Development of dilute Mg-Zn-Ca-Mn alloy with high performance via extrusion

[1]  J. Nie,et al.  Microstructure and mechanical properties of extruded Mg-1Ca-1Zn-0.6Zr alloy , 2016 .

[2]  Junlong Zhang,et al.  Microstructure, texture and mechanical properties of Mg-3.0Zn-0.2Ca alloys fabricated by extrusion at various temperatures , 2015 .

[3]  M. Zheng,et al.  Development of high-strength, low-cost wrought Mg–2.5 mass% Zn alloy through micro-alloying with Ca and La , 2015 .

[4]  P. Uggowitzer,et al.  Processing and microstructure–property relations of high-strength low-alloy (HSLA) Mg–Zn–Ca alloys , 2015 .

[5]  Yongqiang Wang,et al.  Texture weakening and ductility variation of Mg–2Zn alloy with CA or RE addition , 2015 .

[6]  Sung Hyuk Park,et al.  Influence of Sn addition on the microstructure and mechanical properties of extruded Mg–8Al–2Zn alloy , 2015 .

[7]  T. Ohkubo,et al.  Solute clustering and grain boundary segregation in extruded dilute Mg-Gd alloys , 2014 .

[8]  B. You,et al.  Strengthening mechanisms of indirect-extruded Mg–Sn based alloys at room temperature , 2014 .

[9]  R. Mahmudi,et al.  Impression creep behavior of the extruded Mg–4Zn–0.5Ca and Mg–4Zn–0.5Ca–2RE alloys , 2014 .

[10]  M. Bugnet,et al.  Segregation and clustering of solutes at grain boundaries in Mg–rare earth solid solutions , 2014 .

[11]  J. Jonas,et al.  Effect of Ca Addition on the Intensity of the Rare Earth Texture Component in Extruded Magnesium Alloys , 2014, Metallurgical and Materials Transactions A.

[12]  A. Sachdev,et al.  Effects of extrusion parameters on the microstructure and mechanical properties of Mg–Zn–(Mn)–Ce/Gd alloys , 2014 .

[13]  P. Uggowitzer,et al.  High-Strength Low-Alloy (HSLA) Mg–Zn–Ca Alloys with Excellent Biodegradation Performance , 2014 .

[14]  W. Ding,et al.  Grain growth and texture evolution during annealing in an indirect-extruded Mg–1Gd alloy , 2014 .

[15]  W. Ding,et al.  Excellent mechanical properties of an ultrafine-grained quasicrystalline strengthened magnesium alloy with multi-modal microstructure , 2013 .

[16]  Yan Du,et al.  Microstructures and mechanical properties of as-cast and as-extruded Mg-4.50Zn-1.13Ca (wt%) alloys , 2013 .

[17]  E. Han,et al.  Activation of {10(1)over-bar2} twinning and slip in high ductile Mg-2.0Zn-0.8Gd rolled sheet with non-basal texture during tensile deformation at room temperature , 2013 .

[18]  U. Ramamurty,et al.  Tension–compression asymmetry in an extruded Mg alloy AM30: Temperature and strain rate effects , 2013 .

[19]  K. Oh-ishi,et al.  Extruded Mg–Zn–Ca–Mn alloys with low yield anisotropy , 2012 .

[20]  P. Uggowitzer,et al.  Design considerations for achieving simultaneously high-strength and highly ductile magnesium alloys , 2012 .

[21]  Qing Liu,et al.  Improving tensile and compressive properties of magnesium alloy plates by pre-cold rolling , 2012 .

[22]  S. Kamado,et al.  Development of an extruded Mg–Zn–Ca-based alloy: new insight on the role of Mn addition in precipitation , 2012 .

[23]  Baoping Zhang,et al.  Effects of calcium on texture and mechanical properties of hot-extruded Mg–Zn–Ca alloys , 2012 .

[24]  Baoping Zhang,et al.  Preparation and characterization of a new biomedical Mg–Zn–Ca alloy , 2012 .

[25]  K. Hono,et al.  High-strength extruded Mg–Al–Ca–Mn alloy , 2011 .

