Combining reliable performance testing and binder properties to determine preventive measures for alkali-silica reaction

[1]  J. Ideker,et al.  Using electrical resistivity to determine the efficiency of supplementary cementitious materials to prevent alkali-silica reaction in concrete , 2022, Cement and Concrete Composites.

[2]  B. Wigum,et al.  Recommendation of RILEM TC 258-AAA: RILEM AAR-10: determination of binder combinations for non-reactive mix design using concrete prisms–38 °C test method , 2021, Materials and Structures.

[3]  S. Stoffels,et al.  Novel admixtures for mitigation of alkali-silica reaction in concrete , 2021, Cement and Concrete Composites.

[4]  B. Lothenbach,et al.  Effect of Al on the formation and structure of alkali-silica reaction products , 2021, Cement and Concrete Research.

[5]  A. Leemann,et al.  Characterization of amorphous and crystalline ASR products formed in concrete aggregates , 2020, Cement and Concrete Research.

[6]  P. Suraneni,et al.  Linking reactivity test outputs to properties of cementitious pastes made with supplementary cementitious materials , 2020 .

[7]  Charles L. Bérubé,et al.  Validation of complex electrical properties of concrete affected by accelerated alkali-silica reaction , 2020 .

[8]  T. Drimalas,et al.  Divergence between Performance in the Field and Laboratory Test Results for Alkali-Silica Reaction , 2020 .

[9]  K. Scrivener,et al.  Microstructure, crystallinity and composition of alkali-silica reaction products in concrete determined by transmission electron microscopy , 2020, Cement and Concrete Research.

[10]  W. Weiss,et al.  The Ball-on-Three-Ball (B3B) Test – Application to Cement Paste and Mortar , 2020 .

[11]  Eric R. Giannini,et al.  A Modified Chemical Index to Predict Fly Ash Dosage for Mitigating Alkali-Silica Reaction , 2019 .

[12]  J. Weiss,et al.  New insights from reactivity testing of supplementary cementitious materials , 2019, Cement and Concrete Composites.

[13]  O. Isgor,et al.  Investigation of the Reactivity of Fly Ash and Its Effect on Mixture Properties , 2019, ACI Materials Journal.

[14]  B. Münch,et al.  The addition of caesium to concrete with alkali-silica reaction: Implications on product identification and recognition of the reaction sequence , 2019, Cement and Concrete Research.

[15]  Y. Kawabata,et al.  Alkali-Wrapped Concrete Prism Test (AW-CPT) – New Testing Protocol Toward a Performance Test against Alkali-Silica Reaction– , 2018, Journal of Advanced Concrete Technology.

[16]  R. Hooton,et al.  Modifications to ASTM C1293 That Allow Testing of Low-Alkali Binder Systems , 2018, ACI Materials Journal.

[17]  Mustafa Tokyay,et al.  Extension of the chemical index model for estimating Alkali-Silica reaction mitigation efficiency to slags and natural pozzolans , 2018, Construction and Building Materials.

[18]  J. Ideker,et al.  A mechanistic study on mitigation of alkali-silica reaction by fine lightweight aggregates , 2018 .

[19]  A. Leemann.  Raman microscopy of alkali-silica reaction (ASR) products formed in concrete , 2017 .

[20]  T. Mangialardi,et al.  Minimizing alkali leaching in the concrete prism expansion test at 38 °C , 2017 .

[21]  J. Munoz,et al.  Effect of Internal Curing as Mitigation to Minimize Alkali- Silica Reaction Damage , 2017 .

[22]  D. Trejo,et al.  Using X-ray fluorescence to assess the chemical composition and resistivity of simulated cementitious pore solutions , 2017 .

[23]  T. Katayama,et al.  Types of alkali–aggregate reactions and the products formed , 2016 .

[24]  Farshad Rajabipour,et al.  An extended chemical index model to predict the fly ash dosage necessary for mitigating alkali–silica reaction in concrete , 2016 .

[25]  A. Ghahremaninezhad,et al.  Electrical Resistivity Measurement to Study Alkali-Silica-Reaction Cracking in Mortar , 2015 .

[26]  Eric R. Giannini,et al.  Alkali-silica reaction: Current understanding of the reaction mechanisms and the knowledge gaps , 2015 .

[27]  P. Rangaraju,et al.  Miniature Concrete Prism Test: Rapid Test Method for Evaluating Alkali-Silica Reactivity of Aggregates , 2015 .

[28]  Kelsea A. Schumacher,et al.  New Considerations in Predicting Mitigation of Alkali-Silica Reaction Based on Fly Ash Chemistry , 2015 .

[29]  Brykov Alexey,et al.  Efficacy of Aluminum Hydroxides as Inhibitors of Alkali-Silica Reactions , 2013 .

[30]  Michael D.A. Thomas,et al.  Alkali-silica reaction (ASR)-performance testing: Influence of specimen pre-treatment, exposure conditions and prism size on alkali leaching and prism expansion , 2013 .

[31]  Michael D.A. Thomas,et al.  Alkali–silica reaction (ASR)—performance testing: Influence of specimen pre-treatment, exposure conditions and prism size on concrete porosity, moisture state and transport properties , 2013 .

[32]  B. Lothenbach,et al.  Effect of temperature on the hydration of Portland cement blended with siliceous fly ash , 2013 .

[33]  J. Bullard,et al.  Factors that Influence Electrical Resistivity Measurements in Cementitious Systems , 2013 .

[34]  Farshad Rajabipour,et al.  How does fly ash mitigate alkali–silica reaction (ASR) in accelerated mortar bar test (ASTM C1567)? , 2013 .

[35]  Karen L. Scrivener,et al.  The influence of aluminium on the dissolution of amorphous silica and its relation to alkali silica reaction , 2012 .

[36]  Kevin J. Folliard,et al.  Do Current Laboratory Test Methods Accurately Predict Alkali-Silica Reactivity? , 2012 .

[37]  J. Olek,et al.  Effects of Sample Preparation and Interpretation of Thermogravimetric Curves on Calcium Hydroxide in Hydrated Pastes and Mortars , 2012 .

[38]  Michael D. A. Thomas,et al.  The effect of supplementary cementing materials on alkali-silica reaction: A review , 2011 .

[39]  Arezki Tagnit-Hamou,et al.  Use of fine glass as ASR inhibitor in glass aggregate mortars , 2010 .

[40]  Benoit Fournier,et al.  Summary of research on the effect of LiNO3 on alkali–silica reaction in new concrete , 2010 .

[41]  Marc-André Bérubé,et al.  Experimental investigation of the mechanisms by which LiNO3 is effective against ASR , 2010 .

[42]  Patrice Rivard,et al.  Assessing alkali-silica reaction damage to concrete with non-destructive methods: From the lab to the field , 2009 .

[43]  Jason H. Ideker,et al.  TEST METHODS FOR EVALUATING PREVENTIVE MEASURES FOR CONTROLLING EXPANSION DUE TO ALKALI-SILICA REACTION IN CONCRETE 6. Performing Organization Code , 2006 .

[44]  L. Malvar,et al.  Efficiency of Fly Ash in Mitigating Alkali-Silica Reaction Based on Chemical Composition , 2006 .

[45]  Robert Danzer,et al.  The ball on three balls test for strength testing of brittle discs: Part II: analysis of possible errors in the strength determination , 2004 .

[46]  Robert Danzer,et al.  The ball on three balls test for strength testing of brittle discs: stress distribution in the disc , 2002 .

[47]  F. Glasser,et al.  Alkali binding in cement pastes: Part I. The C-S-H phase , 1999 .