Promise and reality of post-lithium-ion batteries with high energy densities
暂无分享,去创建一个
[1] Yury Gogotsi,et al. Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide , 2013, Science.
[2] Doron Aurbach,et al. Structural and Electrochemical Evidence of Layered to Spinel Phase Transformation of Li and Mn Rich Layered Cathode Materials of the Formulae xLi[Li1/3Mn2/3]O2.(1-x)LiMn1/3Ni1/3Co1/3O2 (x = 0.2, 0.4, 0.6) upon Cycling , 2014 .
[3] Ji‐Guang Zhang,et al. Lithium metal anodes for rechargeable batteries , 2014 .
[4] J. Cabana,et al. Beyond Intercalation‐Based Li‐Ion Batteries: The State of the Art and Challenges of Electrode Materials Reacting Through Conversion Reactions , 2010, Advanced materials.
[5] Shinichi Komaba,et al. Research development on sodium-ion batteries. , 2014, Chemical reviews.
[6] Joo-Seong Kim,et al. Controlled Lithium Dendrite Growth by a Synergistic Effect of Multilayered Graphene Coating and an Electrolyte Additive , 2015 .
[7] Seung M. Oh,et al. An Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries , 2013, Advanced materials.
[8] Majid Beidaghi,et al. Solving the Capacitive Paradox of 2D MXene using Electrochemical Quartz‐Crystal Admittance and In Situ Electronic Conductance Measurements , 2015 .
[9] Masahiro Tatsumisago,et al. Electrochemical Performance of All-Solid-State Li/S Batteries with Sulfur-Based Composite Electrodes Prepared by Mechanical Milling at High Temperature , 2013 .
[10] Yan Yu,et al. Single-layered ultrasmall nanoplates of MoS2 embedded in carbon nanofibers with excellent electrochemical performance for lithium and sodium storage. , 2014, Angewandte Chemie.
[11] S. Dou,et al. Single Crystalline Co3O4 Nanocrystals Exposed with Different Crystal Planes for Li-O2 Batteries , 2014, Scientific Reports.
[12] H. Ahn,et al. Octahedral tin dioxide nanocrystals as high capacity anode materials for Na-ion batteries. , 2013, Physical chemistry chemical physics : PCCP.
[13] Chung-Sung Tan,et al. Reduction of CO2 concentration in a zinc/air battery by absorption in a rotating packed bed , 2006 .
[14] Hua Ma,et al. Rechargeable Mg Batteries with Graphene‐like MoS2 Cathode and Ultrasmall Mg Nanoparticle Anode , 2011, Advanced materials.
[15] Rana Mohtadi,et al. Magnesium Borohydride: From Hydrogen Storage to Magnesium Battery** , 2012, Angewandte Chemie.
[16] Lei Liu,et al. NaTiO2: a layered anode material for sodium-ion batteries , 2015 .
[17] Marc D. Walter,et al. Monodisperse antimony nanocrystals for high-rate Li-ion and Na-ion battery anodes: nano versus bulk. , 2014, Nano letters.
[18] K. Amine,et al. Electrochemical and thermal characterization of AlF3-coated Li[Ni0.8Co0.15Al0.05]O2 cathode in lithium-ion cells , 2008 .
[19] Masaru Miyayama,et al. Mg Intercalation Properties into V 2 O 5 gel/Carbon Composites under High-Rate Condition , 2003 .
[20] C. W. Lim,et al. Effect of lithium powder size on the performance of lithium-powder/lithium trivanadate secondary batteries shown via impedance analysis , 2014 .
[21] Joseph F. Parker,et al. Wiring zinc in three dimensions re-writes battery performance—dendrite-free cycling , 2014 .
[22] Hongjie Dai,et al. Recent advances in zinc-air batteries. , 2014, Chemical Society reviews.
[23] Yi Cui,et al. Highly reversible open framework nanoscale electrodes for divalent ion batteries. , 2013, Nano letters.
[24] Daniel Sharon,et al. Review—Development of Advanced Rechargeable Batteries: A Continuous Challenge in the Choice of Suitable Electrolyte Solutions , 2015 .
[25] Jaephil Cho,et al. Spinel‐Layered Core‐Shell Cathode Materials for Li‐Ion Batteries , 2011 .
