Diazonium modified gold microelectrodes onto polyimide substrates for impedimetric cytokine detection with an integrated Ag/AgCl reference electrode

This paper describes a simple technique for the fabrication of a gold microelectrode array with an integrated Ag/AgCl reference microelectrode based on polyimide (PI) which is a flexible and biocompatible thermoplastic substrate. The investigated fabrication technology was based on soft lithography which involved a combination of replica molding (RM) and patterning of self-assembled monolayers (SAMs), through microcontact printing (μCP). From a fabricated silicon microelectrode mold, an elastomeric stamp of the microelectrodes was replicated in polydimethylsiloxane (PDMS) and inked with octadecanethiol (ODT) for patterning of the gold surface. The non-patterned gold was then removed by selective chemical etching leaving very well defined gold microelectrodes with a high resolution. Finally, the integrated Ag/AgCl reference microelectrode was fabricated by silver electro-deposition onto the gold microelectrode. The developed biosensor was then tested for a medical application by immobilizing both monoclonal antibodies (mAb); anti-human interleukin-10 (IL-10) and anti-human tumor necrosis factor-alpha (TNF-α) onto different working electrodes. Functionalization of the gold microelectrodes was made with carboxyl diazonium through cyclic voltammetry (CV). The multiple detection of the corresponding cytokines was verified by fluorescence, whilst electrochemical impedance spectroscopy (EIS) analysis quantified a detectable IL-10 cytokine concentration from 1 to 15 pg/mL. This confirmed the biorecognition between the anti-human mAb (IL-10 and TNF-α) and of its corresponding cytokine. The obtained results show that the mAb's were efficiently immobilized and the proteins for human IL-10 were detectable at weak concentrations. The electrochemical measurements were applied on the manufactured gold microelectrodes for ∼9 h. This shows a high resistance of the microelectrodes for long-lasting measurements and, therefore, highlights the good adhesion of gold-PI. The results presented here have demonstrated the feasibility of a simple microelectrode fabrication technology with application to a biomedical response.

[1]  Rosa Villa,et al.  New technology for multi-sensor silicon needles for biomedical applications , 2001 .

[2]  P. Tracqui,et al.  Optimization of poly-di-methyl-siloxane (PDMS) substrates for studying cellular adhesion and motility , 2008 .

[3]  Josep Samitier,et al.  Novel all-solid-state copper(II) microelectrode based on a dithiomacrocycle as a neutral carrier , 2006 .

[4]  A. Errachid,et al.  Sodium ion sensitive microelectrode based on a p-tert-butylcalix[4]arene ethyl ester , 2006 .

[5]  P. Hammond,et al.  Chemically nanopatterned surfaces using polyelectrolytes and ultraviolet-cured hard molds. , 2005, Nano letters.

[6]  G. Scoles,et al.  Physisorption and Chemisorption of Alkanethiols and Alkyl Sulfides on Au(111) , 1998 .

[7]  Lufeng Che,et al.  A novel fabrication process of MEMS devices on polyimide flexible substrates , 2008 .

[8]  J. Samitier,et al.  Polymer-based technology platform for robust electrochemical sensing using gold microelectrodes , 2012 .

[9]  R. Villa,et al.  Impedance microprobes for myocardial ischemia monitoring , 2000, 1st Annual International IEEE-EMBS Special Topic Conference on Microtechnologies in Medicine and Biology. Proceedings (Cat. No.00EX451).

[10]  Erwin R. Meinders,et al.  Lithographic patterning of metals on flexible plastic foils , 2009 .

[11]  Y. Chen,et al.  Design and fabrication of a polyimide-based microelectrode array: Application in neural recording and repeatable electrolytic lesion in rat brain , 2009, Journal of Neuroscience Methods.

[12]  Shadi A. Dayeh,et al.  Micromachined infrared bolometers on flexible polyimide substrates , 2005 .

[13]  K. Djupsund,et al.  Flexible polyimide microelectrode array for in vivo recordings and current source density analysis. , 2007, Biosensors & bioelectronics.

