Bias and imprecision in posture percentile variables estimated from short exposure samples

BackgroundUpper arm postures are believed to be an important risk determinant for musculoskeletal disorder development in the neck and shoulders. The 10th and 90th percentiles of the angular elevation distribution have been reported in many studies as measures of neutral and extreme postural exposures, and variation has been quantified by the 10th-90th percentile range. Further, the 50th percentile is commonly reported as a measure of "average" exposure. These four variables have been estimated using samples of observed or directly measured postures, typically using sampling durations between 5 and 120 min.MethodsThe present study examined the statistical properties of estimated full-shift values of the 10th, 50th and 90th percentile and the 10th-90th percentile range of right upper arm elevation obtained from samples of seven different durations, ranging from 5 to 240 min. The sampling strategies were realized by simulation, using a parent data set of 73 full-shift, continuous inclinometer recordings among hairdressers. For each shift, sampling duration and exposure variable, the mean, standard deviation and sample dispersion limits (2.5% and 97.5%) of all possible sample estimates obtained at one minute intervals were calculated and compared to the true full-shift exposure value.ResultsEstimates of the 10th percentile proved to be upward biased with limited sampling, and those of the 90th percentile and the percentile range, downward biased. The 50th percentile was also slightly upwards biased. For all variables, bias was more severe with shorter sampling durations, and it correlated significantly with the true full-shift value for the 10th and 90th percentiles and the percentile range. As expected, shorter samples led to decreased precision of the estimate; sample standard deviations correlated strongly with true full-shift exposure values.ConclusionsThe documented risk of pronounced bias and low precision of percentile estimates obtained from short posture samples presents a concern in ergonomics research and practice, and suggests that alternative, unbiased exposure variables should be considered if data collection resources are restricted.

[1]  P M Bongers,et al.  Sources of variance in exposure to nonneutral trunk postures in varying work situations. , 1995, Scandinavian journal of work, environment & health.

[2]  B. Rosner,et al.  Measurement error correction in nutritional epidemiology based on individual foods, with application to the relation of diet to breast cancer. , 2001, American journal of epidemiology.

[3]  Eva Bernmark,et al.  Awkward work postures: association with occupational gender segregation. , 2005, American journal of industrial medicine.

[4]  D B Chaffin,et al.  Shoulder disorders and postural stress in automobile assembly work. , 2000, Scandinavian journal of work, environment & health.

[5]  J Winkel,et al.  Ergonomic effects of a management-based rationalization in assembly work - a case study. , 1996, Applied ergonomics.

[6]  W. M. Keyserling,et al.  Back disorders and nonneutral trunk postures of automobile assembly workers. , 1991, Scandinavian journal of work, environment & health.

[7]  Vasilis Z. Marmarelis,et al.  A Practitioner's Guide , 2004 .

[8]  B. Jonsson.  Kinesiology: with special reference to electromyographic kinesiology. , 1978, Electroencephalography and clinical neurophysiology. Supplement.

[9]  R H Westgaard,et al.  Arm and trunk posture during work in relation to shoulder and neck pain and trapezius activity. , 1997, Clinical biomechanics.

[10]  K. Hansen,et al.  Trapezius muscle load as a risk indicator for occupational shoulder-neck complaints , 1993, International archives of occupational and environmental health.

[11]  L. Karlqvist,et al.  Do work technique and musculoskeletal symptoms differ between men and women performing the same type of work tasks? , 2004, Applied ergonomics.

[12]  Panel on Musculoskeletal Disorders.  Musculoskeletal disorders and the workplace , 2013 .

[13]  I. Balogh,et al.  Relation between perceived and measured workload obtained by long-term inclinometry among dentists. , 2009, Applied ergonomics.

[14]  T Finni,et al.  Stretch-reflex mechanical response to varying types of previous muscle activities. , 2002, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[15]  Toshisada Nishida,et al.  Natural history of a tool-using behavior by wild chimpanzees in feeding upon wood-boring ants , 1982 .

[16]  A Burdorf,et al.  Reducing random measurement error in assessing postural load on the back in epidemiologic surveys. , 1995, Scandinavian journal of work, environment & health.

[17]  Kerstina Ohlsson,et al.  Differences in physical workload, psychosocial factors and musculoskeletal disorders between two groups of female hospital cleaners with two diverse organizational models , 2007, International archives of occupational and environmental health.

[18]  W S Marras,et al.  Measuring trunk motions in industry: variability due to task factors, individual differences, and the amount of data collected , 2000, Ergonomics.

[19]  D O Stram,et al.  Calibration of the dietary questionnaire for a multiethnic cohort in Hawaii and Los Angeles. , 2000, American journal of epidemiology.

[20]  Kerstina Ohlsson,et al.  Physical workload on neck and upper limb using two CAD applications. , 2002, Applied ergonomics.

[21]  Nathan B Fethke,et al.  Comparison of biomechanical loading during use of conventional stud welding equipment and an alternate system. , 2011, Applied ergonomics.

[22]  D. Altman,et al.  Measuring agreement in method comparison studies , 1999, Statistical methods in medical research.

