Simulation-based design process of smart machines

This publication is intended to serve as a key to the results of the research project ‘Simulation-based design process of smart machines (KONEMASINA)’. The basic idea of the project was that the simultaneous design of different technical processes is inevitable in order to develop modern, optimized products. The project had three principal themes: simulation-based design, control of machine reliability and operability and the interaction between these two. The project included development of simulation-based design processes and particularly application of computer simulation tools and methods on these processes, and actual modellingand simulation-related practices in managing complex sub-models as well as an overall system simulation model base. Methods and tools were developed for the use of real-time simulators and virtual technologies in the product development process, such as condition monitoring, operator training and determination of a customer’s needs regarding new procedures and products. The practical process of determining dynamic properties of components for simulation work was developed. This study aims to enhanced simulation model with adequate methods and tools focused on an interactive human machine system. A new concept for modeland simulation-based machine operability and reliability was studied. This publication also represents methods for reliability analysis and real time simulation applications, as well as load monitoring applications and solutions for estimating remaining lifetime. Methods to control safety and reliability in product design, applications of probability-based design methods and ways to control various uncertainties were studied.

[1]  Gerhard Pahl,et al.  Konstruktionslehre : Handbuch für Studium und Praxis , 1977 .

[2]  J. L. Carter,et al.  Somatotyping-development and applications , 1990 .

[3]  D. Anton.  Occupational biomechanics , 1986 .

[4]  Karl T. Ulrich,et al.  Product Design and Development , 1995 .

[5]  Jorma Pitkänen,et al.  Dissimilar metal weld joints and their performance in nuclear power plant and oil refinery conditions , 2006 .

[6]  J. Barbera,et al.  Contact mechanics , 1999 .

[7]  Terje Aven,et al.  Quantifying uncertainty under a predictive, epistemic approach to risk analysis , 2002, Reliab. Eng. Syst. Saf..

[8]  Dorian Pyle,et al.  Data Preparation for Data Mining , 1999 .

[9]  Eveliina Takasuo,et al.  Modeling of Pressurizer Using APROS and TRACE Thermal Hydraulic Codes , 2005 .

[10]  J. Ilonen,et al.  Diagnosis tool for motor condition monitoring , 2005, IEEE Transactions on Industry Applications.

[11]  Teuvo Kohonen,et al.  The self-organizing map , 1990 .

[12]  E. Haug,et al.  Generalized Coordinate Partitioning for Dimension Reduction in Analysis of Constrained Dynamic Systems , 1982 .

[13]  Jyh-Horng Wu,et al.  Dynamic properties of rubber vibration isolators and antivibration performance of a nanoclay‐modified silicone/poly(propylene oxide)–poly(ethylene oxide) copolymer with 20 wt % LiClO4 blend system , 2006 .

[14]  Ykä Marjanen.  Whole Body Vibration Measurements and Calculations of the Daily 8-hour Values in Finnish Working Environments , 2005 .

[15]  Tarja Häkkinen,et al.  Metlan Joensuun tutkimuskeskuksen ympäristö- ja elinkaarinäkökohtien arviointi , 2006 .

[16]  Marjut Suomalainen,et al.  Gasification of shredder residue , 2006 .

[17]  E. J. Haug,et al.  Computer aided kinematics and dynamics of mechanical systems. Vol. 1: basic methods , 1989 .

[18]  Victor Wowk,et al.  Machinery Vibration: Measurement and Analysis , 1991 .

[19]  Asko Rouvinen,et al.  Multibody Simulation Formulations in Fault Diagnosis of a Reel , 2005 .

[20]  Javier García de Jalón,et al.  Kinematic and Dynamic Simulation of Multibody Systems: The Real Time Challenge , 1994 .

[21]  Asko Rouvinen,et al.  Multi-body simulation approach for fault diagnosis of a reel , 2006 .

[22]  William D. Rowe,et al.  Decision-Making with Heterogeneous Sources of Information , 1999 .

[23]  Kaj Helin,et al.  Virtual Environment Based Procedure for Production Task Evaluation and Design , 2003 .

[24]  H. O. Fuchs,et al.  Metal fatigue in engineering , 2001 .

[25]  I. Elishakoff.  Essay on uncertainties in elastic and viscoelastic structures: From A. M. Freudenthal's criticisms to modern convex modeling , 1995 .