[26] Jou-Hyeon Ahn,et al. Microporous Poly(vinylidene fluoride-co-hexafluoropropylene) Polymer Electrolytes for Lithium/Sulfur Cells , 2006 .
[27] Haegyeom Kim,et al. Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion Batteries , 2014 .
[28] Doron Aurbach,et al. Mg rechargeable batteries: an on-going challenge , 2013 .
[29] Jeff Dahn,et al. Structure and electrochemistry of LixMnyNi1−yO2 , 1992 .
[30] Doron Aurbach,et al. Comparison between Na-Ion and Li-Ion Cells: Understanding the Critical Role of the Cathodes Stability and the Anodes Pretreatment on the Cells Behavior. , 2016, ACS applied materials & interfaces.
[31] Lin Gu,et al. Reversible Storage of Lithium in Silver‐Coated Three‐Dimensional Macroporous Silicon , 2010, Advanced materials.
[32] C. Schlatter,et al. Development of a 100 W rechargeable bipolar zinc/oxygen battery , 1998 .
[33] Li-Jun Wan,et al. Lithium-sulfur batteries: electrochemistry, materials, and prospects. , 2013, Angewandte Chemie.
[34] Shejun Hu,et al. Lithium-sulfur cell with combining carbon nanofibers–sulfur cathode and gel polymer electrolyte , 2012 .
[35] Jun Lu,et al. A nanostructured cathode architecture for low charge overpotential in lithium-oxygen batteries , 2013, Nature Communications.
[36] Donghai Wang,et al. Nitrogen‐Doped Mesoporous Carbon Promoted Chemical Adsorption of Sulfur and Fabrication of High‐Areal‐Capacity Sulfur Cathode with Exceptional Cycling Stability for Lithium‐Sulfur Batteries , 2014 .
[37] Robert Spotnitz,et al. Theoretical evaluation of high-energy lithium metal phosphate cathode materials in Li-ion batteries , 2007 .
[38] Yuhui Chen,et al. Charging a Li-O₂ battery using a redox mediator. , 2013, Nature chemistry.
[39] Makoto Ue,et al. Effect of vinylene carbonate as additive to electrolyte for lithium metal anode , 2004 .
[40] Shu-Lei Chou,et al. Simply mixed commercial red phosphorus and carbon nanotube composite with exceptionally reversible sodium-ion storage. , 2013, Nano letters.
[41] Rana Mohtadi,et al. An Efficient Halogen-Free Electrolyte for Use in Rechargeable Magnesium Batteries. , 2015, Angewandte Chemie.
[42] Daniel Sharon,et al. Oxidation of Dimethyl Sulfoxide Solutions by Electrochemical Reduction of Oxygen , 2013 .
[43] T. Gregory,et al. Nonaqueous Electrochemistry of Magnesium Applications to Energy Storage , 1990 .
[44] Min-Joon Lee,et al. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries. , 2015, Angewandte Chemie.
[45] Feng Zhang,et al. Effects of Mg doping on the electrochemical properties of LiNi0.8Co0.2O2 cathode material , 2008 .
[46] Sang Hyo Lee,et al. Effects of Triacetoxyvinylsilane as SEI Layer Additive on Electrochemical Performance of Lithium Metal Secondary Battery , 2007 .
[47] Jean-Marie Tarascon,et al. Na2Ti3O7: Lowest voltage ever reported oxide insertion electrode for sodium ion batteries , 2011 .
[48] G. L. Henriksen,et al. Aluminum-doped lithium nickel cobalt oxide electrodes for high-power lithium-ion batteries , 2004 .
[49] Daniel P. Abraham,et al. Structural characteristics and electrochemical performance of layered Li[Mn0.5−xCr2xNi0.5−x]O2 cathode materials , 2009 .
[50] Gabriel M. Veith,et al. Germanium as negative electrode material for sodium-ion batteries , 2013 .
[51] M. Armand,et al. Building better batteries , 2008, Nature.
[52] Doron Aurbach,et al. Novel, electrolyte solutions comprising fully inorganic salts with high anodic stability for rechargeable magnesium batteries. , 2014, Chemical communications.
[53] Gabriel M. Veith,et al. Cu2Sb thin films as anode for Na-ion batteries , 2013 .