[23]  Svend Erik Mathiassen,et al.  Methodological variance associated with normalization of occupational upper trapezius EMG using sub-maximal reference contractions. , 2009, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[24]  P Asterland,et al.  A method for evaluation of manual work using synchronised video recordings and physiological measurements. , 2002, Applied ergonomics.

[25]  Wai Ming To,et al.  A multiple regression model for urban traffic noise in Hong Kong. , 2002, The Journal of the Acoustical Society of America.

[26]  Barbara Silverstein,et al.  Interrater Reliability of Posture Observations , 2009, Hum. Factors.

[27]  Svend Erik Mathiassen,et al.  Upper arm postures and movements in female hairdressers across four full working days. , 2010, The Annals of occupational hygiene.

[28]  Svend Erik Mathiassen,et al.  Accuracy and precision of variance components in occupational posture recordings: a simulation study of different data collection strategies , 2012, BMC Medical Research Methodology.

[29]  Tomas Engström,et al.  Increasing the degree of automation in a production system: Consequences for the physical workload , 2006 .

[30]  S C Darby,et al.  Some aspects of measurement error in explanatory variables for continuous and binary regression models. , 1998, Statistics in medicine.

[31]  Lars Medbo,et al.  A case study of a principally new way of materials kitting an evaluation of time consumption and physical workload , 2002 .

[32]  Victor Paquet,et al.  Reliable exposure assessment strategies for physical ergonomics stressors in construction and other non-routinized work , 2005, Ergonomics.

[33]  R. Westgaard,et al.  Electromyographic evaluation of muscular work pattern as a predictor of trapezius myalgia. , 1993, Scandinavian journal of work, environment & health.

[34]  Leif Nilsson,et al.  Optimizing occupational exposure measurement strategies when estimating the log-scale arithmetic mean value--an example from the reinforced plastics industry. , 2006, The Annals of occupational hygiene.

[35]  H Kromhout,et al.  Individual-based and group-based occupational exposure assessment: some equations to evaluate different strategies. , 1998, The Annals of occupational hygiene.

[36]  Mikael Forsman,et al.  Head movements during two computer work tasks assessed by accelerometry. , 2011, Applied ergonomics.

[37]  James Morrison,et al.  How Long Is Long Enough? Evaluating Sampling Durations for Low Back EMG Assessment , 2008, Journal of occupational and environmental hygiene.

[38]  J P Bonde,et al.  Work related shoulder disorders: quantitative exposure-response relations with reference to arm posture , 2004, Occupational and Environmental Medicine.

[39]  J P Bonde,et al.  Task based exposure assessment in ergonomic epidemiology: a study of upper arm elevation in the jobs of machinists, car mechanics, and house painters , 2004, Occupational and Environmental Medicine.

[40]  Alex Burdorf,et al.  Equal task, equal exposure? Are men and women with the same tasks equally exposed to awkward working postures? , 2009, Ergonomics.

[41]  Svend Erik Mathiassen,et al.  Observer reliability of industrial activity analysis based on video recordings , 2006 .

[42]  Svend Erik Mathiassen,et al.  Systematic evaluation of observational methods assessing biomechanical exposures at work. , 2010, Scandinavian journal of work, environment & health.

[43]  Svend Erik Mathiassen,et al.  Changes in physical workload with implementation of mouse-based information technology in air traffic control , 2006 .

[44]  A Burdorf,et al.  Group-based measurement strategies in exposure assessment explored by bootstrapping. , 2001, Scandinavian journal of work, environment & health.

[45]  W M Keyserling.  Postural analysis of the trunk and shoulders in simulated real time. , 1986, Ergonomics.

[46]  E P Takala,et al.  Effects of changes in work methods on musculoskeletal load. An intervention study in the trailer assembly. , 1997, Applied ergonomics.

[47]  Svend Erik Mathiassen,et al.  Variability in mechanical exposure within and between individuals performing a highly constrained industrial work task , 2003, Ergonomics.

[48]  Kaj Bo Veiersted,et al.  Effect of an intervention addressing working technique on the biomechanical load of the neck and shoulders among hairdressers. , 2008, Applied ergonomics.

[49]  P Spielholz,et al.  Two posture analysis approaches and their application in a modified Rapid Upper Limb Assessment evaluation , 2007, Ergonomics.

[50]  L. Kupper,et al.  Individual-based and group-based occupational exposure assessment: some equations to evaluate different strategies. , 1998, The Annals of occupational hygiene.

[51]  Svend Erik Mathiassen,et al.  Theoretical and empirical efficiency of sampling strategies for estimating upper arm elevation. , 2011, The Annals of occupational hygiene.

[52]  B Rosner,et al.  Regression calibration method for correcting measurement-error bias in nutritional epidemiology. , 1997, The American journal of clinical nutrition.

[53]  Svend Erik Mathiassen,et al.  ITKids part II: variation of postures and muscle activity in children using different information and communication technologies. , 2011, Work.

[54]  Svend Erik Mathiassen,et al.  Job enlargement and mechanical exposure variability in cyclic assembly work , 2004, Ergonomics.

