Stabilization using a discrete fuzzy PDC control with PID controllers and pole placement: application to an experimental greenhouse

This paper proposes a control strategy for complex and nonlinear systems, based on a parallel distributed compensation (PDC) controller. A solution is presented to solve a stability problem that arises when dealing with a Takagi-Sugeno discrete system with great numbers of rules. The PDC controller will use a classical controller like a PI, PID, or RST in each rule with a pole placement strategy to avoid causing instability. The fuzzy controller presented combines the multicontrol approach and the performance of the classical controllers to obtain a robust nonlinear control action that can also deal with time-variant systems. The presented method was applied to a small greenhouse to control its inside temperature by variation in ventilation rate inside the process. The results obtained will show the efficiency of the adopted method to control the nonlinear and complex systems.

[1]  Shaojin Wang,et al.  PA—Precision Agriculture: Convective and Ventilation Transfers in Greenhouses, Part 1: the Greenhouse considered as a Perfectly Stirred Tank , 2002 .

[2]  M. Fuchs,et al.  Evaporative cooling of a ventilated greenhouse rose crop , 2006 .

[3]  Robert Babuska,et al.  Perspectives of fuzzy systems and control , 2005, Fuzzy Sets Syst..

[4]  Michio Sugeno,et al.  Fuzzy identification of systems and its applications to modeling and control , 1985, IEEE Transactions on Systems, Man, and Cybernetics.

[5]  Kazuo Tanaka,et al.  An approach to fuzzy control of nonlinear systems: stability and design issues , 1996, IEEE Trans. Fuzzy Syst..

[6]  Faleh A. Al-Sulaiman,et al.  Evaluation of the performance of local fibers in evaporative cooling , 2002 .

[7]  Jing Li,et al.  Robust tracking for high-rise/high-speed elevators , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[8]  J. W. Modestino,et al.  Adaptive Control , 1998 .

[9]  Le Hung Lan,et al.  Stability analysis for a class of Takagi-Sugeno fuzzy control systems with PID controllers , 2007, Int. J. Approx. Reason..

[10]  Frédéric Lafont,et al.  Fuzzy identification of a greenhouse , 2007, Appl. Soft Comput..

[11]  Sing Kiong Nguang,et al.  Static output feedback controller design for fuzzy systems: an ILMI approach , 2006 .

[12]  Robert Babuška,et al.  An overview of fuzzy modeling for control , 1996 .

[13]  Kazuo Tanaka,et al.  Parallel distributed compensation of nonlinear systems by Takagi-Sugeno fuzzy model , 1995, Proceedings of 1995 IEEE International Conference on Fuzzy Systems..

[14]  Niels Ehler,et al.  IntelliGrow: a greenhouse component-based climate control system , 2003, Environ. Model. Softw..

[15]  Sung Kyung Hong,et al.  Stable fuzzy control system design with pole-placement constraint: an LMI approach , 2003, Comput. Ind..

[16]  E. H. Mamdani,et al.  Application of Fuzzy Logic to Approximate Reasoning Using Linguistic Synthesis , 1976, IEEE Transactions on Computers.

[17]  N. Katsoulas,et al.  Influence of greenhouse ventilation regime on the microclimate and energy partitioning of a rose canopy during summer conditions , 2001 .

[18]  Kazuo Tanaka,et al.  T-S fuzzy model with linear rule consequence and PDC controller: a universal framework for nonlinear control systems , 2000, Ninth IEEE International Conference on Fuzzy Systems. FUZZ- IEEE 2000 (Cat. No.00CH37063).

[19]  Kazuo Tanaka,et al.  Stability analysis and design of fuzzy control systems , 1992 .

[20]  C. Liao,et al.  Wind tunnel modeling the system performance of alternative evaporative cooling pads in Taiwan region , 2002 .