Fuzzy logic and sub-clustering approaches to predict main cutting force in high-pressure jet assisted turning , 2020, J. Intell. Manuf..

[25]  Lida Zhu,et al.  Surface morphology evaluation of multi-angle 2D ultrasonic vibration integrated with nanofluid minimum quantity lubrication grinding , 2020 .

[26]  Souad Larabi Marie-Sainte,et al.  Firefly Algorithm based Feature Selection for Arabic Text Classification , 2020, J. King Saud Univ. Comput. Inf. Sci..

[27]  Subramaniam Shankar,et al.  Tool wear prediction in hard turning of EN8 steel using cutting force and surface roughness with artificial neural network , 2020, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[28]  Che-Lun Hung,et al.  Evaluation of Deep Learning Neural Networks for Surface Roughness Prediction Using Vibration Signal Analysis , 2019, Applied Sciences.

[29]  T. Y. Wu,et al.  Prediction of surface roughness in milling process using vibration signal analysis and artificial neural network , 2019, The International Journal of Advanced Manufacturing Technology.

[30]  Mohamed Elhoseny,et al.  Feature selection based on artificial bee colony and gradient boosting decision tree , 2019, Appl. Soft Comput..

[31]  Diego Cabrera,et al.  Feature ranking for multi-fault diagnosis of rotating machinery by using random forest and KNN , 2018, J. Intell. Fuzzy Syst..

[32]  Mozammel Mia,et al.  Prediction and optimization of surface roughness in minimum quantity coolant lubrication applied turning of high hardness steel , 2018 .

[33]  Nan Xie,et al.  An energy-based modeling and prediction approach for surface roughness in turning , 2018 .

[34]  Qing Zhang,et al.  A two-stage feature selection and intelligent fault diagnosis method for rotating machinery using hybrid filter and wrapper method , 2018, Neurocomputing.

[35]  Somkiat Tangjitsitcharoen,et al.  Monitoring of chip breaking and surface roughness in computer numerical control turning by utilizing wavelet transform of dynamic cutting forces , 2017 .

[36]  Randal S. Olson,et al.  Relief-Based Feature Selection: Introduction and Review , 2017, J. Biomed. Informatics.

[37]  A. Piratelli-Filho,et al.  Effect of mechanical vibration on Ra, Rq, Rz, and Rt roughness parameters , 2017 .

[38]  Ronglei Sun,et al.  A nested-ANN prediction model for surface roughness considering the effects of cutting forces and tool vibrations , 2017 .

[39]  Mozammel Mia,et al.  Prediction of surface roughness in hard turning under high pressure coolant using Artificial Neural Network , 2016 .

[40]  Mikolaj Kuzinovski,et al.  Development of mathematical models for surface roughness parameter prediction in turning depending on the process condition , 2016 .

[41]  Diego Carou,et al.  Analysis of the hard turning of AISI H13 steel with ceramic tools based on tool geometry: surface roughness, tool wear and their relation , 2016 .

[42]  J. Davim,et al.  Analysis of the hard turning of AISI H13 steel with ceramic tools based on tool geometry: surface roughness, tool wear and their relation , 2016, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[43]  Anupam Agrawal,et al.  Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC) , 2015, Appl. Soft Comput..

[44]  Q. Fang,et al.  Effect of grinding wheel spindle vibration on surface roughness and subsurface damage in brittle material grinding , 2015 .

[45]  S. R. Devadasan,et al.  Prediction of surface roughness of end milling operation using genetic algorithm , 2015 .

[46]  R. Kumar,et al.  Prediction of Surface Roughness in Turning of EN 353 Using Response Surface Methodology , 2014, Transactions of the Indian Institute of Metals.

[47]  Xin-She Yang,et al.  Firefly Algorithm: Recent Advances and Applications , 2013, ArXiv.

[48]  Tarek Mabrouki,et al.  On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations , 2013 .

[49]  Pedro Paulo Balestrassi,et al.  Optimization of Radial Basis Function neural network employed for prediction of surface roughness in hard turning process using Taguchi's orthogonal arrays , 2012, Expert Syst. Appl..

[50]  Angsumalin Senjuntichai,et al.  Intelligent Monitoring and Prediction of Surface Roughness in Ball-End Milling Process , 2011 .

[51]  Mehmet Çunkas,et al.  Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method , 2011, Expert Syst. Appl..

[52]  Young Kug Hwang,et al.  Surface roughness and cutting force prediction in MQL and wet turning process of AISI 1045 using design of experiments , 2010 .

[53]  Xin-She Yang,et al.  Firefly algorithm, stochastic test functions and design optimisation , 2010, Int. J. Bio Inspired Comput..

[54]  Habibollah Haron,et al.  Prediction of surface roughness in the end milling machining using Artificial Neural Network , 2010, Expert Syst. Appl..

[55]  Joseph C. Chen,et al.  Development of a fuzzy-nets-based surface roughness prediction system in turning operations , 2007, Comput. Ind. Eng..

[56]  P. V. Rao,et al.  A surface roughness prediction model for hard turning process , 2007 .

[57]  Shuting Lei,et al.  Fuzzy adaptive networks in machining process modeling: surface roughness prediction for turning operations , 2004 .

[58]  Uday S. Dixit,et al.  Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process , 2003 .

[59]  Ossama B. Abouelatta,et al.  Surface roughness prediction based on cutting parameters and tool vibrations in turning operations , 2001 .

[60]  S. Hochreiter,et al.  Long Short-Term Memory , 1997, Neural Computation.

[61]  Jisheng Pan,et al.  Prediction of the surface roughness and material removal rate in chemical mechanical polishing of single-crystal SiC via a back-propagation neural network , 2021 .

[62]  Le Anh Duc,et al.  Online monitoring of surface roughness and grinding wheel wear when grinding Ti-6Al-4V titanium alloy using ANFIS-GPR hybrid algorithm and Taguchi analysis , 2019, Precision Engineering.

[63]  Pramod Kumar Jain,et al.  In-process prediction of surface roughness in turning of Ti–6Al–4V alloy using cutting parameters and vibration signals , 2013 .

[64]  Uday S. Dixit,et al.  A neural-network-based methodology for the prediction of surface roughness in a turning process , 2005 .