Computational fluid dynamics and virtual aeroengine modelling

Abstract Use of large-scale computational fluid dynamics (CFD) models in aeroengine design has grown rapidly in recent years as parallel computing hardware has become available. This has reached the point where research aimed at the development of CFD-based ‘virtual engine test cells’ is underway, with considerable debate of the subject within the industrial and research communities. The present article considers and illustrates the state-of-the art and prospects for advances in this field. Limitations to CFD model accuracy, the need for aero-thermo-mechanical analysis through an engine flight cycle, coupling of numerical solutions for solid and fluid domains, and timescales for capability development are considered. While the fidelity of large-scale CFD models will remain limited by turbulence modelling and other issues for the foreseeable future, it is clear that use of multi-scale, multi-physics modelling in engine design will expand considerably. Development of user-friendly, versatile, efficient programs and systems for use in a massively parallel computing environment is considered a key issue.

[1]  P. Spalart.  Strategies for turbulence modelling and simulations , 2000 .

[2]  Paul G Tucker.  Introduction. Computational aerodynamics , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[3]  S. Birch,et al.  Propulsive jets and their acoustics , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[4]  John W. Chew,et al.  CFD developments for turbine blade heat transfer , 1996 .

[5]  Graham Pullan,et al.  Acceleration of a two-dimensional Euler flow solver using commodity graphics hardware , 2007 .

[6]  Kok M. Tham,et al.  Recent developments in gas turbine component temperature prediction methods, using computational fluid dynamics and optimization tools, in conjunction with more conventional finite element analysis techniques , 2004 .

[7]  Abdulnaser I. Sayma,et al.  Whole-annulus aeroelasticity analysis of a 17-bladerow WRF compressor using an unstructured Navier–Stokes solver , 2005 .

[8]  Rémi Manceau,et al.  Current trends in modelling research for turbulent aerodynamic flows , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[9]  Nicholas J. Hills,et al.  Numerical simulation of rim seal flows in axial turbines , 2005, The Aeronautical Journal (1968).

[10]  Zixiang Sun,et al.  LES and RANS Investigations Into Buoyancy-Affected Convection in a Rotating Cavity With a Central Axial Throughflow , 2007 .

[11]  K. Saunders,et al.  The Use of CFD to Generate Heat Transfer Boundary Conditions for a Rotor-Stator Cavity in a Compressor Drum Thermal Model , 2007 .

[12]  Ken Badcock,et al.  High performance computing and computational aerodynamics in the UK , 2007 .

[13]  John W. Chew.  Developments in turbomachinery internal air systems , 2009 .

[14]  John W Chew,et al.  Computational fluid dynamics for turbomachinery internal air systems , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[15]  Yannick Muller.  Secondary Air System Model for Integrated Thermomechanical Analysis of a Jet Engine , 2008 .