[54] Myung-Hyun Ryou,et al. Mechanical Surface Modification of Lithium Metal: Towards Improved Li Metal Anode Performance by Directed Li Plating , 2015 .
[55] Christopher M Wolverton,et al. Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries , 2012 .
[56] Zhenan Bao,et al. Stable Li-ion battery anodes by in-situ polymerization of conducting hydrogel to conformally coat silicon nanoparticles , 2013, Nature Communications.
[57] Doron Aurbach,et al. Fluoroethylene carbonate as an important component in organic carbonate electrolyte solutions for lithium sulfur batteries , 2015 .
[58] Hui Wu,et al. A yolk-shell design for stabilized and scalable li-ion battery alloy anodes. , 2012, Nano letters.
[59] Allen G. Oliver,et al. Structure and compatibility of a magnesium electrolyte with a sulphur cathode , 2011, Nature communications.
[60] Gerbrand Ceder,et al. Challenges for Na-ion Negative Electrodes , 2011 .
[61] Doron Aurbach,et al. Structural analysis of electrolyte solutions for rechargeable Mg batteries by stereoscopic means and DFT calculations. , 2011, Journal of the American Chemical Society.
[62] Bruno Scrosati,et al. The Lithium/Air Battery: Still an Emerging System or a Practical Reality? , 2015, Advanced materials.
[63] Xiangyun Song,et al. Polymers with Tailored Electronic Structure for High Capacity Lithium Battery Electrodes , 2011, Advanced materials.
[64] Seoin Back,et al. Improved reversibility in lithium-oxygen battery: Understanding elementary reactions and surface charge engineering of metal alloy catalyst , 2014, Scientific Reports.
[65] J. Goodenough. Challenges for Rechargeable Li Batteries , 2010 .
[66] Raymond R. Unocic,et al. Characterization of sodium ion electrochemical reaction with tin anodes: Experiment and theory , 2013 .
[67] Ning Li,et al. Ultrathin spinel membrane-encapsulated layered lithium-rich cathode material for advanced Li-ion batteries. , 2014, Nano letters.
[68] Baojun Chen,et al. An approach to application for LiNi0.6Co0.2Mn0.2O2 cathode material at high cutoff voltage by TiO2 coating , 2014 .
[69] Nam-Soon Choi,et al. Charge carriers in rechargeable batteries: Na ions vs. Li ions , 2013 .
[70] Mark N. Obrovac,et al. Reversible Insertion of Sodium in Tin , 2012 .
[71] Jeff Dahn,et al. Lithium Insertion in Carbons Containing Nanodispersed Silicon , 1995 .
[72] M. Whittingham,et al. Electrical Energy Storage and Intercalation Chemistry , 1976, Science.
[73] Shin-ichi Nishimura,et al. Electrochemical Mg2+ intercalation into a bimetallic CuFe Prussian blue analog in aqueous electrolytes , 2013 .
[74] P. Bruce,et al. Reactions in the rechargeable lithium-O2 battery with alkyl carbonate electrolytes. , 2011, Journal of the American Chemical Society.
[75] Taek-Soo Kim,et al. Systematic Molecular‐Level Design of Binders Incorporating Meldrum's Acid for Silicon Anodes in Lithium Rechargeable Batteries , 2014, Advanced materials.
[76] G. Jellison,et al. A Stable Thin‐Film Lithium Electrolyte: Lithium Phosphorus Oxynitride , 1997 .
[77] Petr Novák,et al. Insertion Electrode Materials for Rechargeable Lithium Batteries , 1998 .
[78] E. Levi,et al. Prototype systems for rechargeable magnesium batteries , 2000, Nature.
[79] Doron Aurbach,et al. Design of electrolyte solutions for Li and Li-ion batteries: a review , 2004 .
[80] Taek-Soo Kim,et al. Hyperbranched β-cyclodextrin polymer as an effective multidimensional binder for silicon anodes in lithium rechargeable batteries. , 2014, Nano letters.
[81] Taewoo Kim,et al. Superior rechargeability and efficiency of lithium-oxygen batteries: hierarchical air electrode architecture combined with a soluble catalyst. , 2014, Angewandte Chemie.
[82] Ryota Watanabe,et al. All solid-state battery with sulfur electrode and thio-LISICON electrolyte , 2008 .
