Effect of surface finishing of a Zr-based bulk metallic glass on its corrosion behaviour

[1]  L. Schultz,et al.  Corrosion of a Zr-based Bulk Metallic Glass with Different Surface Finishing States , 2009, ECS Transactions.

[2]  P. Liaw,et al.  In situ observation of pitting corrosion of the Zr50Cu40Al10 bulk metallic glass , 2009 .

[3]  Jagannath,et al.  Effect of Structural Defects, Surface Irregularities, and Quenched-In Defects on Corrosion of Zr-Based Metallic Glasses , 2009 .

[4]  Jianzhong Jiang,et al.  Effect of microalloying of Nb on corrosion resistance and thermal stability of ZrCu-based bulk metallic glasses , 2009 .

[5]  J. Schroers,et al.  Nanomoulding with amorphous metals , 2009, Nature.

[6]  J. Eckert,et al.  Microstructural inhomogeneities introduced in a Zr-based bulk metallic glass upon low-temperature annealing , 2008 .

[7]  U. Krähenbühl,et al.  Element-specific in situ corrosion behavior of Zr–Cu–Ni–Al–Nb bulk metallic glass in acidic media studied using a novel microcapillary flow injection inductively coupled plasma mass spectrometry technique , 2008 .

[8]  P. Liaw,et al.  A study of the corrosion behaviour of Zr50Cu(40−X)Al10PdX bulk metallic glasses with scanning Auger microanalysis , 2008 .

[9]  Yong Zhang,et al.  Fabrication and characterization of metallic glasses with a specific microstructure for micro-electro-mechanical system applications , 2008 .

[10]  P. De,et al.  Potentiodynamic polarization studies on amorphous Zr46.75Ti8.25Cu7.5Ni10Be27.5, Zr65Cu17.5Ni10Al7.5, Zr67Ni33 and Ti60Ni40 in aqueous HNO3 solutions , 2007 .

[11]  J. Schroers,et al.  Thermoplastic forming of bulk metallic glass—Applications for MEMS and microstructure fabrication , 2007 .

[12]  A. Gebert,et al.  Corrosion and related mechanical properties of bulk metallic glasses , 2007 .

[13]  Parmanand Sharma,et al.  Nano-fabrication with metallic glass—an exotic material for nano-electromechanical systems , 2007, Nanotechnology.

[14]  J. Eckert,et al.  Limited quasicrystal formation in Zr–Ti–Cu–Ni–Al bulk metallic glasses , 2006 .

[15]  L. Schultz,et al.  Pitting corrosion of zirconium-based bulk glass-matrix composites , 2006 .

[16]  A. Gebert,et al.  Characterization of oxide layers on amorphous Zr-based alloys by Auger electron spectroscopy with sputter depth profiling , 2005 .

[17]  Xiaoliang Cheng,et al.  Influence of Surface Polishing on the Electrochemical Behavior of Titanium , 2005 .

[18]  J. Eckert,et al.  "Work-Hardenable" ductile bulk metallic glass. , 2005, Physical review letters.

[19]  M. Morrison,et al.  Cyclic-anodic-polarization studies of a Zr41.2Ti13.8Ni10Cu12.5Be22.5 bulk metallic glass , 2004 .

[20]  J. Eckert,et al.  Pitting corrosion of bulk glass-forming zirconium-based alloys , 2004 .

[21]  M. Marcos,et al.  Influence of the degree of polishing of alloy AA 5083 on its behaviour against localised alkaline corrosion , 2004 .

[22]  M. Ashby,et al.  Bulk metallic glasses: what are they good for? , 2004 .

[23]  Albert J. Shih,et al.  Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass , 2004 .

[24]  A. Inoue,et al.  Formation, corrosion behavior, and mechanical properties of bulk glassy Zr–Al–Co–Nb alloys , 2003 .

[25]  P. Uggowitzer,et al.  Preparation of high aspect ratio surface microstructures out of a Zr-based bulk metallic glass , 2003 .

[26]  J. Eckert,et al.  Electrochemical Reactivity of Zirconium-Based Bulk Metallic Glasses , 2003 .

[27]  William H. Peter,et al.  Localized corrosion behavior of a zirconium-based bulk metallic glass relative to its crystalline state , 2002 .

[28]  J. Eckert,et al.  Corrosion behaviour of Zr-based bulk glass-forming alloys containing Nb or Ti , 2002 .

[29]  J. Eckert,et al.  Effect of hydrogen on Zr65Cu17.5Al7.5Ni10 metallic glass , 2001 .

[30]  Takao Hanawa,et al.  Effects of surface finishing and dissolved oxygen on the polarization behavior of Zr65Al7.5Ni10Cu17.5 amorphous alloy in phosphate buffered solution , 2000 .

[31]  T. Hanawa,et al.  Effect of pH on the polarization behavior of Zr65Al7.5Ni10Cu17.5 amorphous alloy in a phosphate-buffered solution , 2000 .

[32]  A. Inoue,et al.  Corrosion Behavior of Zr-(Nb-)Al-Ni-Cu Glassy Alloys , 2000 .

[33]  A. Mogoda.  Influence of Some Parameters on Passivation of Zirconium and the Stability of the Anodic Oxide Film , 1999 .

[34]  J. Eckert,et al.  Investigations on the electrochemical behaviour of Zr-based bulk metallic glasses , 1999 .

[35]  J. Beddoes,et al.  The influence of surface condition on the localized corrosion of 316L stainless steel orthopaedic implants , 1999, Journal of materials science. Materials in medicine.

[36]  R. Ritchie,et al.  Comparison of the corrosion behavior of a bulk amorphous metal, Zr41.2Ti13.8Cu12.5Ni10Be22.5, with its crystallized form , 1998 .

[37]  L. Schultz,et al.  Electrochemical investigations on the bulk glass forming Zr55Cu30Al10Ni5 alloy , 1997 .

[38]  K. Asami,et al.  An auger electron spectroscopic study of the corrosion behavior of an amorphous Zr40Cu60 alloy , 1997 .

[39]  S. Piazza,et al.  Photoelectrochemical characterization of thin anodic oxide films on zirconium metal , 1996 .

[40]  A. Inoue,et al.  The oxidation of amorphous Zr-base binary alloys in air , 1993 .

[41]  J. Watts,et al.  An Introduction to Surface Analysis by XPS and AES , 1990 .

[42]  L. Schlapbach,et al.  Cu Precipitations at the Surface of Crystalline Cu — Zr Alloys after Annealing in Hydrogen* , 1989 .

[43]  S. Szymura,et al.  Acid corrosion of amorphous and crystalline Cu-Zr alloys , 1988 .

[44]  A. Baiker,et al.  Effect of oxygen and hydrogen on the surface segregation of amorphous and crystalline Zr alloys , 1987 .

[45]  R. Latanision,et al.  The Influence of Structure on the Corrosion of Glassy Copper-Zirconium Alloys , 1983 .

[46]  T. Masumoto,et al.  Corrosion behavior of amorphous and crystalline Cu50Ti50 and Cu50Zr50 alloys , 1978 .

[47]  M. Pourbaix.  Atlas of Electrochemical Equilibria in Aqueous Solutions , 1974 .