Point defects in Sc2O3 thin films by ion beam sputtering.

We show that the concentration of oxygen interstitials trapped in Sc2O3 films by ion beam sputtering from metal targets can be controlled by modifying deposition conditions. We have identified point defects in the form of oxygen interstitials that are present in Sc2O3 films, in significantly high concentrations, i.e., ∼10(18)  cm(-3). These results show a correlation between the increase of oxygen interstitials and the increase in stress and optical absorption in the films. Sc2O3 films with the lowest stress and optical absorption loss at 1 μm wavelength were obtained when using a low oxygen partial pressure and low beam voltage.

[1]  Jorge J. Rocca,et al.  Influence of Process Conditions on the Optical Properties HfO 2 /SiO 2 Thin Films for High Power Laser Coatings , 2007 .

[2]  R. Gordon,et al.  Atomic layer deposition of Sc2O3 for passivating AlGaN/GaN high electron mobility transistor devices , 2012 .

[3]  V. Shapovalov,et al.  Nonisothermal chemical model of reactive sputtering , 2007 .

[4]  V. Kaichev,et al.  Synthesis and properties of dielectric (HfO2)1 − x(Sc2O3)x films , 2013, Inorganic Materials.

[5]  P. Flinn,et al.  Measurement and Interpretation of stress in aluminum-based metallization as a function of thermal history , 1987, IEEE Transactions on Electron Devices.

[6]  Laurent Gallais,et al.  Laser damage resistance of ion-beam sputtered Sc2O3/SiO2 mixture optical coatings. , 2013, Applied optics.

[7]  R. Barklie,et al.  Electron paramagnetic resonance characterization of defects in HfO2 and ZrO2 powders and films , 2009 .

[8]  D Milam,et al.  Scandium oxide coatings for high-power UV laser applications. , 1982, Applied optics.

[9]  Arthur Schweiger,et al.  EasySpin, a comprehensive software package for spectral simulation and analysis in EPR. , 2006, Journal of magnetic resonance.

[10]  Z. Fan,et al.  Effect of substrate temperatures on the optical properties of evaporated Sc2O3 thin films , 2010 .

[11]  Jorge J. Rocca,et al.  What role do defects play in the laser damage behavior of metal oxides? , 2012, Laser Damage.

[12]  Peter Langston,et al.  Influence of process conditions on the optical properties HfO2/SiO2 thin films for high power laser coatings , 2008, SPIE Laser Damage.

[13]  S. Berg,et al.  Fundamental understanding and modeling of reactive sputtering processes , 2005 .

[14]  Carmen S. Menoni,et al.  Study of spontaneous and induced absorption in amorphous Ta2O5 and SiO2 dielectric thin films , 2013 .

[15]  E. Kay,et al.  Effect of energetic neutralized noble gas ions on the structure of ion beam sputtered thin metal films , 1987 .

[16]  A. Shluger,et al.  Vacancy and interstitial defects in hafnia , 2002 .

[17]  Roger Route,et al.  Advances in ion beam sputtered Sc2O3 for optical interference coatings , 2010, Laser Damage.

[18]  Martin M. Fejer,et al.  Photothermal common-path interferometry (PCI): new developments , 2009, LASE.