[83] Tao Zhang,et al. Li∕Polymer Electrolyte∕Water Stable Lithium-Conducting Glass Ceramics Composite for Lithium–Air Secondary Batteries with an Aqueous Electrolyte , 2008 .
[84] Lin Gu,et al. Smaller sulfur molecules promise better lithium-sulfur batteries. , 2012, Journal of the American Chemical Society.
[85] Chong Seung Yoon,et al. Nanostructured high-energy cathode materials for advanced lithium batteries. , 2012, Nature materials.
[86] Yang-Kook Sun,et al. Evaluation of (CF3SO2)2N− (TFSI) Based Electrolyte Solutions for Mg Batteries , 2015 .
[87] Ayyakkannu Manivannan,et al. A Scientific Study of Current Collectors for Mg Batteries in Mg(AlCl2EtBu)2/THF Electrolyte , 2013 .
[88] Linda F. Nazar,et al. Current density dependence of peroxide formation in the Li–O2 battery and its effect on charge , 2013 .
[89] Doron Aurbach,et al. On the Surface Chemistry of LiMO2 Cathode Materials (M = [ MnNi ] and [MnNiCo]): Electrochemical, Spectroscopic, and Calorimetric Studies , 2010 .
[90] Doron Aurbach,et al. A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions , 2002 .
[91] Yi Cui,et al. 25th Anniversary Article: Understanding the Lithiation of Silicon and Other Alloying Anodes for Lithium‐Ion Batteries , 2013, Advanced materials.
[92] Jean-Marie Tarascon,et al. Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.
[93] Laure Monconduit,et al. Better cycling performances of bulk Sb in Na-ion batteries compared to Li-ion systems: an unexpected electrochemical mechanism. , 2012, Journal of the American Chemical Society.
[94] Kyung Yoon Chung,et al. NaCrO2 cathode for high-rate sodium-ion batteries , 2015 .
[95] Jou-Hyeon Ahn,et al. Discharge process of Li/PVdF/S cells at room temperature , 2006 .
[96] P. Hagenmuller,et al. Electrochemical intercalation of sodium in NaxCoO2 bronzes , 1981 .
[97] Seok-Gwang Doo,et al. Silicon carbide-free graphene growth on silicon for lithium-ion battery with high volumetric energy density , 2015, Nature Communications.
[98] Ram A. Sharma,et al. Thermodynamic Properties of the Lithium‐Silicon System , 1976 .
[99] Petr V Prikhodchenko,et al. High-capacity antimony sulphide nanoparticle-decorated graphene composite as anode for sodium-ion batteries , 2013, Nature Communications.
[100] Myung Won Seo,et al. Controlled Prelithiation of Silicon Monoxide for High Performance Lithium-Ion Rechargeable Full Cells. , 2016, Nano letters.
[101] Michael M. Thackeray,et al. Synthesis and Structural Characterization of a Novel Layered Lithium Manganese Oxide, Li0.36Mn0.91O2, and Its Lithiated Derivative, Li1.09Mn0.91O2 , 1993 .
[102] Yuhui Chen,et al. The lithium-oxygen battery with ether-based electrolytes. , 2011, Angewandte Chemie.
[103] Lingyun Liu,et al. A review of blended cathode materials for use in Li-ion batteries , 2014 .
[104] Lynden A Archer,et al. Stable lithium electrodeposition in liquid and nanoporous solid electrolytes. , 2014, Nature materials.
[105] Byungwoo Park,et al. Comparison of Overcharge Behavior of AlPO4-Coated LiCoO2 and LiNi0.8Co0.1Mn0.1 O 2 Cathode Materials in Li-Ion Cells , 2004 .
[106] Bin Liu,et al. Rechargeable Mg-ion batteries based on WSe2 nanowire cathodes. , 2013, ACS nano.
[107] Seok-Gwang Doo,et al. The High Performance of Crystal Water Containing Manganese Birnessite Cathodes for Magnesium Batteries. , 2015, Nano letters.
[108] Doron Aurbach,et al. The effect of a solid electrolyte interphase on the mechanism of operation of lithium–sulfur batteries , 2015 .
[109] K. M. Abraham,et al. A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte , 1979 .
[110] K. Striebel,et al. Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes , 2000 .
