Wear Mechanisms at High Temperatures: Part 2: Temperature Effect on Wear Mechanisms in the Erosion Test

[1]  M. Roy,et al.  Erosive wear of hardfaced Fe-Cr-C alloys at elevated temperature , 2009 .

[2]  E. Badisch,et al.  Wear Mechanisms at High Temperatures. Part 1: Wear Mechanisms of Different Fe-Based Alloys at Elevated Temperatures , 2009 .

[3]  José Divo Bressan,et al.  Influence of hardness on the wear resistance of 17-4 PH stainless steel evaluated by the pin-on-disc testing , 2008 .

[4]  Friedrich Franek,et al.  Behaviour of iron-based hardfacing alloys under abrasion and impact , 2008 .

[5]  Jorge Antonio Sikora,et al.  Abrasion resistance of ductile iron austempered by the two-step process , 2008 .

[6]  A. Modi.  Effects of microstructure and experimental parameters on high stress abrasive wear behaviour of a 0.19wt% C dual phase steel , 2007 .

[7]  S. Buytoz.  Microstructural properties of M7C3 eutectic carbides in a Fe–Cr–C alloy , 2006 .

[8]  Hayrettin Ahlatci,et al.  High temperature abrasive wear behavior of an as-cast ductile iron , 2005 .

[9]  E. Badisch,et al.  Abrasive wear of high speed steels: Influence of abrasive particles and primary carbides on wear resistance , 2003 .

[10]  T. Pal,et al.  Wear behaviour of hardfacing deposits on cast iron , 2003 .

[11]  D. Trabucco,et al.  Oxidative wear of heat-treated steels , 2001 .

[12]  K. Al-Rubaie.  Equivalent hardness concept and two-body abrasion of iron-base alloys , 2000 .

[13]  E. Navara,et al.  Microstructural characterization of high-carbon ferrochromium , 1996 .

[14]  A. Ball,et al.  A review of the performance of engineering materials under prevalent tribological and wear situations in South African industries , 1996 .

[15]  G. L. F. Powell,et al.  The morphology and microtexture of M7C3 carbides in Fe-Cr-C and Fe-Cr-C-Si alloys of near eutectic composition , 1994, Journal of Materials Science.

[16]  A. H. Yegneswaran,et al.  Abrasive Wear Behaviour of an AISI 5132 Steel under Low Stresses , 1994 .

[17]  S. Prasad,et al.  Abrasion-induced microstructural changes during low stress abrasion of a plain carbon (0.5% C) steel , 1991 .

[18]  H. Bhadeshia,et al.  Microstructure and stability of FeCrC hardfacing alloys , 1990 .

[19]  M. S. Rashid.  GM 980X-A Unique High Strength Sheet Steel with Superior Formability , 1976 .

[20]  M. A. Moore.  The relationship between the abrasive wear resistance, hardness and microstructure of ferritic materials , 1974 .

[21]  P. L. Hurricks.  Some metallurgical factors controlling the adhesive and abrasive wear resistance of steels. A review , 1973 .

[22]  J. Larsen-Badse,et al.  Influence of structure on the abrasion resistance of a 1040 steel , 1969 .