[26]  M. Zheng,et al.  Dynamic microstructural changes during hot extrusion and mechanical properties of a Mg–5.0 Zn–0.9 Y–0.16 Zr (wt.%) alloy , 2011 .

[27]  W. Gan,et al.  Effect of Mn addition on microstructure, texture and mechanical properties of Mg–Zn–Ca alloy , 2011 .

[28]  A. Luo,et al.  High-ductility magnesium–zinc–cerium extrusion alloys , 2011 .

[29]  N. Stanford.  The effect of calcium on the texture, microstructure and mechanical properties of extruded Mg–Mn–Ca alloys , 2010 .

[30]  L. Geng,et al.  Enhanced mechanical properties in fine-grained Mg–1.0Zn–0.5Ca alloys prepared by extrusion at different temperatures , 2010 .

[31]  K. Kainer,et al.  Effect of rare earth elements on the microstructure and texture development in magnesium-manganese alloys during extrusion , 2010 .

[32]  C. Esling,et al.  Anisotropy of dynamic behavior of extruded AZ31 magnesium alloy , 2010 .

[33]  K. Hono,et al.  Effect of Zr addition on the mechanical properties of as-extruded Mg–Zn–Ca–Zr alloys , 2010 .

[34]  Kazuhiro Hono,et al.  Age-hardening response of Mg-0.3 at.%Ca alloys with different Zn contents , 2009 .

[35]  S. Kamado,et al.  Fabrication of extraordinary high-strength magnesium alloy by hot extrusion , 2009 .

[36]  D. Yin,et al.  On tension–compression yield asymmetry in an extruded Mg–3Al–1Zn alloy , 2009 .

[37]  P. Uggowitzer,et al.  Design strategy for microalloyed ultra-ductile magnesium alloys , 2009 .

[38]  K. Hono,et al.  Precipitation-hardenable Mg–2.4Zn–0.1Ag–0.1Ca–0.16Zr (at.%) wrought magnesium alloy , 2009 .

[39]  M. Barnett,et al.  The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility , 2008 .

[40]  K. Hono,et al.  A high-strength Mg–Sn–Zn–Al alloy extruded at low temperature , 2008 .

[41]  M. Barnett,et al.  Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys , 2008 .

[42]  M. Pekguleryuz,et al.  The recrystallization and texture of magnesium–zinc–cerium alloys , 2008 .

[43]  D. Letzig,et al.  The influence of calcium and cerium mischmetal on the microstructural evolution of Mg–3Al–1Zn during extrusion and resulting mechanical properties , 2008 .

[44]  K. Maruyama,et al.  The Effects of Yttrium Element on Microstructure and Mechanical Properties of Mg-5 mass%Al-3 mass%Ca Based Alloys Fabricated by Gravity Casting and Extrusion Process , 2008 .

[45]  H. Somekawa,et al.  High strength and fracture toughness balance on the extruded Mg–Ca–Zn alloy , 2007 .

[46]  Peter K. Liaw,et al.  Low-Cycle Fatigue Behavior of an As-Extruded AM50 Magnesium Alloy , 2007 .

[47]  M. Bamberger,et al.  Solidification, solution treatment and age hardening of a Mg–1.6 wt.% Ca–3.2 wt.% Zn alloy , 2006 .

[48]  B. Muddle,et al.  Precipitation-hardened Mg-Ca-Zn alloys with superior creep resistance , 2005 .

[49]  J. Koike,et al.  Geometrical criterion for the activation of prismatic slip in AZ61 Mg alloy sheets deformed at room temperature , 2005 .

[50]  M. Barnett,et al.  Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn , 2004 .

[51]  J. B. Vander Sande,et al.  Second phase formation in melt-spun Mg–Ca–Zn alloys , 2004 .

[52]  B. Muddle,et al.  Precipitation hardening of Mg-Ca(-Zn) alloys , 1997 .

[53]  P. Prangnell,et al.  Tensile-compressive yield asymmetries in high strength wrought magnesium alloys , 1994 .