[111] Yong Min Lee,et al. Electrospun core-shell fibers for robust silicon nanoparticle-based lithium ion battery anodes. , 2012, Nano letters.
[112] Daniel Sharon,et al. LithiumOxygen Electrochemistry in Non‐Aqueous Solutions , 2015 .
[113] L. Nazar,et al. A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. , 2009, Nature materials.
[114] Guangyuan Zheng,et al. Interconnected hollow carbon nanospheres for stable lithium metal anodes. , 2014, Nature nanotechnology.
[115] Doron Aurbach,et al. Sulfur‐Impregnated Activated Carbon Fiber Cloth as a Binder‐Free Cathode for Rechargeable Li‐S Batteries , 2011, Advanced materials.
[116] Yang Shao-Horn,et al. Evidence of catalyzed oxidation of Li2O2 for rechargeable Li-air battery applications. , 2012, Physical chemistry chemical physics : PCCP.
[117] Jing Li,et al. Sodium Carboxymethyl Cellulose A Potential Binder for Si Negative Electrodes for Li-Ion Batteries , 2007 .
[118] Doron Aurbach,et al. Exceptional electrochemical performance of Si-nanowires in 1,3-dioxolane solutions: a surface chemical investigation. , 2012, Langmuir : the ACS journal of surfaces and colloids.
[119] Jun Liu,et al. Carbon-coated high capacity layered Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathodes , 2010 .
[120] Zhenan Bao,et al. High‐Areal‐Capacity Silicon Electrodes with Low‐Cost Silicon Particles Based on Spatial Control of Self‐Healing Binder , 2015 .
[121] Feng Lin,et al. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries , 2014, Nature Communications.
[122] Adam Heller,et al. Nanocolumnar Germanium Thin Films as a High-Rate Sodium-Ion Battery Anode Material , 2013 .
[123] Peter G Bruce,et al. Alpha-MnO2 nanowires: a catalyst for the O2 electrode in rechargeable lithium batteries. , 2008, Angewandte Chemie.
[124] G. Yushin,et al. A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries , 2011, Science.
[125] Tao Zhang,et al. Superior Performance of a Li–O2 Battery with Metallic RuO2 Hollow Spheres as the Carbon‐Free Cathode , 2015 .
[126] H. DeWet Erasmus,et al. Preparation and Properties of Silicon Monoxide , 1949 .
[127] Gabriel M. Veith,et al. Intrinsic thermodynamic and kinetic properties of Sb electrodes for Li-ion and Na-ion batteries: experiment and theory , 2013 .
[128] Anubhav Jain,et al. Voltage, stability and diffusion barrier differences between sodium-ion and lithium-ion intercalation materials , 2011 .
[129] Dong Jin Lee,et al. A simple composite protective layer coating that enhances the cycling stability of lithium metal batteries , 2015 .
[130] Atsushi Unemoto,et al. Development of bulk-type all-solid-state lithium-sulfur battery using LiBH4 electrolyte , 2014 .
[131] Byung Gon Kim,et al. A Lithium‐Sulfur Battery with a High Areal Energy Density , 2014 .
[132] Bob R. Powell,et al. Erratum: Structural and Electrochemical Evidence of Layered to Spinel Phase Transformation of Li and Mn Rich Layered Cathode Materials of the Formulae xLi[Li1/3Mn2/3]O2·(1-x)LiMn1/3Ni1/3Co1/3O2 (x = 0.2, 0.4, 0.6) upon Cycling [J. Electrochem. Soc., 161, A1534 (2014)] , 2014 .
[133] Mariko Miyachi,et al. Analysis of SiO Anodes for Lithium-Ion Batteries , 2005 .
[134] Yang-Kook Sun,et al. A Mo2C/Carbon Nanotube Composite Cathode for Lithium-Oxygen Batteries with High Energy Efficiency and Long Cycle Life. , 2015, ACS nano.
[135] Tao Zhang,et al. Ru/ITO: a carbon-free cathode for nonaqueous Li-O2 battery. , 2013, Nano letters.
[136] Laure Monconduit,et al. Correction to “Better Cycling Performances of Bulk Sb in Na-Ion Batteries Compared to Li-Ion Systems: An Unexpected Electrochemical Mechanism” , 2013 .
