Embedded Electromechanical Impedance and Strain Sensors for Health Monitoring of a Concrete Bridge

Piezoelectric lead zirconate titanate (PZT) is one of the piezoelectric smart materials, which has direct and converse piezoelectric effects and can serve as an active electromechanical impedance (EMI) sensor. The design and fabrication processes of EMI sensors embedded into concrete structures are presented briefly. Subsequently, finite element modeling and modal analysis of a continuous rigid frame bridge are implemented by using ANSYS and MIDAS and validated by the field test results. Uppermost, a health monitoring technique by employing the embedded EMI and strain sensors is proposed in this paper. The technique is not based on any physical model and is sensitive to incipient structural changes for its high frequency characteristics. A practical study on health monitoring of the continuous rigid frame bridge is implemented based on the EMI and strain signatures. In this study, some EMI and strain sensors are embedded into the box-sectional girders. The electrical admittances of distributed EMI active sensors and the strains of concrete are measured when the bridge is under construction or in operation. Based on the electrical admittance and strain measurements, the health statuses of the continuous rigid frame bridge are monitored and evaluated successfully in the construction and operation stages using a root-mean-square deviation (RMSD) index.

[1]  Sung Woo Shin,et al.  Application of electro-mechanical impedance sensing technique for online monitoring of strength development in concrete using smart PZT patches , 2009 .

[2]  Hongping Zhu,et al.  Embedded 3D electromechanical impedance model for strength monitoring of concrete using a PZT transducer , 2014 .

[3]  C. Liang,et al.  Coupled Electro-Mechanical Analysis of Adaptive Material Systems-Determination of the Actuator Power Consumption and System Energy Transfer , 1997 .

[4]  Hongping Zhu,et al.  Monitoring of the strength gain of concrete using embedded PZT impedance transducer , 2011 .

[5]  Hyung Jin Lim,et al.  Electromechanical impedance measurement from large structures using a dual piezoelectric transducer , 2013 .

[6]  Hoon Sohn,et al.  Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward , 2003 .

[7]  Hyung-Jo Jung,et al.  Hybrid damage monitoring of steel plate-girder bridge under train-induced excitation by parallel acceleration-impedance approach , 2011 .

[8]  Alan D. Kersey,et al.  Fiber optic sensors in concrete structures: a review , 1996 .

[9]  Suresh Bhalla,et al.  Performance of smart piezoceramic patches in health monitoring of a RC bridge , 2000 .

[10]  Brahim Benmokrane,et al.  Evaluation of fibre optic sensors for structural condition monitoring , 2002 .

[11]  E. Crawley,et al.  Detailed Models of Piezoceramic Actuation of Beams , 1989 .

[12]  C. Liang,et al.  Truss Structure Integrity Identification Using PZT Sensor-Actuator , 1995 .

[13]  Daniel J. Inman,et al.  IMPEDANCE-BASED HEALTH MONITORING OF CIVIL STRUCTURAL COMPONENTS , 2000 .

[14]  Wesley J. Cantwell,et al.  Plastic Optical Fibre Sensors for Structural Health Monitoring: A Review of Recent Progress , 2009, J. Sensors.

[15]  Hongping Zhu,et al.  A Study of Concrete Slab Damage Detection Based on the Electromechanical Impedance Method , 2014, Sensors.

[16]  Simon Laflamme,et al.  Large-scale surface strain gauge for health monitoring of civil structures , 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[17]  Hongping Zhu,et al.  Numerical and experimental studies on damage detection of a concrete beam based on PZT admittances and correlation coefficient , 2013 .

[18]  Gangbing Song,et al.  Recent applications of fiber optic sensors to health monitoring in civil engineering , 2004 .

[19]  Nicholas J. Carino,et al.  Health monitoring of civil infrastructures , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[20]  K. Tseng,et al.  Non-parametric damage detection and characterization using smart piezoceramic material , 2002 .

[21]  Wei Zhang,et al.  Health Monitoring of Rehabilitated Concrete Bridges Using Distributed Optical Fiber Sensing , 2006, Comput. Aided Civ. Infrastructure Eng..

[22]  Jinping Ou,et al.  Structural Health Monitoring in mainland China: Review and Future Trends , 2010 .

[23]  Suresh Bhalla,et al.  High frequency piezoelectric signatures for diagnosis of seismic/blast induced structural damages , 2004 .

[24]  Lei Wang,et al.  Review of Benchmark Studies and Guidelines for Structural Health Monitoring , 2013 .

[25]  Jin-Hak Yi,et al.  Vibration and impedance monitoring for prestress-loss prediction in PSC girder bridges , 2009 .

[26]  Charles R. Farrar,et al.  A summary review of vibration-based damage identification methods , 1998 .