[26]  Geraint W Owen,et al.  Scandinavian International Conference on Fluid Power, SICFP'05 , 2005 .

[27]  Timo Pättikangas,et al.  Modelling of multiphase chemical reactors (ModCheR): Final report , 2006 .

[28]  Juhani Viitanicmi,et al.  A CONCEPT FOR SAFETY AND DEPENDABILITY INFORMATION EXPLOITATION IN MAINTENANCE PLANNING AND PRODUCT DEVELOPMENT , 2004 .

[29]  S. P. Leino,et al.  Human comfort and safety analysis in virtual case prototyping: Off-road vehicle , 2002 .

[30]  Simo-Pekka Leino,et al.  Dynamics Simulation and Comfort Analysis of Human-Vehicle Systems , 2002 .

[31]  Juhani Viitaniemi,et al.  Safety design by using three-dimensional simulation models , 1996 .

[32]  Kathleen V. Diegert,et al.  Error and uncertainty in modeling and simulation , 2002, Reliab. Eng. Syst. Saf..

[33]  M. A. Serna,et al.  Dynamic analysis of plane mechanisms with lower pairs in basic coordinates , 1982 .

[34]  Mikko Asikainen.  Mekatronisten koneiden reaaliaikainen simulointi Linux-ympäristössä , 2003 .

[35]  Christophe Pierre,et al.  Statistical Approximations of Power Flow for a Vehicle Structure With Uncertainties , 2003 .

[36]  Antti Martikainen.  Ilmastonmuutoksen vaikutus sähköverkkoliiketoimintaan , 2006 .

[37]  K. J. Vicente,et al.  Cognitive Work Analysis: Toward Safe, Productive, and Healthy Computer-Based Work , 1999 .

[38]  T. Ahlroos,et al.  Reliability Analysis Based on Crosstabulation: A Novel Method , 2005 .

[39]  M. A. Serna,et al.  A modified Lagrangian formulation for the dynamic analysis of constrained mechanical systems , 1988 .

[40]  Ville Ollikainen,et al.  "Kato, nyt sää oot telkkarissa": Digitaalinen LähiTV paikallisyhteisöjen viestinnässä , 2006 .

[41]  I. Elishakoff,et al.  Bounds of eigenvalues for structures with an interval description of uncertain-but-non-random parameters , 1996 .

[42]  A. Almar-Næss.  Fatigue handbook : offshore steel structures , 1985 .

[43]  Asko Riitahuhta,et al.  Integrated Usage of Simulation Tools in Product Development , 2006 .

[44]  Asko Rouvinen,et al.  Multibody Approach for Model-Based Fault Detection of a Reel , 2006 .

[45]  Teuvo Kohonen,et al.  The self-organizing map , 1990, Neurocomputing.

[46]  Roger G. Ghanem,et al.  An equation-free, multiscale approach to uncertainty quantification , 2005, Computing in Science & Engineering.

[47]  George A. Hazelrigg,et al.  Thoughts on Model Validation for Engineering Design , 2003 .

[48]  Fulvio Tonon.  Using random set theory to propagate epistemic uncertainty through a mechanical system , 2004, Reliab. Eng. Syst. Saf..

[49]  O. Simula,et al.  The Self-organizing map as a tool in knowledge engineering , 2000 .

[50]  Asko Rouvinen,et al.  MEKANISMIEN DYNAMIIKAN SIMULOINNISSA SOVELLETTAVIA NUMEERISIA- JA MALLINNUSMENETELMIÄ , 2003 .

[51]  Jens Rasmussen,et al.  Information Processing and Human-Machine Interaction: An Approach to Cognitive Engineering , 1986 .

[52]  G. Schuëller.  A state-of-the-art report on computational stochastic mechanics , 1997 .

[53]  J. H. Starnes,et al.  The bound set of possible eigenvalues of structures with uncertain but non-random parameters , 1996 .

[54]  M. Jorkama.  The role of analytical winding dynamics in winder design , 1998 .

[55]  Katri Valkokari,et al.  Yritysverkoston strateginen kehittäminen ; The strategic development of network enterprises , 2006 .

[56]  Waldemar Karwowski,et al.  Computer applications in ergonomics, occupational safety and health : proceedings of the International Conference on Computer-Aided Ergonomics and Safety '92 - CAES '92, Tampere, Finland, 18-20 May, 1992 , 1992 .