[137] M. Armand,et al. Issues and challenges facing rechargeable lithium batteries , 2001, Nature.
[138] Linda F Nazar,et al. The role of catalysts and peroxide oxidation in lithium-oxygen batteries. , 2013, Angewandte Chemie.
[139] Xiaoling Ma,et al. Effect of AlPO4 coating on the electrochemical properties of LiNi0.8Co0.2 cathode material , 2008 .
[140] Marca M. Doeff,et al. Electrochemical and Physical Properties of Ti-Substituted Layered Nickel Manganese Cobalt Oxide (NMC) Cathode Materials , 2012 .
[141] Yongil Kim,et al. Tin Phosphide as a Promising Anode Material for Na‐Ion Batteries , 2014, Advanced materials.
[142] Seong-In Moon,et al. A new SiO/C anode composition for lithium-ion battery , 2008 .
[143] D. Linden. Handbook Of Batteries , 2001 .
[144] John T. Vaughey,et al. Synthesis, Characterization and Electrochemistry of Lithium Battery Electrodes: xLi2MnO3·(1 − x)LiMn0.333Ni0.333Co0.333O2 (0 ≤ x ≤ 0.7) , 2008 .
[145] Yang-Kook Sun,et al. Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives , 2016 .
[146] Seung M. Oh,et al. Sodium Terephthalate as an Organic Anode Material for Sodium Ion Batteries , 2012, Advanced materials.
[147] Christopher S. Johnson,et al. Intercalation of Sodium Ions into Hollow Iron Oxide Nanoparticles , 2013 .
[148] Taek-Soo Kim,et al. Millipede-inspired structural design principle for high performance polysaccharide binders in silicon anodes , 2015 .
[149] Linda F. Nazar,et al. Understanding the Nature of Absorption/Adsorption in Nanoporous Polysulfide Sorbents for the Li–S Battery , 2012 .
[150] Doron Aurbach,et al. Morphological and Structural Studies of Composite Sulfur Electrodes upon Cycling by HRTEM, AFM and Raman Spectroscopy , 2010 .
[151] Yang-Kook Sun,et al. Understanding the behavior of Li–oxygen cells containing LiI , 2015 .
[152] P. Hagenmuller,et al. A nasicon-type phase as intercalation electrode: NaTi2(PO4)3 , 1987 .
[153] Laure Monconduit,et al. NiP3: a promising negative electrode for Li- and Na-ion batteries , 2014 .
[154] Tao Zhang,et al. Study on lithium/air secondary batteries—Stability of NASICON-type lithium ion conducting glass–ceramics with water , 2009 .
[155] K. Amine,et al. A comparative study on the substitution of divalent, trivalent and tetravalent metal ions in LiNi1−xMxO2 (M = Cu2+, Al3+ and Ti4+) , 2002 .
[156] Lin Gu,et al. Compatible interface design of CoO-based Li-O2 battery cathodes with long-cycling stability , 2015, Scientific Reports.
[157] Zhenan Bao,et al. Self-healing chemistry enables the stable operation of silicon microparticle anodes for high-energy lithium-ion batteries. , 2013, Nature chemistry.
[158] Myung-Hyun Ryou,et al. Excellent Cycle Life of Lithium‐Metal Anodes in Lithium‐Ion Batteries with Mussel‐Inspired Polydopamine‐Coated Separators , 2012 .
[159] Doron Aurbach,et al. On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries , 2009 .
[160] Hui Wu,et al. Designing nanostructured Si anodes for high energy lithium ion batteries , 2012 .
[161] Rachid Yazami,et al. A reversible graphite-lithium negative electrode for electrochemical generators , 1983 .
[162] Xinping Ai,et al. High capacity and rate capability of amorphous phosphorus for sodium ion batteries. , 2013, Angewandte Chemie.
[163] Nobuya Machida,et al. Electrochemical properties of sulfur as cathode materials in a solid-state lithium battery with inorganic solid electrolytes , 2004 .
[164] Doron Aurbach,et al. High performance of thick amorphous columnar monolithic film silicon anodes in ionic liquid electrolytes at elevated temperature , 2014 .
[165] Yuyan Shao,et al. Making Li‐Air Batteries Rechargeable: Material Challenges , 2013 .
