Reliability models for a nonrepairable system with heterogeneous components having a phase-type time-to-failure distribution

This research paper presents practical stochastic models for designing and analyzing the time-dependent reliability of nonrepairable systems. The models are formulated for nonrepairable systems with heterogeneous components having phase-type time-to-failure distributions by a structured continuous time Markov chain (CTMC). The versatility of the phase-type distributions enhances the flexibility and practicality of the systems. By virtue of these benefits, studies in reliability engineering can be more advanced than the previous studies. This study attempts to solve a redundancy allocation problem (RAP) by using these new models. The implications of mixing components, redundancy levels, and redundancy strategies are simultaneously considered to maximize the reliability of a system. An imperfect switching case in a standby redundant system is also considered. Furthermore, the experimental results for a well-known RAP benchmark problem are presented to demonstrate the approximating error of the previous reliability function for a standby redundant system and the usefulness of the current research.

[1]  Vaidyanathan Ramaswami,et al.  Introduction to Matrix Analytic Methods in Stochastic Modeling , 1999, ASA-SIAM Series on Statistics and Applied Mathematics.

[2]  Mahmud Fotuhi-Firuzabad,et al.  Reliability Optimization of Series-Parallels Systems Using PSO Technique , 2008, IC-AI.

[3]  R. Tavakkoli-Moghaddam,et al.  Reliability optimization of series-parallel systems with a choice of redundancy strategies using a genetic algorithm , 2008, Reliab. Eng. Syst. Saf..

[4]  David W. Coit,et al.  System reliability optimization with k-out-of-n subsystems and changing k , 2011, The Proceedings of 2011 9th International Conference on Reliability, Maintainability and Safety.

[5]  R Tavakkoli-Moghaddam,et al.  A REDUNDANCY ALLOCATION PROBLEM WITH THE CHOICE OF REDUNDANCY STRATEGIES BY A MEMETIC ALGORITHM , 2010 .

[6]  Gregory Levitin,et al.  Cold vs. hot standby mission operation cost minimization for 1-out-of-N systems , 2014, Eur. J. Oper. Res..

[7]  Hiroshi Kamada,et al.  Surrogate Constraints Algorithm for Reliability Optimization Problems with Multiple Constraints , 1981, IEEE Transactions on Reliability.

[8]  A. Saidane,et al.  Optimal Reliability Design: Fundamentals and Applications , 2001 .

[9]  David G. Robinson,et al.  An algorithmic approach to increased reliability through standby redundancy , 1989 .

[10]  David W. Coit,et al.  Reliability optimization of series-parallel systems using a genetic algorithm , 1996, IEEE Trans. Reliab..

[11]  Ali Zeinal Hamadani,et al.  Reliability optimization of series-parallel systems with mixed redundancy strategy in subsystems , 2014, Reliab. Eng. Syst. Saf..

[12]  Marcel F. Neuts,et al.  Matrix-geometric solutions in stochastic models - an algorithmic approach , 1982 .

[13]  Peter Buchholz,et al.  A Novel Approach for Phase-Type Fitting with the EM Algorithm , 2006, IEEE Transactions on Dependable and Secure Computing.

[14]  Mangey Ram.  On system reliability approaches: a brief survey , 2013, Int. J. Syst. Assur. Eng. Manag..

[15]  Nam Kee Lee,et al.  System Reliability Allocation and a Computational Algorithm , 1968 .

[16]  A. M. Abouammoh,et al.  Reliability of a k-out-of-n Cold Standby System with Imperfect Switches , 2001 .

[17]  Junlin Xiong,et al.  Cold-standby redundancy allocation problem with degrading components , 2015, Int. J. Gen. Syst..

[18]  Amir Azaron,et al.  Reliability evaluation of multi-component cold-standby redundant systems , 2006, Appl. Math. Comput..

[19]  Steven Li,et al.  Solving the redundancy allocation problem with multiple strategy choices using a new simplified particle swarm optimization , 2015, Reliab. Eng. Syst. Saf..

[20]  Gregory Levitin,et al.  Cold-standby sequencing optimization considering mission cost , 2013, Reliab. Eng. Syst. Saf..

[21]  Lev V. Utkin,et al.  Cold standby systems with imperfect and noninstantaneous switch-over mechanism , 1996 .

[22]  Gregory Levitin,et al.  Minimum Mission Cost Cold-Standby Sequencing in Non-Repairable Multi-Phase Systems , 2014, IEEE Transactions on Reliability.

[23]  Peter Buchholz,et al.  Structured analysis approaches for large Markov chains , 1999 .

[24]  S. Albright,et al.  Evaluation of costs of ordering policies in large machine repair problems , 1984 .

[25]  Seyed Taghi Akhavan Niaki,et al.  Redundancy allocation problem of a system with increasing failure rates of components based on Weibull distribution: A simulation-based optimization approach , 2016, Reliab. Eng. Syst. Saf..

[26]  Seyed Taghi Akhavan Niaki,et al.  An efficient memory-based electromagnetism-like mechanism for the redundancy allocation problem , 2016, Appl. Soft Comput..

[27]  D. Coit.  Cold-standby redundancy optimization for nonrepairable systems , 2001 .

[28]  Way Kuo,et al.  Recent Advances in Optimal Reliability Allocation , 2007, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans.

[29]  Vahid Hajipour,et al.  A knowledge-based archive multi-objective simulated annealing algorithm to optimize series-parallel system with choice of redundancy strategies , 2015, Comput. Ind. Eng..

[30]  Geonwook Jeon,et al.  A Reliability Optimization Problem of System with Mixed Redundancy Strategies , 2012 .

[31]  David W. Coit,et al.  Maximization of System Reliability with a Choice of Redundancy Strategies , 2003 .

[32]  Yuji Nakagawa,et al.  Surrogate Constraints Algorithm for Reliability Optimization Problems with Two Constraints , 1981, IEEE Transactions on Reliability.

[33]  David W. Coit,et al.  A novel strategy for redundant components in reliability--redundancy allocation problems , 2016 .