[55]  Svend Erik Mathiassen,et al.  An integrated analysis of ergonomics and time consumption in Swedish 'craft-type' car disassembly. , 2005, Applied ergonomics.

[56]  R. Westgaard,et al.  Postural angles as an indicator of postural load and muscular injury in occupational work situations. , 1988, Ergonomics.

[57]  C Gaudart,et al.  Conditions for maintaining ageing operators at work--a case study conducted at an automobile manufacturing plant. , 2000, Applied ergonomics.

[58]  Svend Erik Mathiassen,et al.  Statistical power and measurement allocation in ergonomic intervention studies assessing upper trapezius EMG amplitude. A case study of assembly work. , 2002, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[59]  S M Rappaport,et al.  An investigation of the dependence of exposure variability on the interval between measurements. , 1994, The Annals of occupational hygiene.

[60]  Bente Schibye,et al.  Trunk motion characteristics during different patient handling tasks , 2004 .

[61]  L. Sheppard,et al.  Maximizing accuracy and precision using individual and grouped exposure assessments. , 1996, Scandinavian journal of work, environment & health.

[62]  C Fransson-Hall,et al.  A portable ergonomic observation method (PEO) for computerized on-line recording of postures and manual handling. , 1995, Applied ergonomics.

[63]  N. Fallentin,et al.  Assessment of work postures and movements using a video-based observation method and direct technical measurements. , 2001, Applied ergonomics.

[64]  G. Hansson,et al.  Validity and reliability of triaxial accelerometers for inclinometry in posture analysis , 2001, Medical and Biological Engineering and Computing.

[65]  Kerstina Ohlsson,et al.  Physical workload in various types of work: Part II. Neck, shoulder and upper arm , 2010 .

[66]  Nathan B Fethke,et al.  Bootstrap exploration of the duration of surface electromyography sampling in relation to the precision of exposure estimation. , 2007, Scandinavian journal of work, environment & health.

[67]  S E Mathiassen,et al.  Precision of measurements of physical workload during standardised manual handling. Part II: Inclinometry of head, upper back, neck and upper arms. , 2006, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[68]  Douglas G. Altman,et al.  Statistics with confidence: Confidence intervals and statistical guidelines . , 1990 .

[69]  J. Sluiter,et al.  Criteria document for evaluating the work-relatedness of upper-extremity musculoskeletal disorders. , 2001, Scandinavian journal of work, environment & health.

[70]  L. M. Anderson.  Statistics with Confidence. Confidence Intervals and Statistical Guidelines , 1989 .

[71]  A Kilbom,et al.  Work technique and its consequences for musculoskeletal disorders. , 1987, Ergonomics.

[72]  Svend Erik Mathiassen,et al.  Video-Based Ergonomic Job Analysis : A Practitioner's Guide , 2006 .

[73]  B Jonsson,et al.  Measurement and evaluation of local muscular strain in the shoulder during constrained work. , 1982, Journal of human ergology.

[74]  Laura Punnett,et al.  Work routinization and implications for ergonomic exposure assessment , 2006, Ergonomics.

[75]  G. David.  Ergonomic methods for assessing exposure to risk factors for work-related musculoskeletal disorders. , 2005, Occupational medicine.

[76]  A Aarås,et al.  Postural load during VDU work: a comparison between various work postures. , 1997, Ergonomics.

[77]  L M Straker,et al.  A comparison of posture and muscle activity during tablet computer, desktop computer and paper use by young children , 2008, Ergonomics.

[78]  Svend Erik Mathiassen,et al.  Diversity and variation in biomechanical exposure: what is it, and why would we like to know? , 2006, Applied ergonomics.

[79]  P. Buckle,et al.  Current techniques for assessing physical exposure to work-related musculoskeletal risks, with emphasis on posture-based methods. , 1999, Ergonomics.

[80]  Daniel Imbeau,et al.  Comparison of three computer office workstations offering forearm support: impact on upper limb posture and muscle activation , 2006, Ergonomics.

[81]  L Finsen,et al.  Upper trapezius muscle activity patterns during repetitive manual material handling and work with with a computer mouse. , 1999, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[82]  Svend Erik Mathiassen,et al.  Efficient one-day sampling of mechanical job exposure data--a study based on upper trapezius activity in cleaners and office workers. , 2003, AIHA journal : a journal for the science of occupational and environmental health and safety.

[83]  S. Skerfving,et al.  Quantifying work load in neck, shoulders and wrists in female dentists , 1997, International archives of occupational and environmental health.

[84]  A J van der Beek,et al.  Assessment of mechanical exposure in ergonomic epidemiology. , 1998, Occupational and environmental medicine.

[85]  Svend Erik Mathiassen,et al.  The ability of limited exposure sampling to detect effects of interventions that reduce the occurrence of pronounced trunk inclination. , 2010, Applied ergonomics.

[86]  Monique Lortie,et al.  Observation Procedures Characterizing Occupational Physical Activities: Critical Review , 2000, International journal of occupational safety and ergonomics : JOSE.