Nanobump assembly for plasmonic organic solar cells

We demonstrate novel plasmonic organic solar cells (OSCs) by embedding an easy processible nanobump assembly (NBA) for harnessing more light. The NBA is consisted of precisely size-controlled Ag nanoparticles (NPs) generated by an aerosol process at atmospheric pressure and thermally deposited molybdenum oxide (MoO3) layer which follows the underlying nano structure of NPs. The active layer, spin-casted polymer blend solution, has an undulated structure conformably covering the NBA structure. To find the optimal condition of the NBA structure for enhancing light harvest as well as carrier transfer, we systematically investigate the effect of the size of Ag NPs and the MoO3 coverage on the device performance. It is observed that the photocurrent of device increases as the size of Ag NP increases owing to enhanced plasmonic and scattering effect. In addition, the increased light absorption is effectively transferred to the photocurrent with small carrier losses, when the Ag NPs are fully covered by the MoO3 layer. As a result, the NBA structure consisted of 40 nm Ag NPs enclosed by 20 nm MoO3 layer leads to 18% improvement in the power conversion efficiency compared to the device without the NBA structure. Therefore, the NBA plasmonic structure provides a reliable and efficient light harvesting in a broad range of wavelength, which consequently enhances the performance of organic solar cells.

[1]  A. Malko,et al.  Effect of Plasmonic Au Nanoparticles on Inverted Organic Solar Cell Performance , 2013 .

[2]  F. Chien,et al.  Improving the Light Trapping Efficiency of Plasmonic Polymer Solar Cells through Photon Management , 2012 .

[3]  H. Atwater,et al.  Plasmonics for improved photovoltaic devices. , 2010, Nature materials.

[4]  H. G. Scheibel,et al.  Generation of monodisperse Ag- and NaCl-aerosols with particle diameters between 2 and 300 nm , 1983 .

[5]  Qiaoqiang Gan,et al.  Plasmonic‐Enhanced Organic Photovoltaics: Breaking the 10% Efficiency Barrier , 2013, Advanced materials.

[6]  A. Heeger,et al.  Molecular Doping Enhances Photoconductivity in Polymer Bulk Heterojunction Solar Cells , 2013, Advanced materials.

[7]  Nripan Mathews,et al.  Uncovering loss mechanisms in silver nanoparticle-blended plasmonic organic solar cells , 2013, Nature Communications.

[8]  David R. Smith,et al.  Local Refractive Index Dependence of Plasmon Resonance Spectra from Individual Nanoparticles , 2003 .

[9]  Xing Wang Zhang,et al.  Plasmonic polymer tandem solar cell. , 2011, ACS nano.

[10]  D. Choi,et al.  Efficiency Increase in Flexible Bulk Heterojunction Solar Cells with a Nano‐Patterned Indium Zinc Oxide Anode , 2012 .

[11]  Jin Young Kim,et al.  Multipositional silica-coated silver nanoparticles for high-performance polymer solar cells. , 2013, Nano letters.

[12]  B. de Boer,et al.  Effect of traps on the performance of bulk heterojunction organic solar cells , 2007 .

[13]  B. K. Juluri,et al.  Extinction, Scattering and Absorption efficiencies of single and multilayer nanoparticles , 2010 .

[14]  Alex K.-Y. Jen,et al.  High‐Efficiency Polymer Solar Cells Achieved by Doping Plasmonic Metallic Nanoparticles into Dual Charge Selecting Interfacial Layers to Enhance Light Trapping , 2013 .

[15]  Peter Bienstman,et al.  Plasmonic absorption enhancement in organic solar cells with thin active layers , 2009 .

[16]  Jung-Yong Lee,et al.  Plasmonic Forward Scattering Effect in Organic Solar Cells: A Powerful Optical Engineering Method , 2013, Scientific Reports.

[17]  Lars Samuelson,et al.  Gold Nanoparticles: Production, Reshaping, and Thermal Charging , 1999 .

[18]  Mansoo Choi,et al.  Plasmonic organic solar cells employing nanobump assembly via aerosol-derived nanoparticles. , 2014, ACS nano.