The design of a shallow trench isolation (STI) for sub-0.13 /spl mu/m CMOS technologies is described in this paper. The areas addressed and key results of the STI are as follows. (a) A deep UV lithography with a surface imaging resist can define trench openings down to 0.12 /spl mu/m with good linearity. (b) A new high density plasma (HDP) CVD oxide process is able to fill 0.16 /spl mu/m wide and 0.5 /spl mu/m deep trenches without voids and to maintain good junction leakage and charge to breakdown (Q/sub bd/). (c) Optimized Nwell/Pwell implant doses and well and channel stop (CS) implant energies are described using both experimental data and tuned device simulations. Interwell (N/sup +/-to-Nwell and P/sup +/-to-Pwell) isolation of 0.15 /spl mu/m or N/sup +/-to-P/sup +/ spacing of 0.3 /spl mu/m, and intrawell (N/sup +/-to-N/sup +/ and P/sup +/-to-P/sup +/) isolation of 0.12 /spl mu/m have been achieved. Latch-up is shown to correlate well with /spl alpha//sub NPN/+/spl alpha//sub PNP/, the sum of the common base current gains of the parasitic NPN and PNP transistors. Good latch-up (holding voltage>1.5 V) has been achieved using 0.5 /spl mu/m deep trench with optimized CS and well implant conditions.