[166] Ilias Belharouak,et al. Radially aligned hierarchical columnar structure as a cathode material for high energy density sodium-ion batteries , 2015, Nature Communications.
[167] B. Dunn,et al. Electrical Energy Storage for the Grid: A Battery of Choices , 2011, Science.
[168] Kazuya Okuda,et al. All-solid-state lithium battery with sulfur/carbon composites as positive electrode materials , 2014 .
[169] D. A. Bograchev,et al. Aqueous and nonaqueous lithium-air batteries enabled by water-stable lithium metal electrodes , 2014, Journal of Solid State Electrochemistry.
[170] Stefan A Freunberger,et al. The carbon electrode in nonaqueous Li-O2 cells. , 2013, Journal of the American Chemical Society.
[171] Eun-Hee Kim,et al. Electrochemical Reduction Mechanism of Sulfur Particles Electrically Isolated from Carbon Cathodes of Lithium-Sulfur Cells , 2014 .
[172] H. E. French,et al. THE ELECTROLYSIS OF GRIGNARD SOLUTIONS1 , 1927 .
[173] Byung Gon Kim,et al. Robust cycling of Li-O2 batteries through the synergistic effect of blended electrolytes. , 2013, ChemSusChem.
[174] Daniel Sharon,et al. On the Challenge of Electrolyte Solutions for Li-Air Batteries: Monitoring Oxygen Reduction and Related Reactions in Polyether Solutions by Spectroscopy and EQCM. , 2013, The journal of physical chemistry letters.
[175] Yi Cui,et al. Prelithiated silicon nanowires as an anode for lithium ion batteries. , 2011, ACS nano.
[176] David Starosvetsky,et al. Electrochemical and surface studies of zinc in alkaline solutions containing organic corrosion inhibitors , 2003 .
[177] Kevin W. Eberman,et al. Colossal Reversible Volume Changes in Lithium Alloys , 2001 .
[178] D. M. Dražić,et al. Corrosion of Pure and Amalgamated Zinc in Concentrated Alkali Hydroxide Solutions , 1974 .
[179] Raymond R. Unocic,et al. Mo3Sb7 as a very fast anode material for lithium-ion and sodium-ion batteries , 2013 .
[180] C. Lee,et al. Novel alloys to improve the electrochemical behavior of zinc anodes for zinc/air battery , 2006 .
[181] Jin-Young Son,et al. Crop-derived polysaccharides as binders for high-capacity silicon/graphite-based electrodes in lithium-ion batteries. , 2012, ChemSusChem.
[182] Marshall C. Smart,et al. Electrochemical Behavior of Layered Solid Solution Li2MnO3−LiMO2 (M = Ni, Mn, Co) Li-Ion Cathodes with and without Alumina Coatings , 2011 .
[183] Pedro Lavela,et al. NiCo2O4 Spinel: First Report on a Transition Metal Oxide for the Negative Electrode of Sodium-Ion Batteries , 2002 .
[184] Li Li,et al. Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD , 2013 .
[185] Hao Gong,et al. Na2Ti6O13: a potential anode for grid-storage sodium-ion batteries. , 2013, Chemical communications.
[186] Mietek Jaroniec,et al. AlSb thin films as negative electrodes for Li-ion and Na-ion batteries , 2013 .
[187] Jiwen Feng,et al. A low cost, all-organic Na-ion Battery Based on Polymeric Cathode and Anode , 2013, Scientific Reports.
[188] Byung Gon Kim,et al. Wisdom from the Human Eye: A Synthetic Melanin Radical Scavenger for Improved Cycle Life of Li–O2 Battery , 2014 .
[189] Gabriel M. Veith,et al. The electrochemical reactions of pure indium with Li and Na: Anomalous electrolyte decomposition, benefits of FEC additive, phase transitions and electrode performance , 2014 .
[190] D. Bethune,et al. On the efficacy of electrocatalysis in nonaqueous Li-O2 batteries. , 2011, Journal of the American Chemical Society.
[191] Xugeng Guo,et al. The effects of TiO2 coating on the electrochemical performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material for lithium-ion battery , 2008 .
[192] Shinichi Komaba,et al. P2-type Na(x)[Fe(1/2)Mn(1/2)]O2 made from earth-abundant elements for rechargeable Na batteries. , 2012, Nature materials.
