Modelling and evaluation of building integrated SOFC systems
暂无分享,去创建一个
[1] Kwang Ho Lee,et al. SOFC cogeneration system for building applications, part 2: System configuration and operating condition design , 2009 .
[2] C. Adjiman,et al. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance , 2004 .
[3] Fathollah Ommi,et al. Modelling and Performance Evaluation of Solid Oxide Fuel Cell for Building Integrated Co‐ and Polygeneration , 2010 .
[4] Izaak C. Vinke,et al. Experimental Analysis on Performance and Durability of SOFC Demonstration Unit , 2010 .
[5] I. Dincer,et al. Energy analysis of a trigeneration plant based on solid oxide fuel cell and organic Rankine cycle , 2010 .
[6] Viktor Dorer,et al. Energy and CO2 emissions performance assessment of residential micro-cogeneration systems with dynamic whole-building simulation programs , 2009 .
[7] Ian Beausoleil-Morrison,et al. The calibration of a model for simulating the thermal and electrical performance of a 2.8 kWAC solid-oxide fuel cell micro-cogeneration device , 2009 .
[8] V. Dorer,et al. Evaluation of hydrogen and methane-fuelled solid oxide fuel cell systems for residential applications: System design alternative and parameter study , 2009 .
[9] Robert J. Braun,et al. Evaluation of system configurations for solid oxide fuel cell-based micro-combined heat and power generators in residential applications , 2006 .
[10] F. Hamdullahpur,et al. Performance Evaluation of Different Configurations of Biogas-Fuelled SOFC Micro-CHP Systems for Residential Applications , 2010 .
[11] Ian Paul Knight,et al. Residential Cogeneration Systems: European and Canadian Residential Non-HVAC Electric and DHW Load Profiles For Use in Simulating the Performance of Residential Cogeneration Systems , 2007 .
[12] Lin Qizhao,et al. Thermodynamic analysis of ITSOFC hybrid system for polygenerations , 2010 .
[13] Wei Chen,et al. Analysis of total energy system based on solid oxide fuel cell for combined cooling and power applications , 2010 .