Accurate Modeling and Performance Analysis of Synchronous Reluctance Motor Considering Amorphous Alloy Properties

In order to analyze the torque performance accurately, a new analytical calculation model of the high-speed Synchronous Reluctance Motor (SynRM) with the amorphous alloy core was proposed in this paper. The local effect of the amorphous alloy core on the electromagnetic properties is considered in this paper. For the proposed model, the equivalent relative permeability of the stator tooth, rotor and the air gap will be considered. So, the proposed model can be used forf motor design and optimization. Finally, the air-gap flux density and torque performance are theoretically analyzed and simulated in 4 poles symmetric structure. And there is a good consistence between the theoretical and simulation result.

[1]  Shiyou Yang,et al.  Stability of Properties on Magnetic Ribbon and Cores With Domestic Fe-Based Amorphous Alloy for HTS AMDT , 2019, IEEE Transactions on Applied Superconductivity.

[2]  F. Chai,et al.  Application of Amorphous Cores to DC-excited Flux-modulated Motors Used for Electric Vehicles , 2018, 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC).

[3]  Č. Ondrůšek,et al.  An Improved Nonlinear Analytical Model of the PM -Assisted Synchronous Reluctance Motor Focused on Torque Behavior Accuracy , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).

[4]  Nicola Bianchi,et al.  Synchronous Reluctance Motor Iron Losses: Analytical Model and Optimization , 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE).

[5]  Dong-Hoon Jung,et al.  A Study on the Synchronous Reluctance Motor Design for High Torque by Using RSM , 2018, IEEE Transactions on Magnetics.

[6]  Huangqiu Zhu,et al.  Torque Ripple Minimization for Bearingless Synchronous Reluctance Motor , 2018, IEEE Transactions on Applied Superconductivity.

[7]  Chris Gerada,et al.  Design Optimization of a High-Speed Synchronous Reluctance Machine , 2018, IEEE Transactions on Industry Applications.

[8]  Alireza Siadatan,et al.  Compare motors of Toyota Prius and synchronous reluctance for using in electric vehicle and hybrid electric vehicle , 2017, 2017 IEEE Electrical Power and Energy Conference (EPEC).

[9]  Feng Chai,et al.  Theoretical analysis of torque performance in permanent magnet-assisted synchronous reluctance motor , 2017, 2017 20th International Conference on Electrical Machines and Systems (ICEMS).

[10]  Pragasen Pillay,et al.  Torque Characterization of a Synchronous Reluctance Machine Using an Analytical Model , 2016, IEEE Transactions on Transportation Electrification.

[11]  Peter Sergeant,et al.  Effects of cutting and annealing of amorphous materials for high speed permanent magnet machines , 2016, 2016 XXII International Conference on Electrical Machines (ICEM).

[12]  H. Herzog,et al.  Magnetic Properties of Electrical Steel Sheets in Respect of Cutting: Micromagnetic Analysis and Macromagnetic Modeling , 2016, IEEE Transactions on Magnetics.

[13]  U. Herr,et al.  Investigation of the influence of different cutting procedures on the global and local magnetic properties of non-oriented electrical steel , 2015 .

[14]  Annette Muetze,et al.  Influences of CO2 Laser, FKL Laser, and Mechanical Cutting on the Magnetic Properties of Electrical Steel Sheets , 2015, IEEE Transactions on Industry Applications.

[15]  Nicola Bianchi,et al.  Eccentricity in Synchronous Reluctance Motors—Part I: Analytical and Finite-Element Models , 2015, IEEE Transactions on Energy Conversion.

[16]  Nicola Bianchi,et al.  Eccentricity in Synchronous Reluctance Motors—Part II: Different Rotor Geometry and Stator Windings , 2015, IEEE Transactions on Energy Conversion.

[17]  Ludmila Lavrinovicha,et al.  Comparison of permanent magnet synchronous motor and synchronous reluctance motor based on their torque per unit volume , 2014, 2014 Electric Power Quality and Supply Reliability Conference (PQ).

[18]  Daichi Azuma,et al.  Acoustic and Soft Magnetic Properties in Amorphous Alloy-Based Distribution Transformer Cores , 2013, IEEE Transactions on Magnetics.

[19]  Shigeo Morimoto,et al.  Performance evaluation of a high power density PMASynRM with ferrite magnets , 2011 .

[20]  T. Jahns,et al.  Torque Ripple Reduction in Interior Permanent Magnet Synchronous Machines Using Stators With Odd Number of Slots Per Pole Pair , 2010, IEEE Transactions on Energy Conversion.

[21]  N. Bianchi,et al.  Rotor Flux-Barrier Design for Torque Ripple Reduction in Synchronous Reluctance and PM-Assisted Synchronous Reluctance Motors , 2009, IEEE Transactions on Industry Applications.