[14]  H. Sandberg,et al.  Utilizing roll-to-roll techniques for manufacturing source-drain electrodes for all-polymer transistors , 2005 .

[15]  C. Chiu,et al.  Fabrication of polyimide micro/nano-structures based on contact-transfer and mask-embedded lithography , 2009 .

[16]  S. Watcharinyanon.  Structure of Self-Assembled Monolayers on Gold Studied by NEXAFS and Photoelectron Spectroscopy , 2008 .

[17]  Ronen Polsky,et al.  Electrically addressable diazonium-functionalized antibodies for multianalyte electrochemical sensor applications. , 2008, Biosensors & bioelectronics.

[18]  F. Bessueille,et al.  Impedimetric immunosensor based on SWCNT-COOH modified gold microelectrodes for label-free detection of deep venous thrombosis biomarker. , 2010, Biosensors & bioelectronics.

[19]  Ralph G. Nuzzo,et al.  Fundamental studies of microscopic wetting on organic surfaces. 2. Interaction of secondary adsorbates with chemically textured organic monolayers , 1990 .

[20]  N. Jaffrezic‐Renault,et al.  A highly sensitive biosensor for detecting TNF-alpha cytokine to predict the biocompatibility of transplanted organs , 2011 .

[21]  R. Maeda,et al.  Dynamic mechanical thermal analysis, forming and mold fabrication studies for hot-embossing of a polyimide microfluidic platform , 2008 .

[22]  N. Uriel,et al.  Impact of long term left ventricular assist device therapy on donor allocation in cardiac transplantation. , 2013, The Journal of heart and lung transplantation : the official publication of the International Society for Heart Transplantation.

[23]  George M. Whitesides,et al.  Features of gold having micrometer to centimeter dimensions can be formed through a combination of stamping with an elastomeric stamp and an alkanethiol ‘‘ink’’ followed by chemical etching , 1993 .

[24]  A. Errachid,et al.  Potassium-ion selective solid contact microelectrode based on a novel 1,3-(di-4-oxabutanol)-calix[4]arene-crown-5 neutral carrier , 2006 .

[25]  A. Errachid,et al.  Focused ion beam production of nanoelectrode arrays , 2008 .

[26]  Antoni Ivorra,et al.  Hydrogen-selective microelectrodes based on silicon needles , 2003 .

[27]  X. Zhang,et al.  Terahertz metamaterials on free-standing highly-flexible polyimide substrates , 2008, 0808.0454.

[28]  F. Bessueille,et al.  Electropolymerization of nano-dimensioned polypyrrole micro-ring arrays on gold substrates prepared using submerged micro-contact printing , 2007 .

[29]  Kurt Hingerl,et al.  Diffusion of thiols during microcontact printing with rigid stamps , 2010 .

[30]  Peng Liu,et al.  A Flexible Flow Sensor System and Its Characteristics for Fluid Mechanics Measurements , 2009, Sensors.

[31]  H. Chae,et al.  Direct metallization of gold patterns on polyimide substrate by microcontact printing and selective surface modification , 2008 .

[32]  J. Pinson,et al.  The Electrochemical Reduction of Diazonium Salts on Iron Electrodes. The Formation of Covalently Bonded Organic Layers and Their Effect on Corrosion , 2002 .

[33]  D. Bélanger,et al.  Characterization of the deposition of organic molecules at the surface of gold by the electrochemical reduction of aryldiazonium cations. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[34]  C. Ahn,et al.  Functionalized nano interdigitated electrodes arrays on polymer with integrated microfluidics for direct bio-affinity sensing using impedimetric measurement , 2007 .

[35]  J. Pinson,et al.  Attachment of organic layers to conductive or semiconductive surfaces by reduction of diazonium salts. , 2005, Chemical Society reviews.

[36]  Rosa Villa,et al.  Cancer prognostics by direct detection of p53-antibodies on gold surfaces by impedance measurements. , 2012, Small.

[37]  M. Shikida,et al.  Thermal characterization of micro heater arrays on a polyimide film substrate for fingerprint sensing applications , 2005 .