A study of pre-cooling impacts on peak demand limiting in commercial buildings

Peak demand cost usually contributes a considerable amount to the monthly electricity bills of commercial buildings, even up to 50%. Peak demand limiting is an effective way to minimize the bill, which has received attention from both academia and industry. However, existent studies do not systematically analyze the impacts of pre-cooling on the peak demand limiting in commercial buildings. This article presents a study to discuss the impacts of pre-cooling temperature and duration in two different types of buildings (i.e., a passive building and a building with phase change material) with and without use of the developed peak demand limiting method (i.e., proportional-integral-derivative peak demand limiting algorithm). The study compares the energy increase and peak demand reduction with a reference case as the benchmark at different pre-cooling temperatures and durations. A demand reduction effective index is introduced to evaluate the effectiveness of peak demand limiting in cost of energy rise. The results from the studies are shown to be useful for selecting proper pre-cooling temperature and duration for high-demand reduction effective index in peak demand limiting controls and for supporting the application of phase change material in reducing peak demand in commercial buildings.

[1]  M. Hawlader,et al.  Microencapsulated PCM thermal-energy storage system , 2003 .

[2]  Viktoria Martin,et al.  Direct contact PCM-water cold storage , 2010 .

[3]  Kunping Lin,et al.  Thermal analysis of a direct-gain room with shape-stabilized PCM plates , 2008 .

[4]  James E. Braun,et al.  Evaluation of methods for determining demand-limiting setpoint trajectories in buildings using short-term measurements , 2008 .

[5]  Gregor P. Henze,et al.  Advances in Near-Optimal Control of Passive Building Thermal Storage , 2010 .

[6]  Ye Hong,et al.  Preparation of polyethylene–paraffin compound as a form-stable solid-liquid phase change material , 2000 .

[7]  Gregor P. Henze.  Energy and Cost Minimal Control of Active and Passive Building Thermal Storage Inventory , 2005 .

[8]  Philip Haves,et al.  Demand Shifting With Thermal Mass in Large Commercial Buildings: Field Tests, Simulation and Audits , 2005 .

[9]  A. Maldonado,et al.  Physical properties of ZnO:F obtained from a fresh and aged solution of zinc acetate and zinc acetylacetonate , 2006 .

[10]  T. Y. Chen,et al.  Real-time predictive supervisory operation of building thermal systems with thermal mass , 2001 .

[11]  Xu Xu,et al.  Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates , 2004 .

[12]  E. Ghanbari,et al.  Obtaining an energy storing building material by direct incorporation of an organic phase change material in gypsum wallboard , 1991 .

[13]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[14]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[15]  Kyoung-ho Leea,et al.  Development of methods for determining demand-limiting setpoint trajectories in buildings using short-term measurements , 2007 .

[16]  István T. Horváth,et al.  Development of Methods , 2008 .

[17]  John E. Seem,et al.  Adaptive Demand Limiting Control Using Load Shedding , 1995 .

[18]  J. Braun,et al.  Model-based demand-limiting control of building thermal mass , 2008 .

[19]  D. A. Neeper,et al.  Thermal dynamics of wallboard with latent heat storage , 2000 .

[20]  H. Inaba,et al.  Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material , 1997 .

[21]  Peter B. Luh,et al.  An Optimization-Based Approach for Facility Energy Management with Uncertainties , 2005 .

[22]  Shengwei Wang,et al.  A demand limiting strategy for maximizing monthly cost savings of commercial buildings , 2010 .

[23]  Xinhua Xu,et al.  A simplified dynamic model of building structures integrated with shaped-stabilized phase change materials , 2010 .

[24]  Na Zhu,et al.  Dynamic characteristics and energy performance of buildings using phase change materials: A review , 2009 .

[25]  David Martz,et al.  Development Methods , 2014, Design and Development of Training Games.

[26]  Shengwei Wang,et al.  Dynamic simulation of a building central chilling system and evaluation of EMCS on-line control strategies , 1998 .

[27]  Peter Schossig,et al.  Micro-encapsulated phase-change materials integrated into construction materials , 2005 .