Flexible testing platform for employment of RFID-enabled multi-agent system on flexible assembly line

Abstract The success of a flexible assembly line (FAL) depends on efficacious scheduling and control architecture. However, the scheduling and control architectures currently employed in FALs lack the flexibility and reconfiguration capacity to manage disturbances when they occur. Consequently, the system performance rapidly degrades when the system operation is interrupted. The objective of this study is to examine the potential enhancement of FAL performance through the use of a radio-frequency-identification-enabled multi-agent scheduling and control system (RFID-enabled MASCS). A simulation test platform is developed for the examination of an RFID-enabled MASCS in a FAL, and several system performance measures are considered in the simulation test platform. The results indicate that the RFID-enabled MASCS can increase the uptime productivity and production rate of a FAL. A real case-study test is performed, and a 22% decrease in lead time along with significant improvements in other system performance indicators are observed, especially when a series of disturbances occur within the examined assembly machine.

[1]  Javier Martínez,et al.  A Petri net based deadlock prevention policy for flexible manufacturing systems , 1995, IEEE Trans. Robotics Autom..

[2]  Andrea Matta,et al.  Analytical evaluation of the output variability in production systems with general Markovian structure , 2014, OR Spectr..

[3]  Ali Vatankhah Barenji,et al.  A multi-agent RFID-enabled distributed control system for a flexible manufacturing shop , 2014 .

[4]  Simon Peck,et al.  Practice of Petri Nets in Manufacturing , 1993 .

[5]  Ray Y. Zhong,et al.  A big data approach for logistics trajectory discovery from RFID-enabled production data , 2015 .

[6]  Roy Want,et al.  An introduction to RFID technology , 2006, IEEE Pervasive Computing.

[7]  Damien Trentesaux,et al.  Distributed control of production systems , 2009, Eng. Appl. Artif. Intell..

[8]  Douglas H. Norrie,et al.  Agent-Based Systems for Intelligent Manufacturing: A State-of-the-Art Survey , 1999, Knowledge and Information Systems.

[9]  A. G. U Lso,et al.  Reconfigurable manufacturing systems: Key to future manufacturing , 2000 .

[10]  Ali Vatankhah Barenji,et al.  An RFID - based distributed control system for flexible manufacturing system , 2013 .

[11]  Hendrik Van Brussel,et al.  Multi-Agent Manufacturing Control: An Industrial Case Study , 2003 .

[12]  Reza Vatankhah Barenji,et al.  An RFID-enabled distributed control and monitoring system for a manufacturing system , 2013, Third International Conference on Innovative Computing Technology (INTECH 2013).

[13]  Ali Vatankhah Barenji,et al.  Structural Modeling of a RFID-enabled Reconfigurable Architecture for a Flexible Manufacturing System , 2013 .

[14]  Ray Y. Zhong,et al.  A two-level advanced production planning and scheduling model for RFID-enabled ubiquitous manufacturing , 2015, Adv. Eng. Informatics.

[15]  Reza Vatankhah Barenji.  Towards a Capability-Based Decision Support System for a Manufacturing Shop , 2013, PRO-VE.

[16]  Nikolay Mehandjiev,et al.  Agent-based optimisation of logistics and production planning , 2003 .

[17]  Barış Tan,et al.  Effects of variability on the due-time performance of a continuous materials flow production system in series , 1998 .

[18]  M. Hashemipour,et al.  Toward a framework for intra-enterprise competency modeling , 2012, 2012 2nd International Conference on Advances in Computational Tools for Engineering Applications (ACTEA).

[19]  J. C. Jiang,et al.  Finding influential agent groups in complex multiagent software systems based on citation network analyses , 2015, Adv. Eng. Softw..

[20]  Paulo Leitão,et al.  Intelligent products: The grace experience , 2015 .

[21]  Jose Arturo Garza-Reyes,et al.  A multi-agent architecture for outsourcing SMEs manufacturing supply chain , 2015 .

[22]  Paulo Leitão,et al.  Agent-based distributed manufacturing control: A state-of-the-art survey , 2009, Eng. Appl. Artif. Intell..

[23]  Naiqi Wu,et al.  System Modeling and Control with Resource-Oriented Petri Nets , 2009 .

[24]  Paulo Leitão,et al.  An agile and adaptive holonic architecture for manufacturing control , 2004 .

[25]  Ali Vatankhah Barenji,et al.  A FRAMEWORK FOR STRUCTURAL MODELLING OF AN RFID-ENABLED INTELLIGENT DISTRIBUTED MANUFACTURING CONTROL SYSTEM , 2014 .

[26]  M. Zhao,et al.  RFID-enabled real-time production management system for Loncin motorcycle assembly line , 2012, Int. J. Comput. Integr. Manuf..

[27]  Reza Vatankhah Barenji,et al.  Enterprise Competency Modeling - A Case Study , 2014, DoCEIS.

[28]  Paul Davidsson,et al.  Agent Based Social Simulation: A Computer Science View , 2002, J. Artif. Soc. Soc. Simul..

[29]  Dong Liang,et al.  Structural health monitoring system based on multi-agent coordination and fusion for large structure , 2015, Adv. Eng. Softw..

[30]  Sanjay E. Sarma,et al.  Auto ID systems and intelligent manufacturing control , 2003 .

[31]  Jan Holmström,et al.  Intelligent Products: A survey , 2009, Comput. Ind..

[32]  David A. Guerra-Zubiaga,et al.  A framework for modelling enterprise competencies: from theory to practice in enterprise architecture , 2015, Int. J. Comput. Integr. Manuf..

[33]  Günter Hommel,et al.  Modelling and Evaluation of Manufacturing Systems Using Dedicated Petri Nets , 1999 .

[34]  Ray Y. Zhong,et al.  Visualization of RFID-enabled shopfloor logistics Big Data in Cloud Manufacturing , 2015, The International Journal of Advanced Manufacturing Technology.

[35]  José Barbosa,et al.  Dynamic self-organization in holonic multi-agent manufacturing systems: The ADACOR evolution , 2015, Comput. Ind..