Revealing Cycling Rate-Dependent Structure Evolution in Ni-Rich Layered Cathode Materials

High-rate cycling of a battery often leads to a compromised performance, such as reduced capacity, rapid voltage decay, and thermal runaway. Although the cycling rate-dependent performance is gener...

[1]  Ji‐Guang Zhang,et al.  High Voltage Operation of Ni‐Rich NMC Cathodes Enabled by Stable Electrode/Electrolyte Interphases , 2018 .

[2]  D. Aurbach,et al.  Pushing the limit of layered transition metal oxide cathodes for high-energy density rechargeable Li ion batteries , 2018 .

[3]  Wangda Li,et al.  Mn versus Al in Layered Oxide Cathodes in Lithium‐Ion Batteries: A Comprehensive Evaluation on Long‐Term Cyclability , 2018 .

[4]  Ya‐Xia Yin,et al.  Na+/vacancy disordering promises high-rate Na-ion batteries , 2018, Science Advances.

[5]  Ya‐Xia Yin,et al.  High‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries , 2018, Advanced materials.

[6]  C. Yoon,et al.  Extending the Battery Life Using an Al-Doped Li[Ni0.76Co0.09Mn0.15]O2 Cathode with Concentration Gradients for Lithium Ion Batteries , 2017 .

[7]  Byung-Beom Lim,et al.  Comparative Study of Ni-Rich Layered Cathodes for Rechargeable Lithium Batteries: Li[Ni0.85Co0.11Al0.04]O2 and Li[Ni0.84Co0.06Mn0.09Al0.01]O2 with Two-Step Full Concentration Gradients , 2016 .

[8]  G. Ceder,et al.  Layered-to-Rock-Salt Transformation in Desodiated NaxCrO2 (x 0.4) , 2016 .

[9]  Yongyao Xia,et al.  Suppressing the Phase Transition of the Layered Ni-Rich Oxide Cathode during High-Voltage Cycling by Introducing Low-Content Li2MnO3. , 2016, ACS applied materials & interfaces.

[10]  Min-Joon Lee,et al.  Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries. , 2015, Angewandte Chemie.

[11]  Xiqian Yu,et al.  Structural changes and thermal stability of charged LiNixMnyCozO₂ cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy. , 2014, ACS applied materials & interfaces.

[12]  Youngsik Kim,et al.  A Novel Surface Treatment Method and New Insight into Discharge Voltage Deterioration for High‐Performance 0.4Li2MnO3–0.6LiNi1/3Co1/3Mn1/3O2 Cathode Materials , 2014 .

[13]  Mark Asta,et al.  Computational and Experimental Investigation of Ti Substitution in Li1(NixMnxCo1-2x-yTiy)O2 for Lithium Ion Batteries. , 2014, The journal of physical chemistry letters.

[14]  Feng Lin,et al.  Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries , 2014, Nature Communications.

[15]  J. Colin,et al.  First evidence of manganese-nickel segregation and densification upon cycling in Li-rich layered oxides for lithium batteries. , 2013, Nano letters.

[16]  Jacob L. Jones,et al.  Correlation Between Oxygen Vacancy, Microstrain, and Cation Distribution in Lithium-Excess Layered Oxides During the First Electrochemical Cycle , 2013 .

[17]  Lijun Wu,et al.  Combining In Situ Synchrotron X‐Ray Diffraction and Absorption Techniques with Transmission Electron Microscopy to Study the Origin of Thermal Instability in Overcharged Cathode Materials for Lithium‐Ion Batteries , 2013 .

[18]  Xiqian Yu,et al.  Correlating Structural Changes and Gas Evolution during the Thermal Decomposition of Charged LixNi0.8Co0.15Al0.05O2 Cathode Materials , 2013 .

[19]  Lijun Wu,et al.  Structural Origin of Overcharge-Induced Thermal Instability of Ni-Containing Layered-Cathodes for High-Energy-Density Lithium Batteries , 2011 .

[20]  K. Zaghib,et al.  Safe and fast-charging Li-ion battery with long shelf life for power applications , 2011 .

[21]  Zhigang Suo,et al.  Fracture of electrodes in lithium-ion batteries caused by fast charging , 2010 .

[22]  Byoungwoo Kang,et al.  Battery materials for ultrafast charging and discharging , 2009, Nature.

[23]  Gerbrand Ceder,et al.  A First-Principles Approach to Studying the Thermal Stability of Oxide Cathode Materials , 2007 .

[24]  Shengbo Zhang.  The effect of the charging protocol on the cycle life of a Li-ion battery , 2006 .

[25]  J. Prakash,et al.  Phase Transitions in Li1 − δ Ni0.5Mn1.5 O 4 during Cycling at 5 V , 2004 .

[26]  Tsutomu Ohzuku,et al.  Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries , 2003 .

[27]  A. Manthiram,et al.  Factors Influencing the Layered to Spinel-like Phase Transition in Layered Oxide Cathodes , 2002 .

[28]  J. Tarascon,et al.  CoO2, the end member of the LixCoO2 solid solution , 1996 .

[29]  J. Dahn,et al.  Electrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2 , 1992 .

[30]  Yang-Kook Sun,et al.  Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives , 2016 .

[31]  T. Kousksou,et al.  Energy storage: Applications and challenges , 2014 .

[32]  Haegyeom Kim,et al.  Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion Batteries , 2014 .

[33]  Xiqian Yu,et al.  Correlating Structural Changes and Gas Evolution during the Thermal Decomposition of Charged Li x Ni 0.8 Co 0.15 Al 0.05 O 2 Cathode , 2013 .

[34]  Wei Zhang,et al.  High Rate Capability of Li(Ni1/3Mn1/3Co1/3)O2 Electrode for Li-Ion Batteries , 2012 .

[35]  V. Boovaragavan,et al.  On the High Rate Capability of LiFePO4 , 2011 .