Dynamics and morphological evolution of a fiber conveyed in a three-dimensional rotor spinning unit: a numerical study

[1]  Sheng Xie,et al.  Airflow, Fiber Dynamic Whipping, and Final Fiber Diameter in Flush Sharp-Die Melt Blowing with Different Air-Slot Widths , 2021, ACS omega.

[2]  Jia-ling Wang,et al.  Comparison of the airflow characteristics and yarn properties between conventional and dual-feed-opening rotor spinning units , 2021, Textile Research Journal.

[3]  Yuzhen Jin,et al.  Analysis of fiber movement and deformation in a rotor unit by experiment , 2021, The Journal of The Textile Institute.

[4]  Yang Liu,et al.  Numerical simulation of fiber conveyance in a confined channel by the immersed boundary-lattice Boltzmann method , 2019, European Journal of Mechanics - B/Fluids.

[5]  Jian Zhou,et al.  A model for the particle-level simulation of multiple flexible fibers moving in a wall-bounded fluid flow , 2018, Journal of Fluids and Structures.

[6]  Jun Wang,et al.  Numerical simulation of three-dimensional airflow in a novel dual-feed rotor spinning box , 2018 .

[7]  Meina Xiao,et al.  Critical rotating speed of rotor cup in an air suction open-end spinning machine , 2017 .

[8]  Yuzhen Jin,et al.  An investigation on the distribution of massive fiber granules in rotor spinning units , 2017 .

[9]  Hongbo Wang,et al.  Numerical Analysis and Comparison of Airflow in Rotors with U and V Groove during Rotor Spinning Process , 2016 .

[10]  M. Crapper,et al.  Numerical and experimental study of horizontal pneumatic transportation of spherical and low-aspect-ratio cylindrical particles , 2016 .

[11]  Jun Wang,et al.  Computational simulation of air flow in the rotor spinning unit , 2016 .

[12]  H. Kadoğlu,et al.  Comparison of Conventional Ring, Mechanical Compact and Pneumatic Compact Yarn Spinning Systems , 2012 .

[13]  Chung-Feng Jeffrey Kuo,et al.  A study of processing parameters in open-end spinning process for organic cotton (Ne 24) , 2012 .

[14]  Zeguang Pei,et al.  Investigation on the Motion of Different Types of Fibers in the Vortex Spinning Nozzle , 2012 .

[15]  Zeguang Pei,et al.  Numerical simulation of fiber motion in the nozzle of Murata vortex spinning machine , 2011 .

[16]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[17]  R. D. Felice,et al.  The voidage function for fluid-particle interaction systems , 1994 .

[18]  Zeguang Pei,et al.  Numerical study on the effect of nozzle pressure and yarn delivery speed on the fiber motion in the nozzle of Murata vortex spinning , 2011 .

[19]  K. Slater,et al.  Particle Motion on the Slide Wall in Rotor Spinning , 1994 .

[20]  C. A. Lawrence,et al.  A Study of the Fibre-transfer-channel Design in Rotor-spinning. Part I: The Fibre Trajectory , 1988 .

[21]  C. A. Lawrence,et al.  A Study of the Fibre-transfer-channel Design in Rotor-spinning. Part II: Optimization of the Transfer-channel Design , 1988 .

[22]  Raymond D. Mindlin,et al.  Compliance of elastic bodies in contact , 1949 .

[23]  H. Hertz.  Ueber die Berührung fester elastischer Körper. , 1882 .