Full W-band power amplifier/combiner utilizing GaAs technology

This paper reports the first full-band, W-band (75–110 GHz) power amplifier utilizing GaAs MMICs. The MMIC, developed using a commercially available 0.1µm GaAs pHEMT process, demonstrated a small-signal gain of greater than 15 dB with a typical Psat of 14 dBm across W-band. Four of these MMICs were combined using a low-loss, 4-way septum combiner to produce an output power of 19 dBm ±1 dB across the 75 to 110 GHz band.

[1]  Y.C. Chen,et al.  A 95-GHz InP HEMT MMIC amplifier with 427-mW power output , 1998, IEEE Microwave and Guided Wave Letters.

[2]  Y. C. Leong,et al.  65-145 GHz InP MMIC HEMT medium power amplifiers , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[3]  M. Barsky,et al.  35nm InP HEMT for Millimeter and Sub-Millimeter Wave Applications , 2007, 2007 IEEE 19th International Conference on Indium Phosphide & Related Materials.

[4]  Miroslav Micovic,et al.  W-band, 5W solid-state power amplifier/combiner , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[5]  K. C. Hwang,et al.  W-band GaN power amplifier MMICs , 2011, 2011 IEEE MTT-S International Microwave Symposium.

[6]  P. Kangaslahti,et al.  W-Band GaN MMIC with 842 mW output power at 88 GHz , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[7]  Y.C. Chen,et al.  A 427 mW, 20% compact W-band InP HEMT MMIC power amplifier , 1999, 1999 IEEE Radio Frequency Integrated Circuits Symposium (Cat No.99CH37001).