External fine particle removal for crystallization processes: introduction and systematic comparison with the temperature cycling-based fines removal

[1]  M. Mazzotti,et al.  Selective Dissolution Process Featuring a Classification Device for the Removal of Fines in Crystallization: Experiments , 2021, Industrial & Engineering Chemistry Research.

[2]  M. Mazzotti,et al.  Model-based design of pressure-driven product removal from stirred suspensions , 2021 .

[3]  Z. Nagy,et al.  Experimental Investigation of an Integrated Crystallization and Wet-Milling System with Temperature Cycling to Control the Size and Aspect Ratio of Needle-Shaped Pharmaceutical Crystals , 2021 .

[4]  Jeffrey D. Ward,et al.  Dimensionless Framework for Seed Recipe Design and Optimal Control of Batch Crystallization , 2021 .

[5]  Dimitrios I. Gerogiorgis,et al.  No More Than Three: Technoeconomic Mixed Integer Nonlinear Programming Optimization of Mixed Suspension, Mixed Product Removal Crystallizer Cascades for Melitracen, an Antidepressant API , 2020 .

[6]  Z. Nagy,et al.  A Novel Robust Digital Design of a Network of Industrial Continuous Cooling Crystallizers of Dextrose Monohydrate: From Laboratory Experiments to Industrial Application , 2020 .

[7]  G. Stefanidis,et al.  High-throughput on demand access of single enantiomers by a continuous flow crystallization process , 2020 .

[8]  Zoltan K. Nagy,et al.  Application of Model-Free and Model-Based Quality-by-Control (QbC) for the Efficient Design of Pharmaceutical Crystallization Processes , 2020, Crystal Growth & Design.

[9]  T. Vetter.  Designing Isothermal Batch Deracemization Processes with Optimal Productivity: 1. Parametric Analysis Using a Population Balance Equation Model , 2020, Crystal Growth & Design.

[10]  H. Qu,et al.  Polymorphic Control and Scale-Up Strategy for Antisolvent Crystallization Using Direct Nucleation Control , 2020 .

[11]  Zoltan K. Nagy,et al.  Model-based analysis and quality-by-design framework for high aspect ratio crystals in crystallizer-wet mill systems using GPU acceleration enabled optimization , 2019, Comput. Chem. Eng..

[12]  Botond Szilágyi,et al.  Experimental implementation of a Quality-by-Control (QbC) framework using a mechanistic PBM-based nonlinear model predictive control involving chord length distribution measurement for the batch cooling crystallization of l-ascorbic acid , 2019, Chemical Engineering Science.

[13]  G. Schembecker,et al.  Enhanced Product Quality Control through Separation of Crystallization Phenomena in a Four-Stage MSMPR Cascade , 2018, Crystal Growth & Design.

[14]  Brahim Benyahia,et al.  The heat transfer characteristics of a mesoscale continuous oscillatory flow crystalliser with smooth periodic constrictions , 2018, International Journal of Heat and Mass Transfer.

[15]  Ivan Andonovic,et al.  Crystal Shape Modification via Cycles of Growth and Dissolution in a Tubular Crystallizer , 2018, Crystal growth & design.

[16]  G. Stefanidis,et al.  Intensified deracemization via rapid microwave-assisted temperature cycling , 2018 .

[17]  Richard Lakerveld,et al.  Process intensification for pharmaceutical crystallization , 2018 .

[18]  R. LeVeque,et al.  Numerical Methods for Conservation Laws: From Analysis to Algorithms , 2017 .

[19]  Leyla Özkan,et al.  Monitoring of Batch Industrial Crystallization with Growth, Nucleation, and Agglomeration. Part 2: Structure Design for State Estimation with Secondary Measurements , 2017, Industrial & engineering chemistry research.

[20]  H. Kramer,et al.  Novel Design Integrating a Microwave Applicator into a Crystallizer for Rapid Temperature Cycling. A Direct Nucleation Control Study , 2017, Crystal growth & design.

[21]  Christopher L. Burcham,et al.  Designing Robust Crystallization Processes in the Presence of Parameter Uncertainty Using Attainable Regions , 2015 .

[22]  Alexander Reinhold,et al.  High dimensional population balances for the growth of faceted crystals: Combining Monte Carlo integral estimates and the method of characteristics , 2015 .

[23]  Richard D. Braatz,et al.  Modification of Crystal Shape through Deep Temperature Cycling , 2014 .

[24]  Zoltan K. Nagy,et al.  Fines removal in a continuous plug flow crystallizer by optimal spatial temperature profiles with controlled dissolution , 2013 .

[25]  J. Ulrich,et al.  Application of ATR-MIR spectroscopy in the pilot plant—Scope and limitations using the example of Paracetamol crystallizations , 2013 .

[26]  Do Yeon Kim,et al.  A novel method for measurement of crystal growth rate , 2013 .

[27]  Marco Mazzotti,et al.  Population Balance Modeling with Size-Dependent Solubility: Ostwald Ripening , 2012 .

[28]  Zoltan K. Nagy,et al.  Real‐time control of a semi‐industrial fed‐batch evaporative crystallizer using different direct optimization strategies , 2011 .

[29]  Zoltan K. Nagy,et al.  Combined Quadrature Method of Moments and Method of Characteristics Approach for Efficient Solution of Population Balance Models for Dynamic Modeling and Crystal Size Distribution Control of Crystallization Processes , 2009 .

[30]  Marco Mazzotti,et al.  Design and Optimization of a Combined Cooling/Antisolvent Crystallization Process , 2009 .

[31]  K. Sundmacher,et al.  On the Prediction of Crystal Shape Distributions in a Steady State Continuous Crystallizer , 2009 .

[32]  Ali N. Saleemi,et al.  The impact of direct nucleation control on crystal size distribution in pharmaceutical crystallization processes , 2009 .

[33]  Richard D. Braatz,et al.  First-principles and direct design approaches for the control of pharmaceutical crystallization , 2005 .

[34]  R. Braatz,et al.  High resolution algorithms for multidimensional population balance equations , 2004 .

[35]  R. D. Vigil,et al.  Quadrature method of moments for aggregation-breakage processes. , 2003, Journal of colloid and interface science.

[36]  J. Rawlings,et al.  Model identification and control of solution crystallization processes: a review , 1993 .

[37]  S. Katz,et al.  Some problems in particle technology: A statistical mechanical formulation , 1964 .

[38]  Zoltan K. Nagy,et al.  Model Based Robust Batch-to-Batch Control of Particle Size and Shape in Pharmaceutical Crystallisation , 2009 .