[193] Xiaogang Han,et al. Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition. , 2015, ACS nano.
[194] L. Nazar,et al. Advances in Li–S batteries , 2010 .
[195] Doron Aurbach,et al. Challenges in the development of advanced Li-ion batteries: a review , 2011 .
[196] Rana Mohtadi,et al. Boron Clusters as Highly Stable Magnesium-Battery Electrolytes , 2014, Angewandte Chemie.
[197] Dan Xu,et al. Novel DMSO-based electrolyte for high performance rechargeable Li-O2 batteries. , 2012, Chemical communications.
[198] Jun Liu,et al. Dendrite-free lithium deposition via self-healing electrostatic shield mechanism. , 2013, Journal of the American Chemical Society.
[199] K. M. Abraham,et al. A Polymer Electrolyte‐Based Rechargeable Lithium/Oxygen Battery , 1996 .
[200] A. Mitelman,et al. Progress in Rechargeable Magnesium Battery Technology , 2007 .
[201] G. Fey,et al. Surface treatment of zinc anodes to improve discharge capacity and suppress hydrogen gas evolution , 2008 .
[202] Doron Aurbach,et al. Factors Which Limit the Cycle Life of Rechargeable Lithium (Metal) Batteries , 2000 .
[203] Jaephil Cho,et al. A highly cross-linked polymeric binder for high-performance silicon negative electrodes in lithium ion batteries. , 2012, Angewandte Chemie.
[204] Hyun-Wook Lee,et al. Dry-air-stable lithium silicide–lithium oxide core–shell nanoparticles as high-capacity prelithiation reagents , 2014, Nature Communications.
[205] Jeong Jae Wie,et al. The use of elemental sulfur as an alternative feedstock for polymeric materials. , 2013, Nature chemistry.
[206] Shinichi Komaba,et al. Study on polymer binders for high-capacity SiO negative electrode of Li-Ion batteries , 2011 .
[207] Takuya Mori,et al. High energy density rechargeable magnesium battery using earth-abundant and non-toxic elements , 2014, Scientific Reports.
[208] Jang Wook Choi,et al. Spray drying method for large-scale and high-performance silicon negative electrodes in Li-ion batteries. , 2013, Nano letters.
[209] Ram A. Sharma,et al. Investigation of lithium utilization from a lithium--silicon electrode. [Liâ Si, Liââ Siâ, Liââ Siâ] , 1977 .
[210] Ki-Soo Lee,et al. Structural and Electrochemical Properties of Layered Li [ Ni1 − 2x Co x Mn x ] O2 ( x = 0.1 – 0.3 ) Positive Electrode Materials for Li-Ion Batteries , 2007 .
[211] Doron Aurbach,et al. Amorphous Columnar Silicon Anodes for Advanced High Voltage Lithium Ion Full Cells: Dominant Factors Governing Cycling Performance , 2013 .
[212] Guosong Hong,et al. Advanced zinc-air batteries based on high-performance hybrid electrocatalysts , 2013, Nature Communications.
[213] Hansu Kim,et al. Dual-Size Silicon Nanocrystal-Embedded SiO(x) Nanocomposite as a High-Capacity Lithium Storage Material. , 2015, ACS nano.
[214] Victor E. Brunini,et al. Semi‐Solid Lithium Rechargeable Flow Battery , 2011 .
[215] Yuhui Chen,et al. A stable cathode for the aprotic Li-O2 battery. , 2013, Nature materials.
[216] Fan Zhang,et al. Boron-based electrolyte solutions with wide electrochemical windows for rechargeable magnesium batteries , 2012 .
[217] Ruigang Zhang,et al. α-MnO2 as a cathode material for rechargeable Mg batteries , 2012 .
[218] Zhe Yuan,et al. Hierarchical Free‐Standing Carbon‐Nanotube Paper Electrodes with Ultrahigh Sulfur‐Loading for Lithium–Sulfur Batteries , 2014 .
[219] Linda F. Nazar,et al. A highly active nanostructured metallic oxide cathode for aprotic Li–O2 batteries , 2015 .
[220] P. Bruce,et al. A Reversible and Higher-Rate Li-O2 Battery , 2012, Science.
[221] Robert A. Huggins,et al. Lithium alloy negative electrodes , 1999 .